Hello, I wanted to know if there is any way to make slackware start faster and especially to shut down faster.

When it starts, a screen with letters scrolling very fast appears, as it happens in other operating systems, but in eslackware it is slower.

And when it is turned off, many letters scroll and it takes longer to turn off than to turn on.

Nor is it that it takes a long time to start up and shut down, it's not that I lose sleep, it's in case something can be done without damaging the system, I've searched on google and I haven't found how to do it.

I use full installation of slackware xfce 64 bits.

Thanks.

Greetings.

do you have some numbers? How long does it take at all? What kind of hardware do you have?

1 members found this post helpful.

Hello, I haven't calculated it, but if I calculate it, it's nothing scandalous, but for example linux mint starts faster and above all it shuts down instantly and slackware doesn't and it caught my attention.

Hardware is an i7 and 8g of ram, so it's fine, that's not why, slackware works fine and any distro, but I'd like to see if it's possible for it to start up earlier and, above all, to shut down faster.

I am with generic kernel 5.15.63

Now I'll do some time calculations and tell you.

I have already calculated it. Once grub appears and I select slackware, it takes 32 seconds until the screen that asks for a username and password appears.

And to turn off, once I hit the off button, it takes 19 seconds to turn off and in linux mint xfce the shutdown is almost instantaneous.

What I said before, slackware works wonderfully, I'm super happy with it and it doesn't bother me these days, it's in case there's any way to improve it.

NaboHipersonico --

Do you boot RunLevel 4 or 3 ?

And if RunLevel 4, are you counting the time until the xfce LogIn Dialog appears ?

Thanks

-- kjh

1 members found this post helpful.

Hello. I boot into runlevel 4 and count from when grub appears and select slackware until the screen asking for login and password appears.

1 members found this post helpful.

Three questions:

1) How often do you boot up and shut down?

2) How much faster do you expect it to take?

3) What do you plan to do with the time that you save?

2 members found this post helpful.

You are sure that Linux Mint and Slackware are installed in the same kind of hardware? True, the Linux Mint has systemd, BUT it's not that faster, compared with SysV init of Slackware.

Does not matter so much how much verbose is a Linux distro boot, but the storage matters. The SSDs usually gives much better performances on boot or shutdown, and not only.

Anyway, what the heck of i7 you have, when me one with a Pentium G2120, DDR3 memories and a lame SSD I get a console login on around 5 seconds after hitting enter in GRUB2 screen?

And I talk about a desktop PC with socket 1155, yours which socket have?

1 members found this post helpful.

Yes, they are on the same hardware on a new ssd a sansumg evo 870.

The ram is ddr3.

If it takes 32 seconds from when grub comes out and I select slackware, until I get the screen that asks for the username and password, I think it's because many letters come out, let's say many processes at startup, which may not be necessary , don't know.

Mine is an i7 sandy bridge at 3.2ghz.

Mine is an i7 sandy bridge at 3.2ghz.

-- Sorry this post was by mistake --

It sounds like network timeout to me, something you start at boot is waiting for something remote to respond..
Not aware of anything else in Slackware which adds 20sec to boot, and that machine should boot in 10sec.
In perspective, one of mine is dual core with 4G ram and it's done in 9sec from cold boot to XDM.
Post your "dmesg | tail" it might show some clue/evidence of this delay.

2 members found this post helpful.

