LinuxQuestions.org
Help answer threads with 0 replies.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware > Slackware - ARM
Reload this Page [SOLVED] Raspberry Pi 4 bcm2711 (aarch64)
User Name
Password
Slackware - ARM This forum is for the discussion of Slackware ARM.

Notices


Reply
Page 5 of 7 « First 34 5 67
  Search this Thread
Old 12-03-2021, 09:07 AM   #61
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,430

Rep: Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339

@Exega: Thanks for the reply. I did as you suggested, but it didn't help. I gather from the page you linked that the canonical names are /dev/sdX, etc and the uuids are links to them.

@sndwvs: Thanks for the reply. It's good to know about root's password, but I have yet to get as far as logging in.

Mine is the standard Razpi 4B, w/ 4G of ram. I tried to get a handle on this problem with mobile phone photos, but one handed phone photos are full of camera shake.I'm missing the clear output from / being moved from /mnt to /. After adding some overscan, I can see that it doesn't like my filesystem. I get "could be anything" error (code page, dirty bit set, superblock or other error) and then announces that root is a read only file system. root is ext4. It runs /sbin/init, gets past updating gtk modules, to the next thing (QT?) and then switches to runlevel 6, and resets.

Got any ideas? It's not a filesystem fault. Usb disk & sdcard together? I checked the usb disk anyhow, and it's fine.
Last edited by business_kid; 12-03-2021 at 11:26 AM.
 
Old 12-05-2021, 07:17 AM   #62
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,430

Rep: Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339Reputation: 2339
Well, the way this fell out was that after examining the init scripts, it's pretty clear that / is mounted before /sbin/init is run. As /sbin/init is not included in the initrd, the mount of the / partition must be done read-only. I get a 'could be anything' type of error message, mentioning code page, superblock,… or other error. So booting fails. The kernel may work for others. It fails here.

I'm on the bog standard Pi 4B w/4G of ram and one firmware update for usb booting. I realise I'm talking to devs who have a developed instinct for issues, experience of possible problems and energy to solve them. I have none of those, poor health and dodgy balance. So I have wiped the promising looking slarm64 and grabbed the Slackware Arm 32bit. I'm fine with 32 a bit OS because 32bit is not significantly slower in my use case.
 
Old 12-07-2021, 09:17 AM   #63
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,918

Original Poster
Rep: Reputation: Disabled
discussion here
 
1 members found this post helpful.
Old 12-10-2021, 03:48 PM   #64
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Rep: Reputation: Disabled
Hi sndwvs,

I have a PoE hat on top of one of my Pi4s. After I recently upgraded my slarm64 installation, (just after the reboot) the fan of the PoE hat seems to have stopped spinning.
I went from kernel 5.12.something to 5.15.5. The fan was working fine before that.

I don't see any fan or pwm related messages in dmesg.
Do you have any idea what I should check?
 
Old 12-10-2021, 04:07 PM   #65
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,918

Original Poster
Rep: Reputation: Disabled
Hi wowbaggerHU,

let's see the dmesg output, also the lsmod output.
and
Code:
grep poe /boot/config.txt
Last edited by sndwvs; 12-10-2021 at 04:08 PM.
 
Old 12-11-2021, 02:24 AM   #66
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Rep: Reputation: Disabled
Quote:
Originally Posted by sndwvs View Post
let's see the dmesg output, also the lsmod output.
and
Code:
grep poe /boot/config.txt
Hi sndwvs,

