Got a 'new' T3-1. started server and went initial configuration.
There were choice of many nic card and selected default to configure IP, etc but once OS is up and running, I cannot ping the server.
At the back, we have Net0, Net1, Net2 and Net3. also a couple of PCIe2 cards with 4 ethernet ports.
The default nic card should be Net0, I believe.

From Solaris, I got the following:

# dladm show-link
nxge0 type: non-vlan mtu: 1500 device: nxge0
nxge1 type: non-vlan mtu: 1500 device: nxge1
nxge2 type: non-vlan mtu: 1500 device: nxge2
nxge3 type: non-vlan mtu: 1500 device: nxge3
igb0 type: non-vlan mtu: 1500 device: igb0
igb1 type: non-vlan mtu: 1500 device: igb1
igb2 type: non-vlan mtu: 1500 device: igb2
igb3 type: non-vlan mtu: 1500 device: igb3
nxge4 type: non-vlan mtu: 1500 device: nxge4
nxge5 type: non-vlan mtu: 1500 device: nxge5
nxge6 type: non-vlan mtu: 1500 device: nxge6
nxge7 type: non-vlan mtu: 1500 device: nxge7
usbecm0 type: non-vlan mtu: 1500 device: usbecm0


# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 179 0 179 0 0 0
nxge0 1500 sunrise sunrise 0 0 0 0 0 0
usbecm0 1500 usbsunrise usbsunrise 5 0 229 0 0 0


nxge0 is the interface that was configured during the initial setup.

Which interface should be the correct one and what are the commmands (or process) to reset the ip address to the correct interface?

Thanks in advance