[ 0.138883] pci 0000:08:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:02:0a.0 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link)
[ 0.138930] pci 0000:02:0a.0: PCI bridge to [bus 08]
[ 0.138937] pci 0000:02:0a.0: bridge window [mem 0xf8400000-0xf86fffff]
[ 0.139013] pci 0000:09:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.139044] pci 0000:09:00.0: reg 0x10: [mem 0xf8f00000-0xf8f01fff 64bit]
[ 0.139197] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.139319] pci 0000:00:1c.0: PCI bridge to [bus 09]
[ 0.139326] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff]
[ 0.139395] pci 0000:0a:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.139426] pci 0000:0a:00.0: reg 0x10: [mem 0xf8e00000-0xf8e01fff 64bit]
[ 0.139579] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[ 0.139697] pci 0000:00:1c.1: PCI bridge to [bus 0a]
[ 0.139705] pci 0000:00:1c.1: bridge window [mem 0xf8e00000-0xf8efffff]
[ 0.139774] pci 0000:0b:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.139805] pci 0000:0b:00.0: reg 0x10: [mem 0xf8d00000-0xf8d01fff 64bit]
[ 0.139958] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[ 0.140078] pci 0000:00:1c.2: PCI bridge to [bus 0b]
[ 0.140085] pci 0000:00:1c.2: bridge window [mem 0xf8d00000-0xf8dfffff]
[ 0.140144] pci 0000:0c:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.140166] pci 0000:0c:00.0: reg 0x10: [io 0xe040-0xe047]
[ 0.140179] pci 0000:0c:00.0: reg 0x14: [io 0xe030-0xe033]
[ 0.140192] pci 0000:0c:00.0: reg 0x18: [io 0xe020-0xe027]
[ 0.140204] pci 0000:0c:00.0: reg 0x1c: [io 0xe010-0xe013]
[ 0.140217] pci 0000:0c:00.0: reg 0x20: [io 0xe000-0xe00f]
[ 0.140230] pci 0000:0c:00.0: reg 0x24: [mem 0xf8c10000-0xf8c107ff]
[ 0.140243] pci 0000:0c:00.0: reg 0x30: [mem 0xf8c00000-0xf8c0ffff pref]
[ 0.140261] pci 0000:0c:00.0: Enabling fixed DMA alias to 00.1
[ 0.140312] pci 0000:0c:00.0: PME# supported from D3hot
[ 0.140405] pci 0000:00:1c.3: PCI bridge to [bus 0c]
[ 0.140410] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.140415] pci 0000:00:1c.3: bridge window [mem 0xf8c00000-0xf8cfffff]
[ 0.140508] pci 0000:0d:00.0: [197b:2362] type 00 class 0x010601
[ 0.140536] pci 0000:0d:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.140553] pci 0000:0d:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.140569] pci 0000:0d:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.140585] pci 0000:0d:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.140601] pci 0000:0d:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.140617] pci 0000:0d:00.0: reg 0x24: [mem 0xf8b00000-0xf8b001ff]
[ 0.140633] pci 0000:0d:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.140705] pci 0000:0d:00.0: PME# supported from D3hot
[ 0.140820] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.140825] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.140829] pci 0000:00:1c.4: bridge window [mem 0xf8b00000-0xf8bfffff]
[ 0.140900] pci 0000:0e:00.0: [10ec:8168] type 00 class 0x020000
[ 0.140926] pci 0000:0e:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.140959] pci 0000:0e:00.0: reg 0x18: [mem 0xda204000-0xda204fff 64bit pref]
[ 0.140981] pci 0000:0e:00.0: reg 0x20: [mem 0xda200000-0xda203fff 64bit pref]
[ 0.141099] pci 0000:0e:00.0: supports D1 D2
[ 0.141101] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141228] pci 0000:00:1c.5: PCI bridge to [bus 0e]
[ 0.141232] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.141241] pci 0000:00:1c.5: bridge window [mem 0xda200000-0xda2fffff 64bit pref]
[ 0.141305] pci 0000:0f:00.0: [10ec:8168] type 00 class 0x020000
[ 0.141330] pci 0000:0f:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 0.141363] pci 0000:0f:00.0: reg 0x18: [mem 0xda104000-0xda104fff 64bit pref]
[ 0.141384] pci 0000:0f:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref]
[ 0.141501] pci 0000:0f:00.0: supports D1 D2
[ 0.141503] pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141630] pci 0000:00:1c.6: PCI bridge to [bus 0f]
[ 0.141635] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
[ 0.141643] pci 0000:00:1c.6: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[ 0.141711] pci 0000:10:00.0: [10b5:8608] type 01 class 0x060400
[ 0.141734] pci 0000:10:00.0: reg 0x10: [mem 0xf4500000-0xf451ffff]
[ 0.141892] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.145701] pci 0000:00:1c.7: PCI bridge to [bus 10-18]
[ 0.145706] pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
[ 0.145711] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf45fffff]
[ 0.145797] pci 0000:11:01.0: [10b5:8608] type 01 class 0x060400
[ 0.145969] pci 0000:11:01.0: PME# supported from D0 D3hot D3cold
[ 0.146108] pci 0000:11:04.0: [10b5:8608] type 01 class 0x060400
[ 0.146278] pci 0000:11:04.0: PME# supported from D0 D3hot D3cold
[ 0.146417] pci 0000:11:05.0: [10b5:8608] type 01 class 0x060400
[ 0.146588] pci 0000:11:05.0: PME# supported from D0 D3hot D3cold
[ 0.146731] pci 0000:11:06.0: [10b5:8608] type 01 class 0x060400
[ 0.146901] pci 0000:11:06.0: PME# supported from D0 D3hot D3cold
[ 0.147043] pci 0000:11:07.0: [10b5:8608] type 01 class 0x060400
[ 0.147213] pci 0000:11:07.0: PME# supported from D0 D3hot D3cold
[ 0.147358] pci 0000:11:08.0: [10b5:8608] type 01 class 0x060400
[ 0.147529] pci 0000:11:08.0: PME# supported from D0 D3hot D3cold
[ 0.147673] pci 0000:11:09.0: [10b5:8608] type 01 class 0x060400
[ 0.147845] pci 0000:11:09.0: PME# supported from D0 D3hot D3cold
[ 0.147993] pci 0000:10:00.0: PCI bridge to [bus 11-18]
[ 0.148002] pci 0000:10:00.0: bridge window [io 0xa000-0xafff]
[ 0.148008] pci 0000:10:00.0: bridge window [mem 0xf0000000-0xf44fffff]
[ 0.148097] pci 0000:12:00.0: [1102:000b] type 00 class 0x040300
[ 0.148135] pci 0000:12:00.0: reg 0x10: [mem 0xf4200000-0xf420ffff 64bit]
[ 0.148159] pci 0000:12:00.0: reg 0x18: [mem 0xf4000000-0xf41fffff 64bit]
[ 0.148182] pci 0000:12:00.0: reg 0x20: [mem 0xf0000000-0xf3ffffff 64bit]
[ 0.151709] pci 0000:11:01.0: PCI bridge to [bus 12]
[ 0.151721] pci 0000:11:01.0: bridge window [mem 0xf0000000-0xf42fffff]
[ 0.151780] pci 0000:11:04.0: PCI bridge to [bus 13]
[ 0.151843] pci 0000:11:05.0: PCI bridge to [bus 14]
[ 0.151909] pci 0000:11:06.0: PCI bridge to [bus 15]
[ 0.151972] pci 0000:11:07.0: PCI bridge to [bus 16]
[ 0.152064] pci 0000:17:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.152099] pci 0000:17:00.0: reg 0x10: [mem 0xf4400000-0xf44007ff 64bit]
[ 0.152113] pci 0000:17:00.0: reg 0x18: [io 0xa000-0xa0ff]
[ 0.152254] pci 0000:17:00.0: supports D2
[ 0.152256] pci 0000:17:00.0: PME# supported from D2 D3hot D3cold
[ 0.155710] pci 0000:11:08.0: PCI bridge to [bus 17]
[ 0.155719] pci 0000:11:08.0: bridge window [io 0xa000-0xafff]
[ 0.155725] pci 0000:11:08.0: bridge window [mem 0xf4400000-0xf44fffff]
[ 0.155783] pci 0000:11:09.0: PCI bridge to [bus 18]
[ 0.156238] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.156274] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.156309] ACPI: PCI: Interrupt link LNKC configured for IRQ 5
[ 0.156343] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.156377] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.156411] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.156445] ACPI: PCI: Interrupt link LNKG configured for IRQ 3
[ 0.156479] ACPI: PCI: Interrupt link LNKH configured for IRQ 7
[ 0.156705] iommu: Default domain type: Translated
[ 0.156705] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.156705] pci 0000:05:00.0: vgaarb: setting as boot VGA device
[ 0.156705] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.156707] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.156709] vgaarb: loaded
[ 0.156795] SCSI subsystem initialized
[ 0.157703] libata version 3.00 loaded.
[ 0.157703] ACPI: bus type USB registered
[ 0.157715] usbcore: registered new interface driver usbfs
[ 0.157722] usbcore: registered new interface driver hub
[ 0.157732] usbcore: registered new device driver usb
[ 0.157746] pps_core: LinuxPPS API ver. 1 registered
[ 0.157749] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.157753] PTP clock support registered
[ 0.157766] EDAC MC: Ver: 3.0.0
[ 0.157861] Registered efivars operations
[ 0.157861] PCI: Using ACPI for IRQ routing
[ 0.162705] PCI: pci_cache_line_size set to 64 bytes
[ 0.162847] e820: reserve RAM buffer [mem 0xbe576000-0xbfffffff]
[ 0.162850] e820: reserve RAM buffer [mem 0xbf5f4000-0xbfffffff]
[ 0.162851] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.162852] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
[ 0.163710] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.163718] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.165713] clocksource: Switched to clocksource tsc-early
[ 0.170282] VFS: Disk quotas dquot_6.6.0
[ 0.170309] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.170376] pnp: PnP ACPI init
[ 0.170520] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.170527] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.170532] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.170537] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.170541] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.170760] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.170934] pnp 00:02: [dma 0 disabled]
[ 0.171088] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.171306] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.171311] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.171316] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.171325] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.171330] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.171335] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.171340] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.171345] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.171430] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.171662] pnp: PnP ACPI: found 7 devices
[ 0.177563] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.177659] NET: Registered PF_INET protocol family
[ 0.177766] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.179178] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.179198] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.179205] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.179325] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.179461] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.179563] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.179606] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.179632] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.179731] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.179847] RPC: Registered named UNIX socket transport module.
[ 0.179851] RPC: Registered udp transport module.
[ 0.179854] RPC: Registered tcp transport module.
[ 0.179857] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179861] NET: Registered PF_XDP protocol family
[ 0.179880] pci 0000:04:08.0: PCI bridge to [bus 05]
[ 0.179887] pci 0000:04:08.0: bridge window [io 0x9000-0x9fff]
[ 0.179895] pci 0000:04:08.0: bridge window [mem 0xf7000000-0xf80fffff]
[ 0.179902] pci 0000:04:08.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[ 0.179912] pci 0000:04:10.0: PCI bridge to [bus 06]
[ 0.179916] pci 0000:04:10.0: bridge window [io 0x8000-0x8fff]
[ 0.179924] pci 0000:04:10.0: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.179930] pci 0000:04:10.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
[ 0.179940] pci 0000:03:00.0: PCI bridge to [bus 04-06]
[ 0.179945] pci 0000:03:00.0: bridge window [io 0x8000-0x9fff]
[ 0.179952] pci 0000:03:00.0: bridge window [mem 0xf5000000-0xf80fffff]
[ 0.179959] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.179968] pci 0000:02:08.0: PCI bridge to [bus 03-06]
[ 0.179972] pci 0000:02:08.0: bridge window [io 0x8000-0x9fff]
[ 0.179979] pci 0000:02:08.0: bridge window [mem 0xf5000000-0xf81fffff]
[ 0.179984] pci 0000:02:08.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.179992] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 0.180003] pci 0000:02:0a.0: PCI bridge to [bus 08]
[ 0.180009] pci 0000:02:0a.0: bridge window [mem 0xf8400000-0xf86fffff]
[ 0.180017] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 0.180022] pci 0000:01:00.0: bridge window [io 0x8000-0x9fff]
[ 0.180028] pci 0000:01:00.0: bridge window [mem 0xf5000000-0xf86fffff]
[ 0.180033] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.180040] pci 0000:00:01.0: PCI bridge to [bus 01-08]
[ 0.180044] pci 0000:00:01.0: bridge window [io 0x8000-0x9fff]
[ 0.180050] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf89fffff]
[ 0.180055] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.180061] pci 0000:00:1c.0: PCI bridge to [bus 09]
[ 0.180068] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff]
[ 0.180079] pci 0000:00:1c.1: PCI bridge to [bus 0a]
[ 0.180085] pci 0000:00:1c.1: bridge window [mem 0xf8e00000-0xf8efffff]
[ 0.180095] pci 0000:00:1c.2: PCI bridge to [bus 0b]
[ 0.180102] pci 0000:00:1c.2: bridge window [mem 0xf8d00000-0xf8dfffff]
[ 0.180112] pci 0000:00:1c.3: PCI bridge to [bus 0c]
[ 0.180117] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.180124] pci 0000:00:1c.3: bridge window [mem 0xf8c00000-0xf8cfffff]
[ 0.180136] pci 0000:0d:00.0: BAR 6: assigned [mem 0xf8b10000-0xf8b1ffff pref]
[ 0.180142] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.180147] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.180154] pci 0000:00:1c.4: bridge window [mem 0xf8b00000-0xf8bfffff]
[ 0.180164] pci 0000:00:1c.5: PCI bridge to [bus 0e]
[ 0.180168] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.180177] pci 0000:00:1c.5: bridge window [mem 0xda200000-0xda2fffff 64bit pref]
[ 0.180187] pci 0000:00:1c.6: PCI bridge to [bus 0f]
[ 0.180191] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
[ 0.180200] pci 0000:00:1c.6: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[ 0.180210] pci 0000:11:01.0: PCI bridge to [bus 12]
[ 0.180218] pci 0000:11:01.0: bridge window [mem 0xf0000000-0xf42fffff]
[ 0.180232] pci 0000:11:04.0: PCI bridge to [bus 13]
[ 0.180250] pci 0000:11:05.0: PCI bridge to [bus 14]
[ 0.180268] pci 0000:11:06.0: PCI bridge to [bus 15]
[ 0.180286] pci 0000:11:07.0: PCI bridge to [bus 16]
[ 0.180305] pci 0000:11:08.0: PCI bridge to [bus 17]
[ 0.180310] pci 0000:11:08.0: bridge window [io 0xa000-0xafff]
[ 0.180319] pci 0000:11:08.0: bridge window [mem 0xf4400000-0xf44fffff]
[ 0.180333] pci 0000:11:09.0: PCI bridge to [bus 18]
[ 0.180350] pci 0000:10:00.0: PCI bridge to [bus 11-18]
[ 0.180356] pci 0000:10:00.0: bridge window [io 0xa000-0xafff]
[ 0.180365] pci 0000:10:00.0: bridge window [mem 0xf0000000-0xf44fffff]
[ 0.180378] pci 0000:00:1c.7: PCI bridge to [bus 10-18]
[ 0.180383] pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
[ 0.180390] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf45fffff]
[ 0.180401] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.180406] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.180410] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.180414] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.180419] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.180423] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.180427] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.180432] pci_bus 0000:01: resource 0 [io 0x8000-0x9fff]
[ 0.180436] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf89fffff]
[ 0.180441] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.180446] pci_bus 0000:02: resource 0 [io 0x8000-0x9fff]
[ 0.180450] pci_bus 0000:02: resource 1 [mem 0xf5000000-0xf86fffff]
[ 0.180454] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.180459] pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
[ 0.180463] pci_bus 0000:03: resource 1 [mem 0xf5000000-0xf81fffff]
[ 0.180467] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.180472] pci_bus 0000:04: resource 0 [io 0x8000-0x9fff]
[ 0.180476] pci_bus 0000:04: resource 1 [mem 0xf5000000-0xf80fffff]
[ 0.180480] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
[ 0.180485] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 0.180490] pci_bus 0000:05: resource 1 [mem 0xf7000000-0xf80fffff]
[ 0.180494] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
[ 0.180499] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
[ 0.180503] pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf60fffff]
[ 0.180507] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc9ffffff 64bit pref]
[ 0.180512] pci_bus 0000:08: resource 1 [mem 0xf8400000-0xf86fffff]
[ 0.180517] pci_bus 0000:09: resource 1 [mem 0xf8f00000-0xf8ffffff]
[ 0.180521] pci_bus 0000:0a: resource 1 [mem 0xf8e00000-0xf8efffff]
[ 0.180526] pci_bus 0000:0b: resource 1 [mem 0xf8d00000-0xf8dfffff]
[ 0.180530] pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
[ 0.180534] pci_bus 0000:0c: resource 1 [mem 0xf8c00000-0xf8cfffff]
[ 0.180538] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff]
[ 0.180543] pci_bus 0000:0d: resource 1 [mem 0xf8b00000-0xf8bfffff]
[ 0.180547] pci_bus 0000:0e: resource 0 [io 0xc000-0xcfff]
[ 0.180551] pci_bus 0000:0e: resource 2 [mem 0xda200000-0xda2fffff 64bit pref]
[ 0.180556] pci_bus 0000:0f: resource 0 [io 0xb000-0xbfff]
[ 0.180560] pci_bus 0000:0f: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
[ 0.180565] pci_bus 0000:10: resource 0 [io 0xa000-0xafff]
[ 0.180569] pci_bus 0000:10: resource 1 [mem 0xf0000000-0xf45fffff]
[ 0.180573] pci_bus 0000:11: resource 0 [io 0xa000-0xafff]
[ 0.180577] pci_bus 0000:11: resource 1 [mem 0xf0000000-0xf44fffff]
[ 0.180582] pci_bus 0000:12: resource 1 [mem 0xf0000000-0xf42fffff]
[ 0.180587] pci_bus 0000:17: resource 0 [io 0xa000-0xafff]
[ 0.180591] pci_bus 0000:17: resource 1 [mem 0xf4400000-0xf44fffff]
[ 0.181026] pci 0000:05:00.1: D0 power state depends on 0000:05:00.0
[ 0.181070] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
[ 0.181540] PCI: CLS 64 bytes, default 64
[ 0.181548] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.181552] software IO TLB: mapped [mem 0x00000000ba576000-0x00000000be576000] (64MB)
[ 0.181623] Trying to unpack rootfs image as initramfs...
[ 0.189785] Initialise system trusted keyrings
[ 0.189802] Key type blacklist registered
[ 0.189833] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.190967] zbud: loaded
[ 0.191156] NFS: Registering the id_resolver key type
[ 0.191163] Key type id_resolver registered
[ 0.191165] Key type id_legacy registered
[ 0.191182] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.191186] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.191192] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.199620] xor: automatically using best checksumming function avx
[ 0.199624] async_tx: api initialized (async)
[ 0.199626] Key type asymmetric registered
[ 0.199629] Asymmetric key parser 'x509' registered
[ 0.199646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.199677] io scheduler mq-deadline registered
[ 0.199742] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.199878] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[ 0.199996] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 0.200092] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[ 0.200183] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
[ 0.200317] pcieport 0000:00:1c.3: PME: Signaling with IRQ 28
[ 0.200441] pcieport 0000:00:1c.4: PME: Signaling with IRQ 29
[ 0.200566] pcieport 0000:00:1c.5: PME: Signaling with IRQ 30
[ 0.200696] pcieport 0000:00:1c.6: PME: Signaling with IRQ 31
[ 0.200820] pcieport 0000:00:1c.7: PME: Signaling with IRQ 32
[ 0.205036] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.205090] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.207281] brd: module loaded
[ 0.207485] ahci 0000:00:1f.2: version 3.0
[ 0.217716] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
[ 0.217725] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.221104] scsi host0: ahci
[ 0.221315] scsi host1: ahci
[ 0.221407] scsi host2: ahci
[ 0.221497] scsi host3: ahci
[ 0.221594] scsi host4: ahci
[ 0.221691] scsi host5: ahci
[ 0.221736] ata1: DUMMY
[ 0.221740] ata2: SATA max UDMA/133 abar m2048@0xf4605000 port 0xf4605180 irq 44
[ 0.221746] ata3: SATA max UDMA/133 abar m2048@0xf4605000 port 0xf4605200 irq 44
[ 0.221751] ata4: DUMMY
[ 0.221753] ata5: DUMMY
[ 0.221756] ata6: DUMMY
[ 0.221873] ahci 0000:0c:00.0: controller can do FBS, turning on CAP_FBS
[ 0.232766] ahci 0000:0c:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.232775] ahci 0000:0c:00.0: flags: 64bit ncq fbs pio
[ 0.233513] scsi host6: ahci
[ 0.233614] scsi host7: ahci
[ 0.233722] scsi host8: ahci
[ 0.233901] scsi host9: ahci
[ 0.234067] scsi host10: ahci
[ 0.234186] scsi host11: ahci
[ 0.234282] scsi host12: ahci
[ 0.234377] scsi host13: ahci
[ 0.234424] ata7: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10100 irq 45
[ 0.234431] ata8: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10180 irq 45
[ 0.234437] ata9: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10200 irq 45
[ 0.234443] ata10: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10280 irq 45
[ 0.234448] ata11: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10300 irq 45
[ 0.234454] ata12: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10380 irq 45
[ 0.234460] ata13: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10400 irq 45
[ 0.234466] ata14: SATA max UDMA/133 abar m2048@0xf8c10000 port 0xf8c10480 irq 45
[ 0.234618] ahci 0000:0d:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.234627] ahci 0000:0d:00.0: flags: 64bit ncq led clo pmp pio
[ 0.234873] scsi host14: ahci
[ 0.234967] scsi host15: ahci
[ 0.235013] ata15: SATA max UDMA/133 abar m512@0xf8b00000 port 0xf8b00100 irq 16
[ 0.235020] ata16: SATA max UDMA/133 abar m512@0xf8b00000 port 0xf8b00180 irq 16
[ 0.236038] scsi host16: pata_legacy
[ 0.236081] ata17: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 0.312927] Freeing initrd memory: 10768K
[ 0.533737] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.533768] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.537827] ata2.00: supports DRM functions and may not be fully accessible
[ 0.537839] ata2.00: ATA-11: Samsung SSD 870 EVO 500GB, SVT02B6Q, max UDMA/133
[ 0.538390] ata2.00: disabling queued TRIM support
[ 0.538397] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.540713] ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 0.541136] ata2.00: supports DRM functions and may not be fully accessible
[ 0.541545] ata2.00: disabling queued TRIM support
[ 0.541736] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.541741] ata16: SATA link down (SStatus 0 SControl 300)
[ 0.541805] ata9: SATA link down (SStatus 0 SControl 300)
[ 0.541812] ata15: SATA link down (SStatus 0 SControl 300)
[ 0.541820] ata3.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133
[ 0.541852] ata12: SATA link down (SStatus 0 SControl 300)
[ 0.541881] ata8: SATA link down (SStatus 0 SControl 300)
[ 0.541914] ata11: SATA link down (SStatus 0 SControl 300)
[ 0.541943] ata13: SATA link down (SStatus 0 SControl 300)
[ 0.541973] ata10: SATA link down (SStatus 0 SControl 300)
[ 0.543975] ata2.00: configured for UDMA/133
[ 0.545868] ata3.00: configured for UDMA/133
[ 0.549725] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.549845] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 0.550062] ata14.00: configured for UDMA/66
[ 1.199730] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[ 1.199748] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
[ 1.199822] clocksource: Switched to clocksource tsc
[ 3.247754] floppy0: no floppy controllers found
[ 3.248103] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 870 2B6Q PQ: 0 ANSI: 5
[ 3.248555] ata2.00: Enabling discard_zeroes_data
[ 3.248708] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.248726] sd 1:0:0:0: [sda] Write Protect is off
[ 3.248730] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.248789] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.249067] ata2.00: Enabling discard_zeroes_data
[ 3.257269] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5
[ 3.260954] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 3.261238] ata2.00: Enabling discard_zeroes_data
[ 3.267051] sd 1:0:0:0: [sda] supports TCG Opal
[ 3.267056] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.338801] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.338808] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.374877] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.375456] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 3.381322] scsi host16: pata_legacy
[ 3.381356] ata18: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 3.548045] i8042: PNP: No PS/2 controller found.
[ 3.548209] mousedev: PS/2 mouse device common for all mice
[ 3.548249] rtc_cmos 00:03: RTC can wake from S4
[ 3.548506] rtc_cmos 00:03: registered as rtc0


First part of dmesg, it gives me a result of 17 pages that I will have to divide into several posts, because the forum accepts a maximum of 30000 characters

[ 3.548523] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.548893] device-mapper: uevent: version 1.0.3
[ 3.548973] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 3.548980] intel_pstate: Intel P-state driver initializing
[ 3.549536] efifb: probing for efifb
[ 3.549569] efifb: framebuffer at 0xd9000000, using 3072k, total 3072k
[ 3.549575] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 3.549580] efifb: scrolling: redraw
[ 3.549583] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.552399] Console: switching to colour frame buffer device 128x48
[ 3.555035] fb0: EFI VGA frame buffer device
[ 3.555072] EFI Variables Facility v0.08 2004-May-17
[ 3.609606] Initializing XFRM netlink socket
[ 3.609626] NET: Registered PF_PACKET protocol family
[ 3.609774] Key type dns_resolver registered
[ 3.610307] microcode: sig=0x206a7, pf=0x2, revision=0x25
[ 3.610528] microcode: Microcode Update Driver: v2.2.
[ 3.610534] IPI shorthand broadcast: enabled
[ 3.610593] AVX version of gcm_enc/dec engaged.
[ 3.610715] AES CTR mode by8 optimization enabled
[ 3.611731] sched_clock: Marking stable (3611363706, 351609)->(3991888435, -380173120)
[ 3.612215] registered taskstats version 1
[ 3.612247] Loading compiled-in X.509 certificates
[ 3.612364] zswap: loaded using pool lzo/zbud
[ 3.613132] Key type ._fscrypt registered
[ 3.613164] Key type .fscrypt registered
[ 3.613189] Key type fscrypt-provisioning registered
[ 3.616498] Key type encrypted registered
[ 3.617376] RAS: Correctable Errors collector initialized.
[ 3.619518] Freeing unused decrypted memory: 2036K
[ 3.620488] Freeing unused kernel image (initmem) memory: 1852K
[ 3.631747] Write protecting the kernel read-only data: 22528k
[ 3.633734] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 3.635313] Freeing unused kernel image (rodata/data gap) memory: 1600K
[ 3.636403] rodata_test: all tests were successful
[ 3.637405] Run /init as init process
[ 3.638392] with arguments:
[ 3.638393] /init
[ 3.638394] with environment:
[ 3.638395] HOME=/
[ 3.638397] TERM=linux
[ 3.638398] BOOT_IMAGE=/boot/vmlinuz-generic
[ 3.656942] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.657616] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.658234] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.666456] udevd[272]: starting eudev-3.2.11
[ 3.957669] usbcore: registered new interface driver usb-storage
[ 3.961437] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.964475] ehci-pci: EHCI PCI platform driver
[ 3.965330] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.966103] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.966767] ehci-pci 0000:00:1a.0: debug port 2
[ 3.971284] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf4607000
[ 3.978736] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.979408] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 3.980029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.980634] usb usb1: Product: EHCI Host Controller
[ 3.981234] usb usb1: Manufacturer: Linux 5.15.63 ehci_hcd
[ 3.981836] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.982679] hub 1-0:1.0: USB hub found
[ 3.983332] hub 1-0:1.0: 2 ports detected
[ 3.984205] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.984757] udevd[305]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 0 09 vboxusers': No such file or directory
[ 3.985034] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.987024] ehci-pci 0000:00:1d.0: debug port 2
[ 3.991645] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4606000
[ 3.998734] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.999440] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 4.000115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.000795] usb usb2: Product: EHCI Host Controller
[ 4.001469] usb usb2: Manufacturer: Linux 5.15.63 ehci_hcd
[ 4.002150] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.003073] hub 2-0:1.0: USB hub found
[ 4.003788] hub 2-0:1.0: 2 ports detected
[ 4.005372] udevd[308]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 128 09 vboxusers': No such file or directory
[ 4.018739] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 4.019565] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
[ 4.020472] xhci_hcd 0000:09:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 4.021638] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 4.022508] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
[ 4.023265] xhci_hcd 0000:09:00.0: Host supports USB 3.0 SuperSpeed
[ 4.024029] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 4.024762] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.025484] usb usb3: Product: xHCI Host Controller
[ 4.026207] usb usb3: Manufacturer: Linux 5.15.63 xhci-hcd
[ 4.026897] usb usb3: SerialNumber: 0000:09:00.0
[ 4.027763] hub 3-0:1.0: USB hub found
[ 4.028444] hub 3-0:1.0: 2 ports detected
[ 4.029218] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.029903] udevd[311]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 256 09 vboxusers': No such file or directory
[ 4.031422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 4.032132] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.032837] usb usb4: Product: xHCI Host Controller
[ 4.033532] usb usb4: Manufacturer: Linux 5.15.63 xhci-hcd
[ 4.034235] usb usb4: SerialNumber: 0000:09:00.0
[ 4.035160] hub 4-0:1.0: USB hub found
[ 4.035874] hub 4-0:1.0: 2 ports detected
[ 4.036734] xhci_hcd 0000:0a:00.0: xHCI Host Controller
[ 4.037301] udevd[312]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 384 09 vboxusers': No such file or directory
[ 4.037528] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 5
[ 4.039640] xhci_hcd 0000:0a:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 4.040639] xhci_hcd 0000:0a:00.0: xHCI Host Controller
[ 4.041370] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 6
[ 4.042077] xhci_hcd 0000:0a:00.0: Host supports USB 3.0 SuperSpeed
[ 4.043111] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 4.043790] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.044463] usb usb5: Product: xHCI Host Controller
[ 4.045136] usb usb5: Manufacturer: Linux 5.15.63 xhci-hcd
[ 4.045812] usb usb5: SerialNumber: 0000:0a:00.0
[ 4.046645] hub 5-0:1.0: USB hub found
[ 4.047311] hub 5-0:1.0: 2 ports detected
[ 4.048037] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.048625] udevd[313]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 512 09 vboxusers': No such file or directory
[ 4.048696] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 4.050760] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.051435] usb usb6: Product: xHCI Host Controller
[ 4.052100] usb usb6: Manufacturer: Linux 5.15.63 xhci-hcd
[ 4.052759] usb usb6: SerialNumber: 0000:0a:00.0
[ 4.053567] hub 6-0:1.0: USB hub found
[ 4.054227] hub 6-0:1.0: 2 ports detected
[ 4.054997] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 4.055522] udevd[314]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 640 09 vboxusers': No such file or directory
[ 4.055704] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 7
[ 4.162474] xhci_hcd 0000:0b:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 4.163339] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 4.164071] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 8
[ 4.164721] xhci_hcd 0000:0b:00.0: Host supports USB 3.0 SuperSpeed
[ 4.165945] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 4.166540] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.167123] usb usb7: Product: xHCI Host Controller
[ 4.167703] usb usb7: Manufacturer: Linux 5.15.63 xhci-hcd
[ 4.168281] usb usb7: SerialNumber: 0000:0b:00.0
[ 4.169072] hub 7-0:1.0: USB hub found
[ 4.169661] hub 7-0:1.0: 2 ports detected
[ 4.170312] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.170834] udevd[315]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 768 09 vboxusers': No such file or directory
[ 4.170948] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 4.172836] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.173444] usb usb8: Product: xHCI Host Controller
[ 4.174038] usb usb8: Manufacturer: Linux 5.15.63 xhci-hcd
[ 4.174624] usb usb8: SerialNumber: 0000:0b:00.0
[ 4.175348] hub 8-0:1.0: USB hub found
[ 4.175950] hub 8-0:1.0: 2 ports detected
[ 4.177328] udevd[317]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 896 09 vboxusers': No such file or directory
[ 4.181112] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.184640] ohci-pci: OHCI PCI platform driver
[ 4.188609] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.193212] hid: raw HID events driver (C) Jiri Kosina
[ 4.198050] usbcore: registered new interface driver usbhid
[ 4.198873] usbhid: USB HID core driver
[ 4.225703] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.231128] asus_wmi: ASUS WMI generic driver loaded
[ 4.241704] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.354418] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 4.355412] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.356775] hub 1-1:1.0: USB hub found
[ 4.357927] hub 1-1:1.0: 6 ports detected
[ 4.361543] udevd[345]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 1 09 vboxusers': No such file or directory
[ 4.370419] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 4.371448] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.372827] hub 2-1:1.0: USB hub found
[ 4.374041] hub 2-1:1.0: 8 ports detected
[ 4.377941] udevd[346]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 129 09 vboxusers': No such file or directory
[ 4.498906] usb 8-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 4.631729] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 4.647737] usb 2-1.7: new high-speed USB device number 3 using ehci-pci
[ 4.728040] usb 2-1.7: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 2.76
[ 4.729088] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.730081] usb 2-1.7: Product: USB2.0 Hub
[ 4.731641] hub 2-1.7:1.0: USB hub found
[ 4.732913] hub 2-1.7:1.0: 4 ports detected
[ 4.742628] udevd[347]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 130 09 vboxusers': No such file or directory
[ 4.801529] usb 8-1: New USB device found, idVendor=2109, idProduct=0810, bcdDevice= 3.76
[ 4.802691] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.803808] usb 8-1: Product: 4-Port USB 3.0 Hub
[ 4.804927] usb 8-1: Manufacturer: VIA Labs, Inc.
[ 4.805724] usb 2-1.8: new high-speed USB device number 4 using ehci-pci
[ 4.809824] hub 8-1:1.0: USB hub found
[ 4.825300] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0161, bcdDevice=61.23
[ 4.826520] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.827674] usb 1-1.1: Product: USB2.0-CRW
[ 4.828821] usb 1-1.1: Manufacturer: Generic
[ 4.829967] usb 1-1.1: SerialNumber: 20070818000000000
[ 4.833845] usb-storage 1-1.1:1.1: USB Mass Storage device detected
[ 4.835694] scsi host16: usb-storage 1-1.1:1.1
[ 4.861776] hub 8-1:1.0: 4 ports detected
[ 4.898035] usb 2-1.8: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 2.76
[ 4.899265] usb 2-1.8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.900491] usb 2-1.8: Product: USB2.0 Hub
[ 4.901799] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 4.903363] hub 2-1.8:1.0: USB hub found
[ 4.904922] hub 2-1.8:1.0: 4 ports detected
[ 4.914664] udevd[353]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 131 09 vboxusers': No such file or directory
[ 4.984707] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0607, bcdDevice= 8.01
[ 4.986114] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.987471] usb 1-1.5: Product: USB2.0 Hub
[ 4.989656] hub 1-1.5:1.0: USB hub found
[ 4.991444] hub 1-1.5:1.0: 4 ports detected
[ 4.996653] udevd[354]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 3 09 vboxusers': No such file or directory
[ 5.001495] usb 8-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 5.015745] usb 2-1.7.3: new full-speed USB device number 5 using ehci-pci
[ 5.099495] usb 2-1.7.3: New USB device found, idVendor=046d, idProduct=c531, bcdDevice=21.00
[ 5.100809] usb 2-1.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.102105] usb 2-1.7.3: Product: USB Receiver
[ 5.103372] usb 2-1.7.3: Manufacturer: Logitech
[ 5.108256] logitech-djreceiver 0003:046D:C531.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.3/input0
[ 5.166568] logitech-djreceiver 0003:046D:C531.0002: hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.3/input1
[ 5.223194] logitech-djreceiver 0003:046D:C531.0002: device of type eQUAD step 4 Gaming (0x07) connected on slot 1
[ 5.227391] udevd[357]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 132 00 vboxusers': No such file or directory
[ 5.229372] input: Logitech G700s as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.1/0003:046D:C531.0002/0003:046D:102A.0003/input/input0
[ 5.233649] logitech-hidpp-device 0003:046D:102A.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech G700s] on usb-0000:00:1d.0-1.7.3/input1:1
[ 5.264732] usb 1-1.5.1: new low-speed USB device number 5 using ehci-pci
[ 5.304149] usb 8-2: New USB device found, idVendor=2109, idProduct=0810, bcdDevice= 3.76
[ 5.305479] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.306738] usb 8-2: Product: 4-Port USB 3.0 Hub
[ 5.307986] usb 8-2: Manufacturer: VIA Labs, Inc.
[ 5.312577] hub 8-2:1.0: USB hub found
[ 5.352164] usb 1-1.5.1: New USB device found, idVendor=046d, idProduct=c228, bcdDevice= 1.10
[ 5.353820] usb 1-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.355405] usb 1-1.5.1: Product: G19 Gaming Keyboard
[ 5.361439] input: G19 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/0003:046D:C228.0004/input/input1
[ 5.364358] hub 8-2:1.0: 4 ports detected
[ 5.387825] udevd[367]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 897 09 vboxusers': No such file or directory
[ 5.387947] udevd[368]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 898 09 vboxusers': No such file or directory
[ 5.417521] hid-generic 0003:046D:C228.0004: input,hidraw3: USB HID v1.10 Keyboard [G19 Gaming Keyboard] on usb-0000:00:1a.0-1.5.1/input0
[ 5.425232] input: G19 Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.1/0003:046D:C228.0005/input/input2
[ 5.481212] hid-generic 0003:046D:C228.0005: input,hiddev97,hidraw4: USB HID v1.10 Device [G19 Gaming Keyboard] on usb-0000:00:1a.0-1.5.1/input1
[ 5.549730] usb 1-1.5.2: new high-speed USB device number 6 using ehci-pci
[ 5.645539] usb 1-1.5.2: New USB device found, idVendor=046d, idProduct=c229, bcdDevice= 0.23
[ 5.647430] usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.649270] usb 1-1.5.2: Product: G19 Gaming Keyboard
[ 5.651088] usb 1-1.5.2: Manufacturer: Logitech
[ 5.671473] input: Logitech G19 Gaming Keyboard Keypad as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.1/0003:046D:C229.0006/input/input4
[ 5.727209] hid-generic 0003:046D:C229.0006: input,hiddev98,hidraw5: USB HID v1.11 Keypad [Logitech G19 Gaming Keyboard] on usb-0000:00:1a.0-1.5.2/input1
[ 5.734520] udevd[373]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 4 00 vboxusers': No such file or directory
[ 5.734660] udevd[374]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 2 00 vboxusers': No such file or directory
[ 5.734777] udevd[375]: failed to execute '/usr/share/virtualbox/VBoxCreateUSBNode.sh' '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 5 00 vboxusers': No such file or directory
[ 5.756762] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 5.855210] loop: module loaded
[ 5.888035] scsi 16:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 5.891123] sd 16:0:0:0: [sdb] Media removed, stopped polling
[ 5.906864] scsi 16:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 5.909029] sd 16:0:0:0: [sdb] Attached SCSI removable disk
[ 5.910224] sd 16:0:0:1: [sdc] Media removed, stopped polling
[ 5.925748] scsi 16:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 5.928027] sd 16:0:0:1: [sdc] Attached SCSI removable disk
[ 5.943538] scsi 16:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 5.944704] sd 16:0:0:2: [sdd] Media removed, stopped polling
[ 5.946476] sd 16:0:0:3: [sde] Media removed, stopped polling
[ 5.947849] sd 16:0:0:2: [sdd] Attached SCSI removable disk
[ 5.951340] sd 16:0:0:3: [sde] Attached SCSI removable disk
[ 6.075735] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.077276] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.078458] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.107498] udevd[774]: starting eudev-3.2.11
[ 6.134878] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.139727] ACPI: button: Power Button [PWRB]
[ 6.140966] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.148455] ACPI: button: Power Button [PWRF]
[ 6.216634] Linux agpgart interface v0.103
[ 6.221745] snd_ctxfi 0000:12:00.0: chip 20K2 model SB0880 (1102:0043) is found
[ 6.222885] snd_ctxfi 0000:12:00.0: enabling device (0000 -> 0002)
[ 6.226176] firewire_ohci 0000:17:00.0: enabling device (0000 -> 0003)
[ 6.228934] r8169 0000:0e:00.0 eth0: RTL8168e/8111e, 6c:62:6d:3e:e9:5d, XID 2c2, IRQ 71
[ 6.230127] r8169 0000:0e:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 6.234156] r8169 0000:0f:00.0 eth1: RTL8168e/8111e, 6c:62:6d:3e:e9:5c, XID 2c2, IRQ 72
[ 6.235295] r8169 0000:0f:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 6.262034] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 6.263068] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 6.265039] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 6.267400] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 6.267989] usbcore: registered new interface driver uas
[ 6.268140] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 6.268988] snd_hda_intel 0000:05:00.1: Disabling MSI
[ 6.270826] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
[ 6.271697] snd_hda_intel 0000:06:00.1: enabling device (0000 -> 0002)
[ 6.272510] snd_hda_intel 0000:06:00.1: Disabling MSI
[ 6.273357] snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
[ 6.276390] usbcore: registered new interface driver mceusb
[ 6.281747] firewire_ohci 0000:17:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
[ 6.319379] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:10.0/0000:06:00.1/sound/card3/input14
[ 6.320639] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:10.0/0000:06:00.1/sound/card3/input15
[ 6.320656] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 6.322707] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:10.0/0000:06:00.1/sound/card3/input16
[ 6.323366] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.325610] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card2/input8
[ 6.326126] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.329643] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:10.0/0000:06:00.1/sound/card3/input17
[ 6.332058] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card2/input9
[ 6.334898] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card2/input10
[ 6.335858] snd_hda_codec_realtek hdaudioC1D1: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.336701] udevd[784]: could not read from '/sys/module/pcc_cpufreq/initstate': No such device
[ 6.337099] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card2/input11
[ 6.337880] snd_hda_codec_realtek hdaudioC1D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.337883] snd_hda_codec_realtek hdaudioC1D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.338765] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card2/input12
[ 6.340404] snd_hda_codec_realtek hdaudioC1D1: mono: mono_out=0x0
[ 6.341420] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card2/input13
[ 6.342564] snd_hda_codec_realtek hdaudioC1D1: dig-out=0x11/0x1e
[ 6.342566] snd_hda_codec_realtek hdaudioC1D1: inputs:
[ 6.346330] gpio_ich gpio_ich.2.auto: GPIO from 948 to 1023
[ 6.347824] snd_hda_codec_realtek hdaudioC1D1: Front Mic=0x19
[ 6.351981] snd_hda_codec_realtek hdaudioC1D1: Rear Mic=0x18
[ 6.353209] snd_hda_codec_realtek hdaudioC1D1: Line=0x1a
[ 6.358939] at24 0-0051: supply vcc not found, using dummy regulator
[ 6.360424] at24 0-0051: 256 byte spd EEPROM, read-only
[ 6.361462] at24 0-0053: supply vcc not found, using dummy regulator
[ 6.362983] at24 0-0053: 256 byte spd EEPROM, read-only
[ 6.365855] nvidia: loading out-of-tree module taints kernel.
[ 6.365859] nvidia: loading out-of-tree module taints kernel.
[ 6.366871] nvidia: module license 'NVIDIA' taints kernel.
[ 6.367927] nvidia: module license 'NVIDIA' taints kernel.
[ 6.369212] Disabling lock debugging due to kernel taint
[ 6.374897] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 6.376447] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 6.377946] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 6.379558] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 6.381189] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[ 6.382640] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[ 6.384125] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[ 6.385566] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[ 6.421599] nvidia-nvlink: Nvlink Core is being initialized, major device number 510

[ 6.423233] nvidia 0000:05:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=nonewns=io+mem
[ 6.453369] intel_rapl_common: Found RAPL domain package
[ 6.454311] intel_rapl_common: Found RAPL domain core
[ 6.553181] snd_ctxfi 0000:12:00.0: Use xfi-native timer
[ 6.783941] firewire_core 0000:17:00.0: created device fw0: GUID 0010dc0001cdf02d, S400
[ 9.025814] nvidia 0000:06:00.0: enabling device (0000 -> 0003)
[ 11.626787] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 470.141.03 Thu Jun 30 18:45:31 UTC 2022

second part

[ 11.641639] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.141.03 Thu Jun 30 18:34:41 UTC 2022
[ 11.647366] [drm] [nvidia-drm] [GPU ID 0x00000500] Loading driver
[ 11.648590] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:05:00.0 on minor 0
[ 11.650317] [drm] [nvidia-drm] [GPU ID 0x00000600] Loading driver
[ 11.651693] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:06:00.0 on minor 1
[ 11.715455] Adding 1952764k swap on /dev/sda6. Priority:-2 extents:1 across:1952764k SSFS
[ 11.889812] EXT4-fs (sda7): re-mounted. Opts: (null). Quota mode: none.
[ 12.055228] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 12.098880] random: dd: uninitialized urandom read (32 bytes read)
[ 17.216074] NET: Registered PF_INET6 protocol family
[ 17.222222] Segment Routing with IPv6
[ 17.222226] RPL Segment Routing with IPv6
[ 17.222246] In-situ OAM (IOAM) with IPv6
[ 17.241387] random: udevadm: uninitialized urandom read (16 bytes read)
[ 17.241693] random: udevadm: uninitialized urandom read (16 bytes read)
[ 17.241704] random: udevadm: uninitialized urandom read (16 bytes read)
[ 18.212605] random: crng init done
[ 18.212608] random: 16 urandom warning(s) missed due to ratelimiting
[ 18.658915] RTL8211DN Gigabit Ethernet r8169-0-e00:00: attached PHY driver (mii_bushy_addr=r8169-0-e00:00, irq=MAC)
[ 18.914432] r8169 0000:0e:00.0 eth0: Link is Down
[ 18.918573] RTL8211DN Gigabit Ethernet r8169-0-f00:00: attached PHY driver (mii_bushy_addr=r8169-0-f00:00, irq=MAC)
[ 19.168375] r8169 0000:0f:00.0 eth1: Link is Down
[ 20.255485] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.360551] NFSD: Using UMH upcall client tracking operations.
[ 21.360557] NFSD: starting 90-second grace period (net f0000000)
[ 21.503767] r8169 0000:0f:00.0 eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 21.503783] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 21.531825] 8021q: 802.1Q VLAN Support v1.8
[ 21.556890] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 21.560526] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 22.917832] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 22.917838] caller _nv000720rm+0x1ad/0x200 [nvidia] mapping multiple BARs
[ 35.255966] fuse: init (API version 7.34)
[ 37.897048] logitech-hidpp-device 0003:046D:102A.0003: HID++ 1.0 device connected.


third and last part

The nvidia binary module's not part of Slackware install so.. not a Slackware problem?
That said. DNS should be up before NFS starts, but apparently this is not the case because "Link is Down" right before NFSD starts.