dmesg:
Code:
[Fri Dec 10 22:27:46 2021] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[Fri Dec 10 22:27:46 2021] Linux version 5.15.5 (root@slarm64-dev) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT Sun Nov 28 19:37:16 UTC 2021
[Fri Dec 10 22:27:46 2021] Machine model: Raspberry Pi 4 Model B Rev 1.1
[Fri Dec 10 22:27:46 2021] efi: UEFI not found.
[Fri Dec 10 22:27:46 2021] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
[Fri Dec 10 22:27:46 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[Fri Dec 10 22:27:46 2021] Zone ranges:
[Fri Dec 10 22:27:46 2021]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[Fri Dec 10 22:27:46 2021]   DMA32    [mem 0x0000000040000000-0x000000007fffffff]
[Fri Dec 10 22:27:46 2021]   Normal   empty
[Fri Dec 10 22:27:46 2021] Movable zone start for each node
[Fri Dec 10 22:27:46 2021] Early memory node ranges
[Fri Dec 10 22:27:46 2021]   node   0: [mem 0x0000000000000000-0x000000003dffffff]
[Fri Dec 10 22:27:46 2021]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
[Fri Dec 10 22:27:46 2021] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[Fri Dec 10 22:27:46 2021] percpu: Embedded 28 pages/cpu s77080 r8192 d29416 u114688
[Fri Dec 10 22:27:46 2021] pcpu-alloc: s77080 r8192 d29416 u114688 alloc=28*4096
[Fri Dec 10 22:27:46 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Fri Dec 10 22:27:46 2021] Detected PIPT I-cache on CPU0
[Fri Dec 10 22:27:46 2021] CPU features: detected: Spectre-v2
[Fri Dec 10 22:27:46 2021] CPU features: detected: Spectre-v4
[Fri Dec 10 22:27:46 2021] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[Fri Dec 10 22:27:46 2021] Built 1 zonelists, mobility grouping on.  Total pages: 507904
[Fri Dec 10 22:27:46 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1200M@60 smsc95xx.macaddr=DC:A6:32:0C:9C:40 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 ro rootwait nofont console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 elevator=noop snd-bcm2835.enable_compat_alsa=0
[Fri Dec 10 22:27:46 2021] Kernel parameter elevator= does not have any effect anymore.
                           Please use sysfs to set IO scheduler for individual devices.
[Fri Dec 10 22:27:46 2021] Unknown kernel command line parameters "nofont selinux=0", will be passed to user space.
[Fri Dec 10 22:27:46 2021] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[Fri Dec 10 22:27:46 2021] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[Fri Dec 10 22:27:46 2021] mem auto-init: stack:off, heap alloc:off, heap free:off
[Fri Dec 10 22:27:46 2021] software IO TLB: mapped [mem 0x000000003a000000-0x000000003e000000] (64MB)
[Fri Dec 10 22:27:46 2021] Memory: 1672804K/2064384K available (11648K kernel code, 1924K rwdata, 4036K rodata, 3712K init, 945K bss, 129436K reserved, 262144K cma-reserved)
[Fri Dec 10 22:27:46 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
...
[Fri Dec 10 22:27:46 2021] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[Fri Dec 10 22:27:46 2021] Root IRQ handler: gic_handle_irq
[Fri Dec 10 22:27:46 2021] GIC: Using split EOI/Deactivate mode
[Fri Dec 10 22:27:46 2021] random: get_random_bytes called from start_kernel+0x510/0x700 with crng_init=0
[Fri Dec 10 22:27:46 2021] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[Fri Dec 10 22:27:46 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[Fri Dec 10 22:27:46 2021] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[Fri Dec 10 22:27:46 2021] Console: colour dummy device 80x25
[Fri Dec 10 22:27:46 2021] printk: console [tty1] enabled
[Fri Dec 10 22:27:46 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[Fri Dec 10 22:27:46 2021] pid_max: default: 32768 minimum: 301
[Fri Dec 10 22:27:46 2021] LSM: Security Framework initializing
[Fri Dec 10 22:27:46 2021] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[Fri Dec 10 22:27:46 2021] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[Fri Dec 10 22:27:46 2021] cgroup: Disabling memory control group subsystem
[Fri Dec 10 22:27:46 2021] rcu: Hierarchical SRCU implementation.
[Fri Dec 10 22:27:46 2021] EFI services will not be available.
[Fri Dec 10 22:27:46 2021] smp: Bringing up secondary CPUs ...
[Fri Dec 10 22:27:46 2021] Detected PIPT I-cache on CPU1
[Fri Dec 10 22:27:46 2021] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[Fri Dec 10 22:27:46 2021] Detected PIPT I-cache on CPU2
[Fri Dec 10 22:27:46 2021] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[Fri Dec 10 22:27:46 2021] Detected PIPT I-cache on CPU3
[Fri Dec 10 22:27:46 2021] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[Fri Dec 10 22:27:46 2021] smp: Brought up 1 node, 4 CPUs
[Fri Dec 10 22:27:46 2021] SMP: Total of 4 processors activated.
[Fri Dec 10 22:27:46 2021] CPU features: detected: 32-bit EL0 Support
[Fri Dec 10 22:27:46 2021] CPU features: detected: 32-bit EL1 Support
[Fri Dec 10 22:27:46 2021] CPU features: detected: CRC32 instructions
[Fri Dec 10 22:27:46 2021] CPU: All CPU(s) started at EL2
[Fri Dec 10 22:27:46 2021] alternatives: patching kernel code
[Fri Dec 10 22:27:46 2021] devtmpfs: initialized
[Fri Dec 10 22:27:46 2021] Enabled cp15_barrier support
[Fri Dec 10 22:27:46 2021] Enabled setend support
[Fri Dec 10 22:27:46 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[Fri Dec 10 22:27:46 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[Fri Dec 10 22:27:46 2021] pinctrl core: initialized pinctrl subsystem
...
[Fri Dec 10 22:27:46 2021] audit: initializing netlink subsys (disabled)
[Fri Dec 10 22:27:46 2021] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[Fri Dec 10 22:27:46 2021] thermal_sys: Registered thermal governor 'step_wise'
[Fri Dec 10 22:27:46 2021] cpuidle: using governor menu
[Fri Dec 10 22:27:46 2021] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[Fri Dec 10 22:27:46 2021] ASID allocator initialised with 65536 entries
[Fri Dec 10 22:27:46 2021] Serial: AMBA PL011 UART driver
[Fri Dec 10 22:27:46 2021] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[Fri Dec 10 22:27:46 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-12T15:52:31, variant start
[Fri Dec 10 22:27:46 2021] raspberrypi-firmware soc:firmware: Firmware hash is 0227a0840ee8c94294cf3b2c4b2d42031a58f05a
[Fri Dec 10 22:27:46 2021] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[Fri Dec 10 22:27:46 2021] vgaarb: loaded
[Fri Dec 10 22:27:46 2021] SCSI subsystem initialized
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver usbfs
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver hub
[Fri Dec 10 22:27:46 2021] usbcore: registered new device driver usb
[Fri Dec 10 22:27:46 2021] usb_phy_generic phy: supply vcc not found, using dummy regulator
[Fri Dec 10 22:27:46 2021] clocksource: Switched to clocksource arch_sys_counter
[Fri Dec 10 22:27:46 2021] VFS: Disk quotas dquot_6.6.0
[Fri Dec 10 22:27:46 2021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Fri Dec 10 22:27:46 2021] FS-Cache: Loaded
[Fri Dec 10 22:27:46 2021] CacheFiles: Loaded
[Fri Dec 10 22:27:46 2021] simple-framebuffer 3e330000.framebuffer: framebuffer at 0x3e330000, 0x8ca000 bytes
[Fri Dec 10 22:27:46 2021] simple-framebuffer 3e330000.framebuffer: format=a8r8g8b8, mode=1920x1200x32, linelength=7680
[Fri Dec 10 22:27:46 2021] Console: switching to colour frame buffer device 240x75
[Fri Dec 10 22:27:46 2021] simple-framebuffer 3e330000.framebuffer: fb0: simplefb registered!
...
[Fri Dec 10 22:27:46 2021] PCI: CLS 0 bytes, default 64
[Fri Dec 10 22:27:46 2021] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[Fri Dec 10 22:27:46 2021] kvm [1]: IPA Size Limit: 44 bits
[Fri Dec 10 22:27:46 2021] kvm [1]: vgic interrupt IRQ9
[Fri Dec 10 22:27:46 2021] kvm [1]: Hyp mode initialized successfully
[Fri Dec 10 22:27:46 2021] Initialise system trusted keyrings
[Fri Dec 10 22:27:46 2021] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[Fri Dec 10 22:27:46 2021] zbud: loaded
[Fri Dec 10 22:27:46 2021] FS-Cache: Netfs 'nfs' registered for caching
[Fri Dec 10 22:27:46 2021] NFS: Registering the id_resolver key type
[Fri Dec 10 22:27:46 2021] Key type id_resolver registered
[Fri Dec 10 22:27:46 2021] Key type id_legacy registered
[Fri Dec 10 22:27:46 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Fri Dec 10 22:27:46 2021] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[Fri Dec 10 22:27:46 2021] ntfs3: Max link count 4000
[Fri Dec 10 22:27:46 2021] ntfs3: Enabled Linux POSIX ACLs support
[Fri Dec 10 22:27:46 2021] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this
[Fri Dec 10 22:27:46 2021] Key type asymmetric registered
[Fri Dec 10 22:27:46 2021] Asymmetric key parser 'x509' registered
[Fri Dec 10 22:27:46 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[Fri Dec 10 22:27:46 2021] io scheduler mq-deadline registered
[Fri Dec 10 22:27:46 2021] io scheduler kyber registered
[Fri Dec 10 22:27:46 2021] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[Fri Dec 10 22:27:46 2021] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[Fri Dec 10 22:27:46 2021] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[Fri Dec 10 22:27:46 2021] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[Fri Dec 10 22:27:46 2021] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[Fri Dec 10 22:27:46 2021] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[Fri Dec 10 22:27:46 2021] pci_bus 0000:00: root bus resource [bus 00-ff]
[Fri Dec 10 22:27:46 2021] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[Fri Dec 10 22:27:46 2021] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[Fri Dec 10 22:27:46 2021] pci 0000:00:00.0: PME# supported from D0 D3hot
[Fri Dec 10 22:27:46 2021] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[Fri Dec 10 22:27:46 2021] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[Fri Dec 10 22:27:46 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[Fri Dec 10 22:27:46 2021] pci 0000:01:00.0: PME# supported from D0 D3cold
[Fri Dec 10 22:27:46 2021] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[Fri Dec 10 22:27:46 2021] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[Fri Dec 10 22:27:46 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[Fri Dec 10 22:27:46 2021] pci 0000:00:00.0: PCI bridge to [bus 01]
[Fri Dec 10 22:27:46 2021] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[Fri Dec 10 22:27:46 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[Fri Dec 10 22:27:46 2021] iproc-rng200 fe104000.rng: hwrng registered
[Fri Dec 10 22:27:46 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Fri Dec 10 22:27:46 2021] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[Fri Dec 10 22:27:46 2021] cacheinfo: Unable to detect cache hierarchy for CPU 0
[Fri Dec 10 22:27:46 2021] brd: module loaded
[Fri Dec 10 22:27:46 2021] loop: module loaded
[Fri Dec 10 22:27:46 2021] Loading iSCSI transport class v2.0-870.
[Fri Dec 10 22:27:46 2021] libphy: Fixed MDIO Bus: probed
[Fri Dec 10 22:27:46 2021] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[Fri Dec 10 22:27:46 2021] libphy: bcmgenet MII bus: probed
[Fri Dec 10 22:27:46 2021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver r8152
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver lan78xx
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver smsc95xx
[Fri Dec 10 22:27:46 2021] pci 0000:00:00.0: enabling device (0000 -> 0002)
[Fri Dec 10 22:27:46 2021] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[Fri Dec 10 22:27:46 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller
[Fri Dec 10 22:27:46 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[Fri Dec 10 22:27:46 2021] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[Fri Dec 10 22:27:46 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[Fri Dec 10 22:27:46 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Fri Dec 10 22:27:46 2021] usb usb1: Product: xHCI Host Controller
[Fri Dec 10 22:27:46 2021] usb usb1: Manufacturer: Linux 5.15.5 xhci-hcd
[Fri Dec 10 22:27:46 2021] usb usb1: SerialNumber: 0000:01:00.0
[Fri Dec 10 22:27:46 2021] hub 1-0:1.0: USB hub found
[Fri Dec 10 22:27:46 2021] hub 1-0:1.0: 1 port detected
[Fri Dec 10 22:27:46 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller
[Fri Dec 10 22:27:46 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[Fri Dec 10 22:27:46 2021] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[Fri Dec 10 22:27:46 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[Fri Dec 10 22:27:46 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Fri Dec 10 22:27:46 2021] usb usb2: Product: xHCI Host Controller
[Fri Dec 10 22:27:46 2021] usb usb2: Manufacturer: Linux 5.15.5 xhci-hcd
[Fri Dec 10 22:27:46 2021] usb usb2: SerialNumber: 0000:01:00.0
[Fri Dec 10 22:27:46 2021] hub 2-0:1.0: USB hub found
[Fri Dec 10 22:27:46 2021] hub 2-0:1.0: 4 ports detected
[Fri Dec 10 22:27:46 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Fri Dec 10 22:27:46 2021] dwc_otg: FIQ enabled
[Fri Dec 10 22:27:46 2021] dwc_otg: NAK holdoff enabled
[Fri Dec 10 22:27:46 2021] dwc_otg: FIQ split-transaction FSM enabled
[Fri Dec 10 22:27:46 2021] Module dwc_common_port init
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver uas
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver usb-storage
[Fri Dec 10 22:27:46 2021] mousedev: PS/2 mouse device common for all mice
[Fri Dec 10 22:27:46 2021] sdhci: Secure Digital Host Controller Interface driver
[Fri Dec 10 22:27:46 2021] sdhci: Copyright(c) Pierre Ossman
[Fri Dec 10 22:27:46 2021] sdhci-pltfm: SDHCI platform and OF driver helper
[Fri Dec 10 22:27:46 2021] ledtrig-cpu: registered to indicate activity on CPUs
[Fri Dec 10 22:27:46 2021] hid: raw HID events driver (C) Jiri Kosina
[Fri Dec 10 22:27:46 2021] usbcore: registered new interface driver usbhid
[Fri Dec 10 22:27:46 2021] usbhid: USB HID core driver
[Fri Dec 10 22:27:46 2021] Initializing XFRM netlink socket
[Fri Dec 10 22:27:46 2021] NET: Registered PF_PACKET protocol family
[Fri Dec 10 22:27:46 2021] Key type dns_resolver registered
[Fri Dec 10 22:27:46 2021] registered taskstats version 1
[Fri Dec 10 22:27:46 2021] Loading compiled-in X.509 certificates
[Fri Dec 10 22:27:46 2021] Key type ._fscrypt registered
[Fri Dec 10 22:27:46 2021] Key type .fscrypt registered
[Fri Dec 10 22:27:46 2021] Key type fscrypt-provisioning registered
[Fri Dec 10 22:27:46 2021] uart-pl011 fe201000.serial: there is not valid maps for state default
[Fri Dec 10 22:27:46 2021] uart-pl011 fe201000.serial: cts_event_workaround enabled
[Fri Dec 10 22:27:46 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
[Fri Dec 10 22:27:46 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[Fri Dec 10 22:27:46 2021] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 23, base_baud = 62500000) is a 16550
[Fri Dec 10 22:27:46 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[Fri Dec 10 22:27:46 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[Fri Dec 10 22:27:46 2021] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[Fri Dec 10 22:27:46 2021] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[Fri Dec 10 22:27:46 2021] of_cfs_init
[Fri Dec 10 22:27:46 2021] of_cfs_init: OK
[Fri Dec 10 22:27:46 2021] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[Fri Dec 10 22:27:46 2021] Waiting for root device /dev/mmcblk0p2...
[Fri Dec 10 22:27:46 2021] random: fast init done
[Fri Dec 10 22:27:46 2021] mmc1: new high speed SDIO card at address 0001
[Fri Dec 10 22:27:46 2021] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[Fri Dec 10 22:27:46 2021] mmcblk0: mmc0:aaaa SC16G 14.8 GiB 
[Fri Dec 10 22:27:46 2021]  mmcblk0: p1 p2
[Fri Dec 10 22:27:46 2021] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Fri Dec 10 22:27:46 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[Fri Dec 10 22:27:47 2021] F2FS-fs (mmcblk0p2): recover fsync data on readonly fs
[Fri Dec 10 22:27:47 2021] F2FS-fs (mmcblk0p2): Mounted with checkpoint version = 718da3
[Fri Dec 10 22:27:47 2021] VFS: Mounted root (f2fs filesystem) readonly on device 179:2.
[Fri Dec 10 22:27:47 2021] devtmpfs: mounted
[Fri Dec 10 22:27:47 2021] Freeing unused kernel memory: 3712K
[Fri Dec 10 22:27:47 2021] Run /sbin/init as init process
[Fri Dec 10 22:27:47 2021]   with arguments:
[Fri Dec 10 22:27:47 2021]     /sbin/init
[Fri Dec 10 22:27:47 2021]     nofont
[Fri Dec 10 22:27:47 2021]   with environment:
[Fri Dec 10 22:27:47 2021]     HOME=/
[Fri Dec 10 22:27:47 2021]     TERM=linux
[Fri Dec 10 22:27:47 2021]     selinux=0
[Fri Dec 10 22:27:47 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[Fri Dec 10 22:27:47 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Fri Dec 10 22:27:47 2021] usb 1-1: Product: USB2.0 Hub
[Fri Dec 10 22:27:47 2021] hub 1-1:1.0: USB hub found
[Fri Dec 10 22:27:47 2021] hub 1-1:1.0: 4 ports detected
[Fri Dec 10 22:27:47 2021] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd
[Fri Dec 10 22:27:47 2021] usb 1-1.1: New USB device found, idVendor=1241, idProduct=1603, bcdDevice= 2.80
[Fri Dec 10 22:27:47 2021] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Fri Dec 10 22:27:47 2021] usb 1-1.1: Product: USB Keyboard
[Fri Dec 10 22:27:47 2021] usb 1-1.1: Manufacturer:  
[Fri Dec 10 22:27:47 2021] input:   USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1241:1603.0001/input/input0
[Fri Dec 10 22:27:47 2021] hid-generic 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:01:00.0-1.1/input0
[Fri Dec 10 22:27:47 2021] input:   USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1241:1603.0002/input/input1
[Fri Dec 10 22:27:47 2021] input:   USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1241:1603.0002/input/input2
[Fri Dec 10 22:27:47 2021] hid-generic 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:01:00.0-1.1/input1
[Fri Dec 10 22:27:47 2021] random: udevd: uninitialized urandom read (16 bytes read)
[Fri Dec 10 22:27:47 2021] random: udevd: uninitialized urandom read (16 bytes read)
[Fri Dec 10 22:27:47 2021] random: udevd: uninitialized urandom read (16 bytes read)
[Fri Dec 10 22:27:47 2021] udevd[397]: starting eudev-3.2.10
[Fri Dec 10 22:27:48 2021] pps_core: LinuxPPS API ver. 1 registered
[Fri Dec 10 22:27:48 2021] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[Fri Dec 10 22:27:48 2021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[Fri Dec 10 22:27:48 2021] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[Fri Dec 10 22:27:48 2021] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[Fri Dec 10 22:27:48 2021] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[Fri Dec 10 22:27:48 2021] pps pps0: new PPS source pps@12.-1
[Fri Dec 10 22:27:48 2021] pps pps0: Registered IRQ 53 as PPS source
[Fri Dec 10 22:27:48 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[Fri Dec 10 22:27:48 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[Fri Dec 10 22:27:48 2021] [vc_sm_connected_init]: start
[Fri Dec 10 22:27:48 2021] [vc_sm_connected_init]: installed successfully
[Fri Dec 10 22:27:48 2021] mc: Linux media interface: v0.10
[Fri Dec 10 22:27:48 2021] videodev: Linux video capture interface: v2.00
[Fri Dec 10 22:27:48 2021] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[Fri Dec 10 22:27:48 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[Fri Dec 10 22:27:48 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[Fri Dec 10 22:27:48 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[Fri Dec 10 22:27:48 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[Fri Dec 10 22:27:48 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[Fri Dec 10 22:27:48 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[Fri Dec 10 22:27:48 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Fri Dec 10 22:27:48 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[Fri Dec 10 22:27:48 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[Fri Dec 10 22:27:48 2021] checking generic (3e330000 8ca000) vs hw (0 ffffffffffffffff)
[Fri Dec 10 22:27:48 2021] fb0: switching to vc4 from simple
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[Fri Dec 10 22:27:48 2021] Console: switching to colour dummy device 80x25
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[Fri Dec 10 22:27:48 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[Fri Dec 10 22:27:48 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[Fri Dec 10 22:27:48 2021] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[Fri Dec 10 22:27:48 2021] brcmfmac: F1 signature read @0x18000000=0x15264345
[Fri Dec 10 22:27:48 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[Fri Dec 10 22:27:48 2021] usbcore: registered new interface driver brcmfmac
[Fri Dec 10 22:27:48 2021] rtc-ds1307 1-0068: registered as rtc0
[Fri Dec 10 22:27:48 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[Fri Dec 10 22:27:48 2021] Console: switching to colour frame buffer device 240x75
[Fri Dec 10 22:27:48 2021] vc4-drm gpu: [drm] fb0: vc4 frame buffer device
[Fri Dec 10 22:27:48 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[Fri Dec 10 22:27:48 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[Fri Dec 10 22:27:48 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2
lsmod:
Code:
Module                  Size  Used by
i2c_bcm2708            16384  0
8021q                  32768  0
garp                   16384  1 8021q
stp                    20480  1 garp
llc                    20480  2 stp,garp
ipv6                  552960  28
zram                   28672  2
zsmalloc               36864  1 zram
rtc_ds1307             32768  0
brcmfmac              331776  0
regmap_i2c             16384  1 rtc_ds1307
spidev                 24576  0
vc4                   278528  0
brcmutil               24576  1 brcmfmac
bcm2835_v4l2           45056  0
bcm2835_codec          49152  0
bcm2835_isp            32768  0
bcm2835_mmal_vchiq     40960  3 bcm2835_codec,bcm2835_v4l2,bcm2835_isp
v4l2_mem2mem           40960  1 bcm2835_codec
videobuf2_vmalloc      20480  1 bcm2835_v4l2
cec                    53248  1 vc4
cfg80211              872448  1 brcmfmac
videobuf2_dma_contig    24576  2 bcm2835_codec,bcm2835_isp
v3d                    81920  0
videobuf2_memops       20480  2 videobuf2_vmalloc,videobuf2_dma_contig
drm_kms_helper        294912  3 vc4
videobuf2_v4l2         32768  4 bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem,bcm2835_isp
rfkill                 36864  1 cfg80211
videobuf2_common       65536  8 bcm2835_codec,videobuf2_vmalloc,videobuf2_dma_contig,videobuf2_v4l2,bcm2835_v4l2,v4l2_mem2mem,videobuf2_memops,bcm2835_isp
gpu_sched              45056  1 v3d
snd_soc_core          245760  1 vc4
videodev              262144  6 bcm2835_codec,videobuf2_v4l2,bcm2835_v4l2,videobuf2_common,v4l2_mem2mem,bcm2835_isp
snd_compress           20480  1 snd_soc_core
mc                     61440  6 videodev,bcm2835_codec,videobuf2_v4l2,videobuf2_common,v4l2_mem2mem,bcm2835_isp
drm                   577536  5 gpu_sched,drm_kms_helper,v3d,vc4
snd_pcm_dmaengine      20480  1 snd_soc_core
snd_pcm               135168  3 snd_compress,snd_soc_core,snd_pcm_dmaengine
snd_timer              36864  1 snd_pcm
drm_panel_orientation_quirks    24576  1 drm
snd                    98304  4 snd_timer,snd_compress,snd_soc_core,snd_pcm
i2c_bcm2835            16384  0
raspberrypi_hwmon      16384  0
pwm_raspberrypi_poe    16384  0
vc_sm_cma              36864  2 bcm2835_mmal_vchiq,bcm2835_isp
spi_bcm2835            24576  0
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
backlight              20480  2 drm_kms_helper,drm
pps_gpio               16384  1
rpivid_mem             16384  0
pps_core               20480  2 pps_gpio
uio_pdrv_genirq        16384  0
uio                    24576  1 uio_pdrv_genirq
Other things:
Code:
root@ntp:~/d# fgrep -i poe /boot/config
CONFIG_PPPOE=m
CONFIG_RPI_POE_POWER=m
CONFIG_PWM_RASPBERRYPI_POE=m
root@ntp:~/d# fgrep -i poe /boot/config.txt
dtoverlay=rpi-poe
dtparam=poe_fan_temp0=35000
dtparam=poe_fan_temp1=60000
dtparam=poe_fan_temp2=70000
dtparam=poe_fan_temp3=80000
root@ntp:~/d#
 
Old 12-11-2021, 12:36 PM   #67
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,918

Original Poster
Rep: Reputation: Disabled
looked at the changes, there are related commits.
try a new kernel 5.15.7
 
Old 12-11-2021, 12:50 PM   #68
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Rep: Reputation: Disabled
Quote:
Originally Posted by sndwvs View Post
looked at the changes, there are related commits.
try a new kernel 5.15.7
Hi sndwvs,

Is it OK that the modules package is unusually large? (~600 MB while it's 16 MB for the Pi3)
 
Old 12-11-2021, 01:06 PM   #69
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,918

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by wowbaggerHU View Post
Hi sndwvs,
Is it OK that the modules package is unusually large? (~600 MB while it's 16 MB for the Pi3)
Hi wowbaggerHU,
no i updated.
 
1 members found this post helpful.
Old 12-11-2021, 01:33 PM   #70
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Rep: Reputation: Disabled
Hi sndwvs,

Unfortunately the fan is still standing still after the upgrade.
I did not see any "pwm" or "poe" strings in the output of dmesg.
 
Old 12-11-2021, 01:42 PM   #71
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,918

Original Poster
Rep: Reputation: Disabled
try to manually load the modules and see the output dmesg:
Code:
modprobe gpio-fan gpio-pwm pwm-bcm2835 pwm-raspberrypi-poe raspberrypi-hwmon rpi_poe_power
 
Old 12-11-2021, 03:51 PM   #72
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Rep: Reputation: Disabled
Quote:
Originally Posted by sndwvs View Post
try to manually load the modules and see the output dmesg:
Code:
modprobe gpio-fan gpio-pwm pwm-bcm2835 pwm-raspberrypi-poe raspberrypi-hwmon rpi_poe_power
Hi sndwvs,

Code:
root@ntp:~# modprobe gpio-fan; modprobe gpio-pwm; modprobe pwm-bcm2835; modprobe pwm-raspberrypi-poe; modprobe raspberrypi-hwmon; modprobe rpi_poe_power
root@ntp:~# dmesg -T | tail
[Sat Dec 11 20:30:06 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[Sat Dec 11 20:30:59 2021] zram: Removed device: zram0
[Sat Dec 11 20:30:59 2021] zram: Added device: zram0
[Sat Dec 11 20:31:00 2021] zram0: detected capacity change from 0 to 2097152
[Sat Dec 11 20:31:00 2021] Adding 1048572k swap on /dev/zram0.  Priority:10 extents:1 across:1048572k SSFS
< first try, but turned out I had to call modprobe with one module name each >
[Sat Dec 11 22:47:07 2021] gpio_fan: unknown parameter 'gpio-pwm' ignored
[Sat Dec 11 22:47:07 2021] gpio_fan: unknown parameter 'pwm-bcm2835' ignored
[Sat Dec 11 22:47:07 2021] gpio_fan: unknown parameter 'pwm-raspberrypi-poe' ignored
[Sat Dec 11 22:47:07 2021] gpio_fan: unknown parameter 'raspberrypi-hwmon' ignored
[Sat Dec 11 22:47:07 2021] gpio_fan: unknown parameter 'rpi_poe_power' ignored
< second try >
< eof >
root@ntp:~# lsmod
Module                  Size  Used by
rpi_poe_power          16384  0
pwm_bcm2835            16384  0
gpio_pwm               16384  0
gpio_fan               16384  0
i2c_bcm2708            16384  0
8021q                  32768  0
garp                   16384  1 8021q
stp                    20480  1 garp
llc                    20480  2 stp,garp
ipv6                  552960  28
zram                   28672  2
zsmalloc               36864  1 zram
rtc_ds1307             32768  0
vc4                   278528  0
regmap_i2c             16384  1 rtc_ds1307
spidev                 24576  0
cec                    53248  1 vc4
brcmfmac              331776  0
drm_kms_helper        294912  3 vc4
brcmutil               24576  1 brcmfmac
snd_soc_core          245760  1 vc4
bcm2835_codec          49152  0
v3d                    81920  0
bcm2835_v4l2           45056  0
bcm2835_isp            32768  0
snd_compress           20480  1 snd_soc_core
cfg80211              872448  1 brcmfmac
bcm2835_mmal_vchiq     40960  3 bcm2835_codec,bcm2835_v4l2,bcm2835_isp
v4l2_mem2mem           40960  1 bcm2835_codec
snd_pcm_dmaengine      20480  1 snd_soc_core
gpu_sched              45056  1 v3d
snd_pcm               135168  3 snd_compress,snd_soc_core,snd_pcm_dmaengine
videobuf2_vmalloc      20480  1 bcm2835_v4l2
videobuf2_dma_contig    24576  2 bcm2835_codec,bcm2835_isp
videobuf2_memops       20480  2 videobuf2_vmalloc,videobuf2_dma_contig
rfkill                 36864  1 cfg80211
videobuf2_v4l2         32768  4 bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem,bcm2835_isp
snd_timer              36864  1 snd_pcm
videobuf2_common       65536  8 bcm2835_codec,videobuf2_vmalloc,videobuf2_dma_contig,videobuf2_v4l2,bcm2835_v4l2,v4l2_mem2mem,videobuf2_memops,bcm2835_isp
snd                    98304  4 snd_timer,snd_compress,snd_soc_core,snd_pcm
drm                   577536  5 gpu_sched,drm_kms_helper,v3d,vc4
videodev              262144  6 bcm2835_codec,videobuf2_v4l2,bcm2835_v4l2,videobuf2_common,v4l2_mem2mem,bcm2835_isp
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
drm_panel_orientation_quirks    24576  1 drm
sysimgblt              16384  1 drm_kms_helper
mc                     61440  6 videodev,bcm2835_codec,videobuf2_v4l2,videobuf2_common,v4l2_mem2mem,bcm2835_isp
fb_sys_fops            16384  1 drm_kms_helper
backlight              20480  2 drm_kms_helper,drm
i2c_bcm2835            16384  0
pwm_raspberrypi_poe    16384  0
vc_sm_cma              36864  2 bcm2835_mmal_vchiq,bcm2835_isp
raspberrypi_hwmon      16384  0
pps_gpio               16384  1
spi_bcm2835            24576  0
pps_core               20480  2 pps_gpio
rpivid_mem             16384  0
uio_pdrv_genirq        16384  0
uio                    24576  1 uio_pdrv_genirq
Unfortunately the fan still stands still.
Last edited by wowbaggerHU; 12-11-2021 at 03:53 PM.
 
Old 12-11-2021, 04:16 PM   #73
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,918

Original Poster
Rep: Reputation: Disabled
here they propose to update the firmware and try to change the pins of the gpio.
 
Old 12-12-2021, 10:11 PM   #74
sndwvs
Senior Member
 
Registered: Aug 2014
Posts: 1,918

Original Poster
Rep: Reputation: Disabled
try the previous kernel 5.14.21
 
Old 12-13-2021, 10:03 AM   #75
wowbaggerHU
Member
 
Registered: Feb 2017
Location: Hungary
Distribution: Slackware
Posts: 288

Rep: Reputation: Disabled
Quote:
Originally Posted by sndwvs View Post
try the previous kernel 5.14.21
Hi sndwvs,

Sorry but I had little time to work on this. I tested your older kernel, but the fan still doesn't turn. As others describe it: on boot, it moves slightly, but it doesn't even complete on full turn, and stands still from then on.

I did not yet have time to explore update the firmware and to change the GPIO pins. (I also have a gps module plus an RTC connected to the board.)
 
  


Reply
Page 5 of 7 « First 34 5 67



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
LXer: Raspberry Pi: Combine a Raspberry Pi with up to 4 Raspberry Pi Zeros for less than US$50 with the Cluster HAT LXer Syndicated Linux News 0 07-05-2019 12:03 PM
LXer: Ubuntu 13.04 Aims For 64-bit ARM Support (AArch64) LXer Syndicated Linux News 0 11-01-2012 04:10 AM
LXer: AArch64 Called For Merging To GCC Trunk LXer Syndicated Linux News 0 10-23-2012 05:42 PM
LXer: ARM64/AArch64 Support Going Into Linux 3.7 Kernel LXer Syndicated Linux News 0 10-02-2012 06:20 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware > Slackware - ARM

All times are GMT -5. The time now is 08:27 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration