LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware > Slackware - ARM
User Name
Password
Slackware - ARM This forum is for the discussion of Slackware ARM.

Notices


Reply
  Search this Thread
Old 08-24-2021, 09:02 AM   #1
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Rep: Reputation: Disabled
Question Slarm64 on Pinebook Pro - black screen after kernel upgrade


Hello Everyone,

It's me again with my Pinebook Pro running Slarm64.
I wanted to upgrade the kernel on my machine, so I built a new installer image with images-build-kit, and took the kernel from there, and upgraded the relevant packages.

If my memories serve me well, I remember using the machine with the new (5.13.11) kernel, with GUI, X and everything.
But now, after a while of not using the machine, I wanted to upgrade some package, but when I turned it on, there was nothing displayed on the screen.
The screen itself seems to be in working condition, because when I tried to boot Manjaro from a micro-SD card, it turned on okay, and displayed everything it had to.

Apart form the screen being blank/black, I can access the machine via the serial console cable, and SSH too, so I got that going for me (which is nice).

I get the following output on the console during boot:
Code:
U-Boot 2020.10-rk3399 (Dec 10 2020 - 15:57:06 +0100)

SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 Pinebook Pro
DRAM:  3.9 GiB
PMIC:  RK808 
MMC:   mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Pine64 Pinebook Pro
Net:   No ethernet found.
starting USB...
Bus usb@fe380000: failed to get usb phy
Port not available.
Bus usb@fe3a0000: failed to get usb phy
Port not available.
Bus usb@fe3c0000: failed to get usb phy
Port not available.
Bus usb@fe3e0000: failed to get usb phy
Port not available.
Bus dwc3: Failed to get PHY0 for dwc3
Port not available.
Bus dwc3: Failed to get PHY0 for dwc3
Port not available.
Hit any key to stop autoboot:  0 
Card did not respond to voltage select!
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
1651 bytes read in 12 ms (133.8 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 0
96 bytes read in 9 ms (9.8 KiB/s)
81977 bytes read in 32 ms (2.4 MiB/s)
29071872 bytes read in 1272 ms (21.8 MiB/s)
12091406 bytes read in 538 ms (21.4 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=3e50000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    12091342 Bytes = 11.5 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f439e000, end f4f25fce ... OK
   Loading Device Tree to 00000000f4321000, end 00000000f439dfff ... OK

Starting kernel ...

[    2.524085] fusb302 4-0022: Unable to request IRQ for INT_N GPIO! 0
[    2.613351] mmc2: mmc_select_hs200 failed, error -110
[    2.613849] mmc2: error -110 whilst initialising MMC card
[    2.735790] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.736524] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.737228] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.737929] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.738628] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.739426] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.740158] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.740873] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.741572] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.742269] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.742968] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.743684] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.744387] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.745088] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.745790] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.746492] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.747225] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.747929] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    2.748629] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    7.102198] cw2015 4-0062: Failed to register power supply
[    7.111088] cw2015 4-0062: Failed to register power supply
[    7.120224] cw2015 4-0062: Failed to register power supply
[    7.127370] OF: graph: no port node found in /i2c@ff3d0000/fusb30x@22
[    7.181121] rockchip-dp ff970000.edp: no DP phy configured
[    7.183790] cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
[    7.186277] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    7.332881] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    7.346576] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3


Welcome to Linux 5.13.11 aarch64 (ttyS2)

