Network card on T3-1
Got a 'new' T3-1. started server and went initial configuration.
There were choice of many nic card and selected default to configure IP, etc but once OS is up and running, I cannot ping the server. At the back, we have Net0, Net1, Net2 and Net3. also a couple of PCIe2 cards with 4 ethernet ports. The default nic card should be Net0, I believe. From Solaris, I got the following: # dladm show-link nxge0 type: non-vlan mtu: 1500 device: nxge0 nxge1 type: non-vlan mtu: 1500 device: nxge1 nxge2 type: non-vlan mtu: 1500 device: nxge2 nxge3 type: non-vlan mtu: 1500 device: nxge3 igb0 type: non-vlan mtu: 1500 device: igb0 igb1 type: non-vlan mtu: 1500 device: igb1 igb2 type: non-vlan mtu: 1500 device: igb2 igb3 type: non-vlan mtu: 1500 device: igb3 nxge4 type: non-vlan mtu: 1500 device: nxge4 nxge5 type: non-vlan mtu: 1500 device: nxge5 nxge6 type: non-vlan mtu: 1500 device: nxge6 nxge7 type: non-vlan mtu: 1500 device: nxge7 usbecm0 type: non-vlan mtu: 1500 device: usbecm0 # netstat -i Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue lo0 8232 loopback localhost 179 0 179 0 0 0 nxge0 1500 sunrise sunrise 0 0 0 0 0 0 usbecm0 1500 usbsunrise usbsunrise 5 0 229 0 0 0 nxge0 is the interface that was configured during the initial setup. Which interface should be the correct one and what are the commmands (or process) to reset the ip address to the correct interface? Thanks in advance |
All times are GMT -5. The time now is 03:21 AM. |