janos-pbp login:
The kernel log buffer has the following:
Code:
[Tue Aug 24 15:30:17 2021] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[Tue Aug 24 15:30:17 2021] Linux version 5.13.11 (root@janos-pbp) (gcc (GCC) 10.3.0, GNU ld version 2.36.1-slack15) #1 SMP PREEMPT Mon Aug 16 13:15:06 CEST 2021
[Tue Aug 24 15:30:17 2021] Machine model: Pine64 Pinebook Pro
[Tue Aug 24 15:30:17 2021] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[Tue Aug 24 15:30:17 2021] printk: bootconsole [uart8250] enabled
[Tue Aug 24 15:30:17 2021] efi: UEFI not found.
[Tue Aug 24 15:30:17 2021] NUMA: No NUMA configuration found
[Tue Aug 24 15:30:17 2021] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[Tue Aug 24 15:30:17 2021] NUMA: NODE_DATA [mem 0xf77cd100-0xf77cefff]
[Tue Aug 24 15:30:17 2021] Zone ranges:
[Tue Aug 24 15:30:17 2021]   DMA      [mem 0x0000000000200000-0x00000000f7ffffff]
[Tue Aug 24 15:30:17 2021]   DMA32    empty
[Tue Aug 24 15:30:17 2021]   Normal   empty
[Tue Aug 24 15:30:17 2021] Movable zone start for each node
[Tue Aug 24 15:30:17 2021] Early memory node ranges
[Tue Aug 24 15:30:17 2021]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[Tue Aug 24 15:30:17 2021] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[Tue Aug 24 15:30:17 2021] On node 0 totalpages: 1015296
[Tue Aug 24 15:30:17 2021]   DMA zone: 15864 pages used for memmap
[Tue Aug 24 15:30:17 2021]   DMA zone: 0 pages reserved
[Tue Aug 24 15:30:17 2021]   DMA zone: 1015296 pages, LIFO batch:63
[Tue Aug 24 15:30:17 2021] cma: Reserved 128 MiB at 0x00000000e8400000
[Tue Aug 24 15:30:17 2021] psci: probing for conduit method from DT.
[Tue Aug 24 15:30:17 2021] psci: PSCIv1.1 detected in firmware.
[Tue Aug 24 15:30:17 2021] psci: Using standard PSCI v0.2 function IDs
[Tue Aug 24 15:30:17 2021] psci: MIGRATE_INFO_TYPE not supported.
[Tue Aug 24 15:30:17 2021] psci: SMC Calling Convention v1.2
[Tue Aug 24 15:30:17 2021] percpu: Embedded 33 pages/cpu s96216 r8192 d30760 u135168
[Tue Aug 24 15:30:17 2021] pcpu-alloc: s96216 r8192 d30760 u135168 alloc=33*4096
[Tue Aug 24 15:30:17 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[Tue Aug 24 15:30:17 2021] Detected VIPT I-cache on CPU0
[Tue Aug 24 15:30:17 2021] CPU features: detected: GIC system register CPU interface
[Tue Aug 24 15:30:17 2021] CPU features: detected: ARM erratum 845719
[Tue Aug 24 15:30:17 2021] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[Tue Aug 24 15:30:17 2021] Policy zone: DMA
[Tue Aug 24 15:30:17 2021] Kernel command line: root=/dev/mmcblk2p2 ro rootwait rootfstype=f2fs init=/sbin/init console=ttyS2,1500000n8 console=tty1 consoleblank=0 loglevel=4 usb-storage.quirks=  earlycon=uart8250,mmio32,0xff1a0000
[Tue Aug 24 15:30:17 2021] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[Tue Aug 24 15:30:17 2021] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[Tue Aug 24 15:30:17 2021] mem auto-init: stack:off, heap alloc:on, heap free:off
[Tue Aug 24 15:30:17 2021] Memory: 3810400K/4061184K available (15296K kernel code, 2662K rwdata, 6044K rodata, 4288K init, 582K bss, 119712K reserved, 131072K cma-reserved)
[Tue Aug 24 15:30:17 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[Tue Aug 24 15:30:17 2021] trace event string verifier disabled
[Tue Aug 24 15:30:17 2021] rcu: Preemptible hierarchical RCU implementation.
[Tue Aug 24 15:30:17 2021] rcu:         RCU event tracing is enabled.
[Tue Aug 24 15:30:17 2021] rcu:         RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[Tue Aug 24 15:30:17 2021]      Trampoline variant of Tasks RCU enabled.
[Tue Aug 24 15:30:17 2021]      Rude variant of Tasks RCU enabled.
[Tue Aug 24 15:30:17 2021]      Tracing variant of Tasks RCU enabled.
[Tue Aug 24 15:30:17 2021] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[Tue Aug 24 15:30:17 2021] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[Tue Aug 24 15:30:17 2021] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[Tue Aug 24 15:30:17 2021] GICv3: GIC: Using split EOI/Deactivate mode
[Tue Aug 24 15:30:17 2021] GICv3: 256 SPIs implemented
[Tue Aug 24 15:30:17 2021] GICv3: 0 Extended SPIs implemented
[Tue Aug 24 15:30:17 2021] GICv3: Distributor has no Range Selector support
[Tue Aug 24 15:30:17 2021] Root IRQ handler: gic_handle_irq
[Tue Aug 24 15:30:17 2021] GICv3: 16 PPIs implemented
[Tue Aug 24 15:30:17 2021] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[Tue Aug 24 15:30:17 2021] ITS [mem 0xfee20000-0xfee3ffff]
[Tue Aug 24 15:30:17 2021] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
[Tue Aug 24 15:30:17 2021] ITS: using cache flushing for cmd queue
[Tue Aug 24 15:30:17 2021] GICv3: using LPI property table @0x00000000004d0000
[Tue Aug 24 15:30:17 2021] GIC: using cache flushing for LPI property table
[Tue Aug 24 15:30:17 2021] GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000
[Tue Aug 24 15:30:17 2021] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[Tue Aug 24 15:30:17 2021] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[Tue Aug 24 15:30:17 2021] random: get_random_bytes called from start_kernel+0x6bc/0x8a4 with crng_init=0
[Tue Aug 24 15:30:17 2021] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[Tue Aug 24 15:30:17 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[Tue Aug 24 15:30:17 2021] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[Tue Aug 24 15:30:17 2021] Console: colour dummy device 80x25
[Tue Aug 24 15:30:17 2021] printk: console [tty1] enabled
[Tue Aug 24 15:30:17 2021] printk: bootconsole [uart8250] disabled
[Tue Aug 24 15:30:17 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[Tue Aug 24 15:30:17 2021] pid_max: default: 32768 minimum: 301
[Tue Aug 24 15:30:17 2021] LSM: Security Framework initializing
[Tue Aug 24 15:30:17 2021] Yama: becoming mindful.
[Tue Aug 24 15:30:17 2021] AppArmor: AppArmor initialized
[Tue Aug 24 15:30:17 2021] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[Tue Aug 24 15:30:17 2021] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[Tue Aug 24 15:30:17 2021] rcu: Hierarchical SRCU implementation.
[Tue Aug 24 15:30:17 2021] Platform MSI: interrupt-controller@fee20000 domain created
[Tue Aug 24 15:30:17 2021] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[Tue Aug 24 15:30:17 2021] EFI services will not be available.
[Tue Aug 24 15:30:17 2021] smp: Bringing up secondary CPUs ...
[Tue Aug 24 15:30:17 2021] Detected VIPT I-cache on CPU1
[Tue Aug 24 15:30:17 2021] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[Tue Aug 24 15:30:17 2021] GICv3: CPU1: using allocated LPI pending table @0x00000000004f0000
[Tue Aug 24 15:30:17 2021] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[Tue Aug 24 15:30:17 2021] Detected VIPT I-cache on CPU2
[Tue Aug 24 15:30:17 2021] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[Tue Aug 24 15:30:17 2021] GICv3: CPU2: using allocated LPI pending table @0x0000000000580000
[Tue Aug 24 15:30:17 2021] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[Tue Aug 24 15:30:17 2021] Detected VIPT I-cache on CPU3
[Tue Aug 24 15:30:17 2021] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[Tue Aug 24 15:30:17 2021] GICv3: CPU3: using allocated LPI pending table @0x0000000000590000
[Tue Aug 24 15:30:17 2021] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[Tue Aug 24 15:30:17 2021] CPU features: detected: Spectre-v2
[Tue Aug 24 15:30:17 2021] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[Tue Aug 24 15:30:17 2021] Detected PIPT I-cache on CPU4
[Tue Aug 24 15:30:17 2021] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[Tue Aug 24 15:30:17 2021] GICv3: CPU4: using allocated LPI pending table @0x00000000005a0000
[Tue Aug 24 15:30:17 2021] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[Tue Aug 24 15:30:17 2021] Detected PIPT I-cache on CPU5
[Tue Aug 24 15:30:17 2021] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[Tue Aug 24 15:30:17 2021] GICv3: CPU5: using allocated LPI pending table @0x00000000005b0000
[Tue Aug 24 15:30:17 2021] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[Tue Aug 24 15:30:17 2021] smp: Brought up 1 node, 6 CPUs
[Tue Aug 24 15:30:17 2021] SMP: Total of 6 processors activated.
[Tue Aug 24 15:30:17 2021] CPU features: detected: 32-bit EL0 Support
[Tue Aug 24 15:30:17 2021] CPU features: detected: 32-bit EL1 Support
[Tue Aug 24 15:30:17 2021] CPU features: detected: CRC32 instructions
[Tue Aug 24 15:30:17 2021] CPU: All CPU(s) started at EL2
[Tue Aug 24 15:30:17 2021] alternatives: patching kernel code
[Tue Aug 24 15:30:17 2021] devtmpfs: initialized
[Tue Aug 24 15:30:17 2021] Registered cp15_barrier emulation handler
[Tue Aug 24 15:30:17 2021] Registered setend emulation handler
[Tue Aug 24 15:30:17 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[Tue Aug 24 15:30:17 2021] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[Tue Aug 24 15:30:17 2021] pinctrl core: initialized pinctrl subsystem
[Tue Aug 24 15:30:17 2021] DMI not present or invalid.
[Tue Aug 24 15:30:17 2021] NET: Registered protocol family 16
[Tue Aug 24 15:30:17 2021] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[Tue Aug 24 15:30:17 2021] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[Tue Aug 24 15:30:17 2021] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[Tue Aug 24 15:30:17 2021] audit: initializing netlink subsys (disabled)
[Tue Aug 24 15:30:17 2021] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1
[Tue Aug 24 15:30:17 2021] thermal_sys: Registered thermal governor 'fair_share'
[Tue Aug 24 15:30:17 2021] thermal_sys: Registered thermal governor 'bang_bang'
[Tue Aug 24 15:30:17 2021] thermal_sys: Registered thermal governor 'step_wise'
[Tue Aug 24 15:30:17 2021] thermal_sys: Registered thermal governor 'user_space'
[Tue Aug 24 15:30:17 2021] cpuidle: using governor menu
[Tue Aug 24 15:30:17 2021] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[Tue Aug 24 15:30:17 2021] ASID allocator initialised with 65536 entries
[Tue Aug 24 15:30:17 2021] Serial: AMBA PL011 UART driver
[Tue Aug 24 15:30:17 2021] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc
[Tue Aug 24 15:30:17 2021] platform ff8f0000.vop: Fixing up cyclic dependency with fec00000.dp
[Tue Aug 24 15:30:17 2021] platform ff900000.vop: Fixing up cyclic dependency with fec00000.dp
[Tue Aug 24 15:30:17 2021] platform ff970000.edp: Fixing up cyclic dependency with ff8f0000.vop
[Tue Aug 24 15:30:17 2021] platform ff970000.edp: Fixing up cyclic dependency with ff900000.vop
[Tue Aug 24 15:30:17 2021] platform edp-panel: Fixing up cyclic dependency with ff970000.edp
[Tue Aug 24 15:30:17 2021] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[Tue Aug 24 15:30:17 2021] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[Tue Aug 24 15:30:17 2021] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[Tue Aug 24 15:30:17 2021] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[Tue Aug 24 15:30:17 2021] cryptd: max_cpu_qlen set to 1000
[Tue Aug 24 15:30:17 2021] raid6: neonx8   gen()  1653 MB/s
[Tue Aug 24 15:30:17 2021] raid6: neonx8   xor()  1218 MB/s
[Tue Aug 24 15:30:17 2021] raid6: neonx4   gen()  1635 MB/s
[Tue Aug 24 15:30:17 2021] raid6: neonx4   xor()  1245 MB/s
[Tue Aug 24 15:30:17 2021] raid6: neonx2   gen()  1509 MB/s
[Tue Aug 24 15:30:17 2021] raid6: neonx2   xor()  1160 MB/s
[Tue Aug 24 15:30:17 2021] raid6: neonx1   gen()  1159 MB/s
[Tue Aug 24 15:30:17 2021] raid6: neonx1   xor()   926 MB/s
[Tue Aug 24 15:30:17 2021] raid6: int64x8  gen()   933 MB/s
[Tue Aug 24 15:30:17 2021] raid6: int64x8  xor()   566 MB/s
[Tue Aug 24 15:30:17 2021] raid6: int64x4  gen()  1005 MB/s
[Tue Aug 24 15:30:17 2021] raid6: int64x4  xor()   573 MB/s
[Tue Aug 24 15:30:18 2021] raid6: int64x2  gen()   950 MB/s
[Tue Aug 24 15:30:18 2021] raid6: int64x2  xor()   520 MB/s
[Tue Aug 24 15:30:18 2021] raid6: int64x1  gen()   723 MB/s
[Tue Aug 24 15:30:18 2021] raid6: int64x1  xor()   383 MB/s
[Tue Aug 24 15:30:18 2021] raid6: using algorithm neonx8 gen() 1653 MB/s
[Tue Aug 24 15:30:18 2021] raid6: .... xor() 1218 MB/s, rmw enabled
[Tue Aug 24 15:30:18 2021] raid6: using neon recovery algorithm
[Tue Aug 24 15:30:18 2021] vcc_12v: supplied by vcc_sysin
[Tue Aug 24 15:30:18 2021] vcc3v3_sys: supplied by vcc_sysin
[Tue Aug 24 15:30:18 2021] vcc5v0_usb: supplied by vcc_sysin
[Tue Aug 24 15:30:18 2021] vcc_0v9: supplied by vcc3v3_sys
[Tue Aug 24 15:30:18 2021] vcca1v8_s3: supplied by vcc3v3_sys
[Tue Aug 24 15:30:18 2021] vcc3v0_sd: supplied by vcc3v3_sys
[Tue Aug 24 15:30:18 2021] vcc3v3_panel: supplied by vcc3v3_sys
[Tue Aug 24 15:30:18 2021] vcc3v3_ssd: supplied by vcc3v3_sys
[Tue Aug 24 15:30:18 2021] vcc5v0_otg: supplied by vcc5v0_usb
[Tue Aug 24 15:30:18 2021] vbus_5vout: supplied by vcc5v0_usb
[Tue Aug 24 15:30:18 2021] iommu: Default domain type: Translated 
[Tue Aug 24 15:30:18 2021] vgaarb: loaded
[Tue Aug 24 15:30:18 2021] SCSI subsystem initialized
[Tue Aug 24 15:30:18 2021] libata version 3.00 loaded.
[Tue Aug 24 15:30:18 2021] usbcore: registered new interface driver usbfs
[Tue Aug 24 15:30:18 2021] usbcore: registered new interface driver hub
[Tue Aug 24 15:30:18 2021] usbcore: registered new device driver usb
[Tue Aug 24 15:30:18 2021] pps_core: LinuxPPS API ver. 1 registered
[Tue Aug 24 15:30:18 2021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[Tue Aug 24 15:30:18 2021] PTP clock support registered
[Tue Aug 24 15:30:18 2021] EDAC MC: Ver: 3.0.0
[Tue Aug 24 15:30:18 2021] NetLabel: Initializing
[Tue Aug 24 15:30:18 2021] NetLabel:  domain hash size = 128
[Tue Aug 24 15:30:18 2021] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[Tue Aug 24 15:30:18 2021] NetLabel:  unlabeled traffic allowed by default
[Tue Aug 24 15:30:18 2021] clocksource: Switched to clocksource arch_sys_counter
[Tue Aug 24 15:30:18 2021] VFS: Disk quotas dquot_6.6.0
[Tue Aug 24 15:30:18 2021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Tue Aug 24 15:30:18 2021] AppArmor: AppArmor Filesystem Enabled
[Tue Aug 24 15:30:18 2021] NET: Registered protocol family 2
[Tue Aug 24 15:30:18 2021] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[Tue Aug 24 15:30:18 2021] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[Tue Aug 24 15:30:18 2021] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[Tue Aug 24 15:30:18 2021] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[Tue Aug 24 15:30:18 2021] TCP: Hash tables configured (established 32768 bind 32768)
[Tue Aug 24 15:30:18 2021] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[Tue Aug 24 15:30:18 2021] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[Tue Aug 24 15:30:18 2021] NET: Registered protocol family 1
[Tue Aug 24 15:30:18 2021] NET: Registered protocol family 44
[Tue Aug 24 15:30:18 2021] PCI: CLS 0 bytes, default 64
[Tue Aug 24 15:30:18 2021] Trying to unpack rootfs image as initramfs...
[Tue Aug 24 15:30:18 2021] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[Tue Aug 24 15:30:18 2021] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[Tue Aug 24 15:30:18 2021] kvm [1]: IPA Size Limit: 40 bits
[Tue Aug 24 15:30:18 2021] kvm [1]: vgic-v2@fff20000
[Tue Aug 24 15:30:18 2021] kvm [1]: GIC system register CPU interface enabled
[Tue Aug 24 15:30:18 2021] kvm [1]: vgic interrupt IRQ18
[Tue Aug 24 15:30:18 2021] kvm [1]: Hyp mode initialized successfully
[Tue Aug 24 15:30:18 2021] Initialise system trusted keyrings
[Tue Aug 24 15:30:18 2021] Key type blacklist registered
[Tue Aug 24 15:30:18 2021] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[Tue Aug 24 15:30:18 2021] zbud: loaded
[Tue Aug 24 15:30:18 2021] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[Tue Aug 24 15:30:18 2021] fuse: init (API version 7.34)
[Tue Aug 24 15:30:18 2021] integrity: Platform Keyring initialized
[Tue Aug 24 15:30:18 2021] xor: measuring software checksum speed
[Tue Aug 24 15:30:18 2021]    8regs           :  2538 MB/sec
[Tue Aug 24 15:30:18 2021]    32regs          :  2915 MB/sec
[Tue Aug 24 15:30:18 2021]    arm64_neon      :  2281 MB/sec
[Tue Aug 24 15:30:18 2021] xor: using function: 32regs (2915 MB/sec)
[Tue Aug 24 15:30:18 2021] Key type asymmetric registered
[Tue Aug 24 15:30:18 2021] Asymmetric key parser 'x509' registered
[Tue Aug 24 15:30:18 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[Tue Aug 24 15:30:18 2021] io scheduler mq-deadline registered
[Tue Aug 24 15:30:18 2021] io scheduler kyber registered
[Tue Aug 24 15:30:18 2021] io scheduler bfq registered
[Tue Aug 24 15:30:18 2021] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[Tue Aug 24 15:30:18 2021] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[Tue Aug 24 15:30:18 2021] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[Tue Aug 24 15:30:18 2021] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[Tue Aug 24 15:30:18 2021] vdd_log: supplied by regulator-dummy
[Tue Aug 24 15:30:18 2021] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[Tue Aug 24 15:30:18 2021] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 42, base_baud = 1500000) is a 16550A
[Tue Aug 24 15:30:18 2021] serial serial0: tty port ttyS0 registered
[Tue Aug 24 15:30:18 2021] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 43, base_baud = 1500000) is a 16550A
[Tue Aug 24 15:30:18 2021] printk: console [ttyS2] enabled
 
Old 08-24-2021, 09:03 AM   #2
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Original Poster
Rep: Reputation: Disabled
The kernel log continued:

Code:
[Tue Aug 24 15:30:18 2021] Serial: AMBA driver
[Tue Aug 24 15:30:18 2021] cacheinfo: Unable to detect cache hierarchy for CPU 0
[Tue Aug 24 15:30:18 2021] loop: module loaded
[Tue Aug 24 15:30:18 2021] spi-nor spi0.0: gd25q128 (16384 Kbytes)
[Tue Aug 24 15:30:19 2021] Freeing initrd memory: 11804K
[Tue Aug 24 15:30:19 2021] libphy: Fixed MDIO Bus: probed
[Tue Aug 24 15:30:19 2021] tun: Universal TUN/TAP device driver, 1.6
[Tue Aug 24 15:30:19 2021] thunder_xcv, ver 1.0
[Tue Aug 24 15:30:19 2021] thunder_bgx, ver 1.0
[Tue Aug 24 15:30:19 2021] nicpf, ver 1.0
[Tue Aug 24 15:30:19 2021] e1000e: Intel(R) PRO/1000 Network Driver
[Tue Aug 24 15:30:19 2021] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[Tue Aug 24 15:30:19 2021] igb: Intel(R) Gigabit Ethernet Network Driver
[Tue Aug 24 15:30:19 2021] igb: Copyright (c) 2007-2014 Intel Corporation.
[Tue Aug 24 15:30:19 2021] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[Tue Aug 24 15:30:19 2021] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[Tue Aug 24 15:30:19 2021] sky2: driver version 1.30
[Tue Aug 24 15:30:19 2021] VFIO - User Level meta-driver version: 0.3
[Tue Aug 24 15:30:19 2021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Tue Aug 24 15:30:19 2021] ehci-pci: EHCI PCI platform driver
[Tue Aug 24 15:30:19 2021] ehci-platform: EHCI generic platform driver
[Tue Aug 24 15:30:19 2021] ehci-platform fe3c0000.usb: EHCI Host Controller
[Tue Aug 24 15:30:19 2021] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[Tue Aug 24 15:30:19 2021] ehci-platform fe3c0000.usb: irq 36, io mem 0xfe3c0000
[Tue Aug 24 15:30:19 2021] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[Tue Aug 24 15:30:19 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[Tue Aug 24 15:30:19 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:19 2021] usb usb1: Product: EHCI Host Controller
[Tue Aug 24 15:30:19 2021] usb usb1: Manufacturer: Linux 5.13.11 ehci_hcd
[Tue Aug 24 15:30:19 2021] usb usb1: SerialNumber: fe3c0000.usb
[Tue Aug 24 15:30:19 2021] hub 1-0:1.0: USB hub found
[Tue Aug 24 15:30:19 2021] hub 1-0:1.0: 1 port detected
[Tue Aug 24 15:30:19 2021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[Tue Aug 24 15:30:19 2021] ohci-pci: OHCI PCI platform driver
[Tue Aug 24 15:30:19 2021] ohci-platform: OHCI generic platform driver
[Tue Aug 24 15:30:19 2021] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[Tue Aug 24 15:30:19 2021] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[Tue Aug 24 15:30:19 2021] ohci-platform fe3e0000.usb: irq 37, io mem 0xfe3e0000
[Tue Aug 24 15:30:19 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[Tue Aug 24 15:30:19 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:19 2021] usb usb2: Product: Generic Platform OHCI controller
[Tue Aug 24 15:30:19 2021] usb usb2: Manufacturer: Linux 5.13.11 ohci_hcd
[Tue Aug 24 15:30:19 2021] usb usb2: SerialNumber: fe3e0000.usb
[Tue Aug 24 15:30:19 2021] hub 2-0:1.0: USB hub found
[Tue Aug 24 15:30:19 2021] hub 2-0:1.0: 1 port detected
[Tue Aug 24 15:30:19 2021] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[Tue Aug 24 15:30:19 2021] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[Tue Aug 24 15:30:19 2021] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010
[Tue Aug 24 15:30:19 2021] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0xfe900000
[Tue Aug 24 15:30:19 2021] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[Tue Aug 24 15:30:19 2021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:19 2021] usb usb3: Product: xHCI Host Controller
[Tue Aug 24 15:30:19 2021] usb usb3: Manufacturer: Linux 5.13.11 xhci-hcd
[Tue Aug 24 15:30:19 2021] usb usb3: SerialNumber: xhci-hcd.0.auto
[Tue Aug 24 15:30:19 2021] hub 3-0:1.0: USB hub found
[Tue Aug 24 15:30:19 2021] hub 3-0:1.0: 1 port detected
[Tue Aug 24 15:30:19 2021] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[Tue Aug 24 15:30:19 2021] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[Tue Aug 24 15:30:19 2021] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[Tue Aug 24 15:30:19 2021] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[Tue Aug 24 15:30:19 2021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[Tue Aug 24 15:30:19 2021] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:19 2021] usb usb4: Product: xHCI Host Controller
[Tue Aug 24 15:30:19 2021] usb usb4: Manufacturer: Linux 5.13.11 xhci-hcd
[Tue Aug 24 15:30:19 2021] usb usb4: SerialNumber: xhci-hcd.0.auto
[Tue Aug 24 15:30:19 2021] hub 4-0:1.0: USB hub found
[Tue Aug 24 15:30:19 2021] hub 4-0:1.0: 1 port detected
[Tue Aug 24 15:30:19 2021] usbcore: registered new interface driver usb-storage
[Tue Aug 24 15:30:19 2021] mousedev: PS/2 mouse device common for all mice
[Tue Aug 24 15:30:19 2021] i2c /dev entries driver
[Tue Aug 24 15:30:19 2021] rk808 0-001b: chip id: 0x0
[Tue Aug 24 15:30:19 2021] rk808-regulator rk808-regulator: there is no dvs0 gpio
[Tue Aug 24 15:30:19 2021] rk808-regulator rk808-regulator: there is no dvs1 gpio
[Tue Aug 24 15:30:19 2021] vdd_center: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vdd_cpu_l: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcc_ddr: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcc_1v8: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] LDO_REG1: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] LDO_REG2: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcc1v8_pmupll: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcc_sdio: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcca3v0_codec: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcc_1v5: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcca1v8_codec: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcc_3v0: supplied by vcc_sysin
[Tue Aug 24 15:30:19 2021] vcc3v3_s3: supplied by vcc3v3_sys
[Tue Aug 24 15:30:19 2021] vcc3v3_s0: supplied by vcc3v3_sys
[Tue Aug 24 15:30:19 2021] rk808-rtc rk808-rtc: registered as rtc0
[Tue Aug 24 15:30:19 2021] rk808-rtc rk808-rtc: setting system clock to 2021-08-24T15:30:20 UTC (1629819020)
[Tue Aug 24 15:30:19 2021] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[Tue Aug 24 15:30:19 2021] vdd_cpu_b: supplied by vcc_1v8
[Tue Aug 24 15:30:19 2021] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[Tue Aug 24 15:30:19 2021] random: fast init done
[Tue Aug 24 15:30:19 2021] vdd_gpu: supplied by vcc_1v8
[Tue Aug 24 15:30:19 2021] dw_wdt ff848000.watchdog: No valid TOPs array specified
[Tue Aug 24 15:30:19 2021] sdhci: Secure Digital Host Controller Interface driver
[Tue Aug 24 15:30:19 2021] sdhci: Copyright(c) Pierre Ossman
[Tue Aug 24 15:30:19 2021] Synopsys Designware Multimedia Card Interface Driver
[Tue Aug 24 15:30:19 2021] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[Tue Aug 24 15:30:19 2021] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[Tue Aug 24 15:30:19 2021] mmc_host mmc0: card is non-removable.
[Tue Aug 24 15:30:19 2021] mmc2: CQHCI version 5.10
[Tue Aug 24 15:30:19 2021] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Aug 24 15:30:19 2021] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[Tue Aug 24 15:30:19 2021] hid: raw HID events driver (C) Jiri Kosina
[Tue Aug 24 15:30:19 2021] usbcore: registered new interface driver usbhid
[Tue Aug 24 15:30:19 2021] usbhid: USB HID core driver
[Tue Aug 24 15:30:19 2021] fusb302 4-0022: Can't get property of role, set role to default DRP
[Tue Aug 24 15:30:19 2021] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[Tue Aug 24 15:30:19 2021] fusb302 4-0022: Unable to request IRQ for INT_N GPIO! 0
[Tue Aug 24 15:30:19 2021] fusb302: probe of 4-0022 failed with error -22
[Tue Aug 24 15:30:19 2021] drop_monitor: Initializing network drop monitor service
[Tue Aug 24 15:30:19 2021] NET: Registered protocol family 10
[Tue Aug 24 15:30:19 2021] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[Tue Aug 24 15:30:19 2021] Segment Routing with IPv6
[Tue Aug 24 15:30:19 2021] NET: Registered protocol family 17
[Tue Aug 24 15:30:19 2021] 8021q: 802.1Q VLAN Support v1.8
[Tue Aug 24 15:30:19 2021] Key type dns_resolver registered
[Tue Aug 24 15:30:19 2021] registered taskstats version 1
[Tue Aug 24 15:30:19 2021] Loading compiled-in X.509 certificates
[Tue Aug 24 15:30:19 2021] Loaded X.509 cert 'Build time autogenerated kernel key: e9c46452e91ed961e3950e44fd2702115a3eacdf'
[Tue Aug 24 15:30:19 2021] zswap: loaded using pool lzo/zbud
[Tue Aug 24 15:30:19 2021] Key type ._fscrypt registered
[Tue Aug 24 15:30:19 2021] Key type .fscrypt registered
[Tue Aug 24 15:30:19 2021] Key type fscrypt-provisioning registered
[Tue Aug 24 15:30:19 2021] Btrfs loaded, crc32c=crc32c-generic, zoned=yes
[Tue Aug 24 15:30:19 2021] Key type encrypted registered
[Tue Aug 24 15:30:19 2021] AppArmor: AppArmor sha1 policy hashing enabled
[Tue Aug 24 15:30:19 2021] mmc2: mmc_select_hs200 failed, error -110
[Tue Aug 24 15:30:19 2021] mmc2: error -110 whilst initialising MMC card
[Tue Aug 24 15:30:19 2021] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[Tue Aug 24 15:30:19 2021] usb 1-1: new high-speed USB device number 2 using ehci-platform
[Tue Aug 24 15:30:19 2021] vcc0v9_s3: supplied by vcc_1v8
[Tue Aug 24 15:30:19 2021] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[Tue Aug 24 15:30:19 2021] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[Tue Aug 24 15:30:19 2021] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[Tue Aug 24 15:30:19 2021] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[Tue Aug 24 15:30:19 2021] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Aug 24 15:30:19 2021] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Aug 24 15:30:19 2021] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Aug 24 15:30:19 2021] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Aug 24 15:30:19 2021] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[Tue Aug 24 15:30:19 2021] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[Tue Aug 24 15:30:19 2021] pci_bus 0000:00: root bus resource [bus 00-1f]
[Tue Aug 24 15:30:19 2021] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[Tue Aug 24 15:30:19 2021] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[Tue Aug 24 15:30:19 2021] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[Tue Aug 24 15:30:19 2021] pci 0000:00:00.0: supports D1
[Tue Aug 24 15:30:19 2021] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[Tue Aug 24 15:30:19 2021] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[Tue Aug 24 15:30:19 2021] pci 0000:01:00.0: [15b7:5009] type 00 class 0x010802
[Tue Aug 24 15:30:19 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[Tue Aug 24 15:30:19 2021] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit]
[Tue Aug 24 15:30:19 2021] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
[Tue Aug 24 15:30:19 2021] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[Tue Aug 24 15:30:19 2021] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[Tue Aug 24 15:30:19 2021] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[Tue Aug 24 15:30:19 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64bit]
[Tue Aug 24 15:30:19 2021] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa004000-0xfa0040ff 64bit]
[Tue Aug 24 15:30:19 2021] pci 0000:00:00.0: PCI bridge to [bus 01]
[Tue Aug 24 15:30:19 2021] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[Tue Aug 24 15:30:19 2021] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[Tue Aug 24 15:30:19 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 89
[Tue Aug 24 15:30:19 2021] pcieport 0000:00:00.0: AER: enabled with IRQ 89
[Tue Aug 24 15:30:19 2021] nvme nvme0: pci function 0000:01:00.0
[Tue Aug 24 15:30:19 2021] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] mmc2: Command Queue Engine enabled
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] mmc2: new HS200 MMC card at address 0001
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] mmcblk2: mmc2:0001 DA4064 58.2 GiB 
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] mmcblk2boot0: mmc2:0001 DA4064 4.00 MiB 
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] mmcblk2boot1: mmc2:0001 DA4064 4.00 MiB 
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] mmcblk2rpmb: mmc2:0001 DA4064 16.0 MiB, chardev (242:0)
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021]  mmcblk2: p1 p2
[Tue Aug 24 15:30:19 2021] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[Tue Aug 24 15:30:19 2021] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[Tue Aug 24 15:30:19 2021] input: gpio-key-lid as /devices/platform/gpio-key-lid/input/input0
[Tue Aug 24 15:30:19 2021] input: gpio-key-power as /devices/platform/gpio-key-power/input/input1
[Tue Aug 24 15:30:19 2021] nvme nvme0: allocated 32 MiB host memory buffer.
[Tue Aug 24 15:30:19 2021] nvme nvme0: 6/0/0 default/read/poll queues
[Tue Aug 24 15:30:19 2021]  nvme0n1: p1
[Tue Aug 24 15:30:19 2021] Freeing unused kernel memory: 4288K
[Tue Aug 24 15:30:19 2021] Run /init as init process
[Tue Aug 24 15:30:19 2021]   with arguments:
[Tue Aug 24 15:30:19 2021]     /init
[Tue Aug 24 15:30:19 2021]   with environment:
[Tue Aug 24 15:30:19 2021]     HOME=/
[Tue Aug 24 15:30:19 2021]     TERM=linux
[Tue Aug 24 15:30:19 2021] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[Tue Aug 24 15:30:19 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Tue Aug 24 15:30:19 2021] usb 1-1: Product: USB2.0 Hub
[Tue Aug 24 15:30:19 2021] hub 1-1:1.0: USB hub found
[Tue Aug 24 15:30:19 2021] hub 1-1:1.0: 4 ports detected
[Tue Aug 24 15:30:19 2021] random: udevd: uninitialized urandom read (16 bytes read)
[Tue Aug 24 15:30:19 2021] random: udevd: uninitialized urandom read (16 bytes read)
[Tue Aug 24 15:30:19 2021] random: udevd: uninitialized urandom read (16 bytes read)
[Tue Aug 24 15:30:19 2021] udevd[277]: starting eudev-3.2.9
[Tue Aug 24 15:30:20 2021] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
[Tue Aug 24 15:30:20 2021] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[Tue Aug 24 15:30:20 2021] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[Tue Aug 24 15:30:20 2021] usb 1-1.2: Product: USB Camera
[Tue Aug 24 15:30:20 2021] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
[Tue Aug 24 15:30:20 2021] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 52
[Tue Aug 24 15:30:20 2021] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[Tue Aug 24 15:30:22 2021] F2FS-fs (mmcblk2p2): recover fsync data on readonly fs
[Tue Aug 24 15:30:22 2021] F2FS-fs (mmcblk2p2): Mounted with checkpoint version = 361c3d02
[Tue Aug 24 15:30:23 2021] udevd[590]: starting eudev-3.2.10
[Tue Aug 24 15:30:24 2021] Bluetooth: Core ver 2.22
[Tue Aug 24 15:30:24 2021] NET: Registered protocol family 31
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI device and connection manager initialized
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI socket layer initialized
[Tue Aug 24 15:30:24 2021] Bluetooth: L2CAP socket layer initialized
[Tue Aug 24 15:30:24 2021] Bluetooth: SCO socket layer initialized
[Tue Aug 24 15:30:24 2021] cw2015 4-0062: Failed to register power supply
[Tue Aug 24 15:30:24 2021] es8316 1-0011: Failed to get IRQ 0: -22
[Tue Aug 24 15:30:24 2021] mc: Linux media interface: v0.10
[Tue Aug 24 15:30:24 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[Tue Aug 24 15:30:24 2021] cw2015 4-0062: Failed to register power supply
[Tue Aug 24 15:30:24 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[Tue Aug 24 15:30:24 2021] cw2015 4-0062: Failed to register power supply
[Tue Aug 24 15:30:24 2021] OF: graph: no port node found in /i2c@ff3d0000/fusb30x@22
[Tue Aug 24 15:30:24 2021] videodev: Linux video capture interface: v2.00
[Tue Aug 24 15:30:24 2021] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[Tue Aug 24 15:30:24 2021] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5
[Tue Aug 24 15:30:24 2021] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010
[Tue Aug 24 15:30:24 2021] xhci-hcd xhci-hcd.2.auto: irq 74, io mem 0xfe800000
[Tue Aug 24 15:30:24 2021] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[Tue Aug 24 15:30:24 2021] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:24 2021] usb usb5: Product: xHCI Host Controller
[Tue Aug 24 15:30:24 2021] usb usb5: Manufacturer: Linux 5.13.11 xhci-hcd
[Tue Aug 24 15:30:24 2021] usb usb5: SerialNumber: xhci-hcd.2.auto
[Tue Aug 24 15:30:24 2021] hub 5-0:1.0: USB hub found
[Tue Aug 24 15:30:24 2021] hub 5-0:1.0: 1 port detected
[Tue Aug 24 15:30:24 2021] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[Tue Aug 24 15:30:24 2021] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[Tue Aug 24 15:30:24 2021] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[Tue Aug 24 15:30:24 2021] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[Tue Aug 24 15:30:24 2021] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[Tue Aug 24 15:30:24 2021] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:24 2021] usb usb6: Product: xHCI Host Controller
[Tue Aug 24 15:30:24 2021] usb usb6: Manufacturer: Linux 5.13.11 xhci-hcd
[Tue Aug 24 15:30:24 2021] usb usb6: SerialNumber: xhci-hcd.2.auto
[Tue Aug 24 15:30:24 2021] hub 6-0:1.0: USB hub found
[Tue Aug 24 15:30:24 2021] hub 6-0:1.0: 1 port detected
[Tue Aug 24 15:30:24 2021] ehci-platform fe380000.usb: EHCI Host Controller
[Tue Aug 24 15:30:24 2021] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 7
[Tue Aug 24 15:30:24 2021] ehci-platform fe380000.usb: irq 34, io mem 0xfe380000
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART driver ver 2.3
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol H4 registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol BCSP registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol LL registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol ATH3K registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol Intel registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol Broadcom registered
[Tue Aug 24 15:30:24 2021] Driver 'hci_uart_qca' needs updating - please use bus_type methods
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol QCA registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol AG6XX registered
[Tue Aug 24 15:30:24 2021] Bluetooth: HCI UART protocol Marvell registered
[Tue Aug 24 15:30:24 2021] brcmfmac: F1 signature read @0x18000000=0x15294345
[Tue Aug 24 15:30:24 2021] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[Tue Aug 24 15:30:24 2021] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[Tue Aug 24 15:30:24 2021] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:24 2021] usb usb7: Product: EHCI Host Controller
[Tue Aug 24 15:30:24 2021] usb usb7: Manufacturer: Linux 5.13.11 ehci_hcd
[Tue Aug 24 15:30:24 2021] usb usb7: SerialNumber: fe380000.usb
[Tue Aug 24 15:30:24 2021] hub 7-0:1.0: USB hub found
[Tue Aug 24 15:30:24 2021] hub 7-0:1.0: 1 port detected
[Tue Aug 24 15:30:24 2021] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[Tue Aug 24 15:30:24 2021] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 8
[Tue Aug 24 15:30:24 2021] ohci-platform fe3a0000.usb: irq 35, io mem 0xfe3a0000
[Tue Aug 24 15:30:24 2021] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[Tue Aug 24 15:30:24 2021] rockchip-vop ff900000.vop: Adding to iommu group 3
[Tue Aug 24 15:30:24 2021] rockchip-dp ff970000.edp: no DP phy configured
[Tue Aug 24 15:30:24 2021] cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
[Tue Aug 24 15:30:24 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[Tue Aug 24 15:30:24 2021] cdn-dp: probe of fec00000.dp failed with error -22
[Tue Aug 24 15:30:24 2021] usbcore: registered new interface driver brcmfmac
[Tue Aug 24 15:30:24 2021] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Aug 24 15:30:24 2021] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Aug 24 15:30:24 2021] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[Tue Aug 24 15:30:24 2021] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Aug 24 15:30:24 2021] usb usb8: Product: Generic Platform OHCI controller
[Tue Aug 24 15:30:24 2021] usb usb8: Manufacturer: Linux 5.13.11 ohci_hcd
[Tue Aug 24 15:30:24 2021] usb usb8: SerialNumber: fe3a0000.usb
[Tue Aug 24 15:30:24 2021] hub 8-0:1.0: USB hub found
[Tue Aug 24 15:30:24 2021] hub 8-0:1.0: 1 port detected
[Tue Aug 24 15:30:24 2021] rkvdec ff660000.video-codec: Adding to iommu group 1
[Tue Aug 24 15:30:24 2021] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[Tue Aug 24 15:30:24 2021] panfrost ff9a0000.gpu: clock rate = 500000000
[Tue Aug 24 15:30:24 2021] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video0
[Tue Aug 24 15:30:24 2021] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video2
[Tue Aug 24 15:30:24 2021] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[Tue Aug 24 15:30:24 2021] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[Tue Aug 24 15:30:24 2021] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[Tue Aug 24 15:30:24 2021] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[Tue Aug 24 15:30:24 2021] rockchip-rga ff680000.rga: HW Version: 0x03.02
[Tue Aug 24 15:30:24 2021] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video3
[Tue Aug 24 15:30:24 2021] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[Tue Aug 24 15:30:24 2021] usb 1-1.2: Found UVC 1.00 device USB Camera (0c45:6321)
[Tue Aug 24 15:30:24 2021] dw-apb-uart ff180000.serial: failed to request DMA
[Tue Aug 24 15:30:24 2021] input: USB Camera: USB Camera as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
[Tue Aug 24 15:30:24 2021] usbcore: registered new interface driver uvcvideo
[Tue Aug 24 15:30:24 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[Tue Aug 24 15:30:24 2021] input: rockchip,es8316-codec Headphones as /devices/platform/es8316-sound/sound/card0/input2
[Tue Aug 24 15:30:24 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3
[Tue Aug 24 15:30:24 2021] random: crng init done
[Tue Aug 24 15:30:24 2021] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Aug 24 15:30:24 2021] Bluetooth: hci0: BCM: chip id 130
[Tue Aug 24 15:30:24 2021] Bluetooth: hci0: BCM: features 0x0f
[Tue Aug 24 15:30:24 2021] Bluetooth: hci0: BCM4345C5
[Tue Aug 24 15:30:24 2021] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[Tue Aug 24 15:30:24 2021] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
 
Old 08-24-2021, 09:04 AM   #3
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Original Poster
Rep: Reputation: Disabled
Still continued:

Code:
[Tue Aug 24 15:30:24 2021] usb 8-1: new low-speed USB device number 2 using ohci-platform
[Tue Aug 24 15:30:24 2021] usb 8-1: New USB device found, idVendor=258a, idProduct=001e, bcdDevice= 1.00
[Tue Aug 24 15:30:24 2021] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Tue Aug 24 15:30:24 2021] usb 8-1: Product: USB KEYBOARD
[Tue Aug 24 15:30:24 2021] usb 8-1: Manufacturer: HAILUCK CO.,LTD
[Tue Aug 24 15:30:24 2021] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.0/0003:258A:001E.0001/input/input4
[Tue Aug 24 15:30:25 2021] hid-generic 0003:258A:001E.0001: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input5
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input6
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input7
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input8
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input9
[Tue Aug 24 15:30:25 2021] hid-generic 0003:258A:001E.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[Tue Aug 24 15:30:25 2021] Bluetooth: hci0: BCM4345C5 Ampak_CL1.5 UART 37.4 MHz BT 5.0 [Version: Version: 0033.0080]
[Tue Aug 24 15:30:25 2021] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0080
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input10
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input11
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input12
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input13
[Tue Aug 24 15:30:25 2021] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb8/8-1/8-1:1.1/0003:258A:001E.0002/input/input14
[Tue Aug 24 15:30:25 2021] hid-multitouch 0003:258A:001E.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[Tue Aug 24 15:30:26 2021] zram: Added device: zram0
[Tue Aug 24 15:30:26 2021] zram0: detected capacity change from 0 to 2097152
[Tue Aug 24 15:30:26 2021] EXT4-fs (mmcblk2p1): mounted filesystem with writeback data mode. Opts: data=writeback,errors=remount-ro. Quota mode: none.
[Tue Aug 24 15:30:26 2021] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[Tue Aug 24 15:30:26 2021] F2FS-fs (nvme0n1p1): Mounted with checkpoint version = 714c4c5c
[Tue Aug 24 15:30:26 2021] F2FS-fs (mmcblk2p2): Swapfile (2) is not align to section: 
                                1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate()
[Tue Aug 24 15:30:26 2021] Adding 2097148k swap on /swapfile.  Priority:0 extents:2 across:268k SSFS
[Tue Aug 24 15:30:28 2021] zram: Cannot change disksize for initialized device
[Tue Aug 24 15:30:29 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Aug 24 15:30:29 2021] Bluetooth: BNEP filters: protocol multicast
[Tue Aug 24 15:30:29 2021] Bluetooth: BNEP socket layer initialized
[Tue Aug 24 15:30:29 2021] NET: Registered protocol family 38
[Tue Aug 24 15:30:30 2021] ieee80211 phy0: brcmf_netdev_set_mac_address: Setting cur_etheraddr failed, -52
[Tue Aug 24 15:30:31 2021] zram0: detected capacity change from 2097152 to 0
[Tue Aug 24 15:30:31 2021] zram: Removed device: zram0
[Tue Aug 24 15:30:31 2021] udevd[833]: error opening ATTR{/sys/devices/virtual/block/zram0/disksize} for writing: No such file or directory
[Tue Aug 24 15:30:31 2021] zram: Added device: zram0
[Tue Aug 24 15:30:31 2021] zram0: detected capacity change from 0 to 2097152
[Tue Aug 24 15:30:31 2021] rockchip-i2s ff890000.i2s: Fail to set mclk -22
[Tue Aug 24 15:30:31 2021] rockchip-i2s ff890000.i2s: ASoC: error at snd_soc_dai_set_sysclk on ff890000.i2s: -22
[Tue Aug 24 15:30:31 2021] rockchip-i2s ff890000.i2s: Fail to set mclk -22
[Tue Aug 24 15:30:31 2021] rockchip-i2s ff890000.i2s: ASoC: error at snd_soc_dai_set_sysclk on ff890000.i2s: -22
[Tue Aug 24 15:30:31 2021] rockchip-i2s ff890000.i2s: Fail to set mclk -22
[Tue Aug 24 15:30:31 2021] rockchip-i2s ff890000.i2s: ASoC: error at snd_soc_dai_set_sysclk on ff890000.i2s: -22
[Tue Aug 24 15:30:32 2021] zram0: detected capacity change from 2097152 to 0
[Tue Aug 24 15:30:32 2021] zram0: detected capacity change from 0 to 4194304
[Tue Aug 24 15:30:32 2021] Adding 2097148k swap on /dev/zram0.  Priority:10 extents:1 across:2097148k SSFS
[Tue Aug 24 15:30:32 2021] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[Tue Aug 24 15:30:36 2021] rockchip-i2s ff890000.i2s: Fail to set mclk -22
[Tue Aug 24 15:30:36 2021] rockchip-i2s ff890000.i2s: ASoC: error at snd_soc_dai_set_sysclk on ff890000.i2s: -22
[Tue Aug 24 15:30:36 2021] rockchip-i2s ff890000.i2s: Fail to set mclk -22
[Tue Aug 24 15:30:36 2021] rockchip-i2s ff890000.i2s: ASoC: error at snd_soc_dai_set_sysclk on ff890000.i2s: -22
[Tue Aug 24 15:30:36 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[Tue Aug 24 15:30:50 2021] vbus_5vout: disabling
And finally, Xorg.0.log contains the following:
Code:
[   995.214] 
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[   995.214] Build Operating System: Slackware 15.0 Slackware Linux Project
[   995.214] Current Operating System: Linux janos-pbp 5.13.11 #1 SMP PREEMPT Mon Aug 16 13:15:06 CEST 2021 aarch64
[   995.214] Kernel command line: root=/dev/mmcblk2p2 ro rootwait rootfstype=f2fs init=/sbin/init console=ttyS2,1500000n8 console=tty1 consoleblank=0 loglevel=4 usb-storage.quirks=  earlycon=uart8250,mmio32,0xff1a0000
[   995.214] Build Date: 30 July 2021  08:16:48PM
[   995.214]  
[   995.214] Current version of pixman: 0.40.0
[   995.214]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   995.214] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   995.215] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 24 15:46:53 2021
[   995.215] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   995.215] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   995.216] (==) No Layout section.  Using the first Screen section.
[   995.216] (==) No screen section available. Using defaults.
[   995.216] (**) |-->Screen "Default Screen Section" (0)
[   995.216] (**) |   |-->Monitor "<default monitor>"
[   995.216] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   995.216] (==) Automatically adding devices
[   995.216] (==) Automatically enabling devices
[   995.217] (==) Automatically adding GPU devices
[   995.217] (==) Automatically binding GPU devices
[   995.217] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   995.217] (WW) The directory "/usr/share/fonts/local" does not exist.
[   995.217]    Entry deleted from font path.
[   995.217] (WW) The directory "/usr/share/fonts/CID" does not exist.
[   995.217]    Entry deleted from font path.
[   995.217] (==) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF,
        /usr/share/fonts/OTF,
        /usr/share/fonts/Type1,
        /usr/share/fonts/75dpi/:unscaled,
        /usr/share/fonts/100dpi/:unscaled,
        /usr/share/fonts/75dpi,
        /usr/share/fonts/100dpi,
        /usr/share/fonts/cyrillic
[   995.217] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   995.217] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   995.217] (II) Loader magic: 0x624c30
[   995.217] (II) Module ABI versions:
[   995.217]    X.Org ANSI C Emulation: 0.4
[   995.217]    X.Org Video Driver: 24.1
[   995.217]    X.Org XInput driver : 24.1
[   995.217]    X.Org Server Extension : 10.0
[   995.218] (II) xfree86: Adding drm device (/dev/dri/card0)
[   995.219] (II) no primary bus or device found
[   995.219]    falling back to /sys/devices/platform/ff9a0000.gpu/drm/card0
[   995.219] (II) LoadModule: "glx"
[   995.219] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   995.226] (II) Module glx: vendor="X.Org Foundation"
[   995.226]    compiled for 1.20.13, module version = 1.0.0
[   995.226]    ABI class: X.Org Server Extension, version 10.0
[   995.226] (==) Matched modesetting as autoconfigured driver 0
[   995.226] (==) Matched fbdev as autoconfigured driver 1
[   995.226] (==) Assigned the driver to the xf86ConfigLayout
[   995.226] (II) LoadModule: "modesetting"
[   995.227] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[   995.229] (II) Module modesetting: vendor="X.Org Foundation"
[   995.230]    compiled for 1.20.13, module version = 1.20.13
[   995.230]    Module class: X.Org Video Driver
[   995.230]    ABI class: X.Org Video Driver, version 24.1
[   995.230] (II) LoadModule: "fbdev"
[   995.231] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[   995.231] (II) Module fbdev: vendor="X.Org Foundation"
[   995.231]    compiled for 1.20.9, module version = 0.5.0
[   995.231]    Module class: X.Org Video Driver
[   995.231]    ABI class: X.Org Video Driver, version 24.1
[   995.231] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   995.231] (II) FBDEV: driver for framebuffer: fbdev
[   995.231] (--) using VT number 7

[   995.232] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[   995.232] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[   995.232] (WW) Falling back to old probe method for modesetting
[   995.232] (WW) Falling back to old probe method for fbdev
[   995.232] (II) Loading sub module "fbdevhw"
[   995.233] (II) LoadModule: "fbdevhw"
[   995.233] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[   995.233] (II) Module fbdevhw: vendor="X.Org Foundation"
[   995.233]    compiled for 1.20.13, module version = 0.0.2
[   995.233]    ABI class: X.Org Video Driver, version 24.1
[   995.233] (EE) open /dev/fb0: No such file or directory
[   995.233] (WW) Falling back to old probe method for modesetting
[   995.233] (WW) Falling back to old probe method for fbdev
[   995.233] (II) Loading sub module "fbdevhw"
[   995.233] (II) LoadModule: "fbdevhw"
[   995.233] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[   995.233] (II) Module fbdevhw: vendor="X.Org Foundation"
[   995.233]    compiled for 1.20.13, module version = 0.0.2
[   995.233]    ABI class: X.Org Video Driver, version 24.1
[   995.233] (EE) open /dev/fb0: No such file or directory
[   995.233] (EE) No devices detected.
[   995.233] (EE) 
Fatal server error:
[   995.233] (EE) no screens found(EE) 
[   995.233] (EE) 
Please consult the The X.Org Foundation support 
         at http://wiki.x.org
 for help. 
[   995.233] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   995.234] (EE) 
[   995.234] (EE) Server terminated with error (1). Closing log file.
 
Old 08-24-2021, 10:08 AM   #4
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Original Poster
Rep: Reputation: Disabled
All I can think of is that maybe upgrading to a new kernel version may have broken something around how the display is used.
To verify this I tried downgrading to kernel version 5.12.2, and after the downgrade, the display worked again.
 
Old 08-24-2021, 12:48 PM   #5
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,919

Rep: Reputation: Disabled
perhaps this is this problem, since this error is present in the log.
i added this patch.
 
1 members found this post helpful.
Old 08-25-2021, 06:54 AM   #6
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by sndwvs View Post
perhaps this is this problem, since this error is present in the log.
i added this patch.
I built a new installation image, and scavenged the kernel packages that were generated.
The display and GUI now work fine. Thank you!
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] Slarm64 on the Pinebook 1080 - help with kernel? shelldweller Slackware - ARM 229 12-07-2021 09:00 AM
[SOLVED] battery gauge broken on Pinebook Pro with Slarm64 wowbaggerHU Slackware - ARM 15 08-06-2021 02:22 PM
Video : New PINE64 Products. PineBook Pro, PinePhone, PineCam, PineH64 NicoD SBC Linux - Embedded & Single-board computer 2 02-06-2019 04:37 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware > Slackware - ARM

All times are GMT -5. The time now is 02:43 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration