SBo scripts not building on current (read 1st post, pls)

montagdude · 05-16-2016, 08:31 PM

Trying to install all required dependencies for kdenlive, I ran into this problem with libquicktime:

Code:

libtool: link: gcc -shared  .libs/vorbis.o .libs/lqt_vorbis.o   -Wl,-rpath -Wl,/tmp/SBo/libquicktime-1.2.4/src/.libs ../../src/.libs/libquicktime.so /usr/lib/libvorbisenc.so -L/usr/lib /usr/lib/libvorbis.so /usr/lib/libvorbisfile.so -lpthread -lm -lz -ldl    -Wl,-soname -Wl,lqt_vorbis.so -o .libs/lqt_vorbis.so
/usr/lib/libvorbisenc.so: error adding symbols: File in wrong format
collect2: error: ld returned 1 exit status
Makefile:374: recipe for target 'lqt_vorbis.la' failed

This error doesn't mean much to me, so I'm not sure what the problem is.

bassmadrigal · 05-16-2016, 09:34 PM

Quote:

Originally Posted by montagdude

Code:

error adding symbols: File in wrong format

If you ever see that, it is almost always due to multilib (or you just managed to install the wrong package). It means it is expecting one format (64bit), but found another (32bit).

Check out the FAQ on SBo for details on how to fix it.

montagdude · 05-16-2016, 09:49 PM

Quote:

Originally Posted by bassmadrigal

If you ever see that, it is almost always due to multilib (or you just managed to install the wrong package). It means it is expecting one format (64bit), but found another (32bit).

Check out the FAQ on SBo for details on how to fix it.

Ah, that makes sense. Thanks, I will look into it.

Edit: Adding LDFLAGS="-L/usr/lib64" to the SlackBuild as the FAQ recommends worked.

montagdude · 05-16-2016, 10:21 PM

Okay, I don't think this one was my fault, but of course I'm probably wrong. I had this issue with mlt:

Code:

make[2]: Entering directory '/tmp/SBo/mlt-6.0.0/src/modules/lumas'
install -d /tmp/SBo/package-mlt/usr/share/mlt/lumas/PAL
install -d /tmp/SBo/package-mlt/usr/share/mlt/lumas/NTSC
install -m 644 PAL/* /tmp/SBo/package-mlt/usr/share/mlt/lumas/PAL
install: cannot stat 'PAL/*': No such file or directory
Makefile:26: recipe for target 'install' failed
make[2]: *** [install] Error 1

The problem is that /tmp/SBo/mlt-6.0.0/src/modules/lumas/PAL (and also /tmp/SBo/mlt-6.0.0/src/modules/lumas/NTSC) is empty. I removed the two lines that attempt to install PAL/* and NTSC/* from the Makefile in /tmp/SBo/mlt-6.0.0/src/modules/lumas, and then the build finished and I was able to install the package. Whether this actually fixed the problem or merely let me ignore it for now and install the package, I'm not sure.

willysr · 05-16-2016, 11:26 PM

tested on a clean VM and mlt 0.6.0 works fine here

Quote:

Slackware package /tmp/mlt-6.0.0-x86_64-1_SBo.tgz created

montagdude · 05-16-2016, 11:36 PM

Okay, thanks for checking. It probably has to do with something that I either installed or removed, then. Sorry about burdening you with a something that was apparently my fault. I'll set up a clean VM like you did and test that myself first next time before reporting a problem.

Raveriux · 05-18-2016, 10:06 AM

openCASCADE wont build on system with multilib installed. Similar problem as solved here:http://www.linuxquestions.org/questi...ltilib-886840/

ponce · 05-18-2016, 10:09 AM

Quote:

Originally Posted by Raveriux

openCASCADE wont build on system with multilib installed. Similar problem as solved here:http://www.linuxquestions.org/questi...ltilib-886840/

https://slackbuilds.org/faq/#multilib (I just saw it's also the first answer in the thread you linked).

Raveriux · 05-19-2016, 03:46 AM

Quote:

Originally Posted by ponce

https://slackbuilds.org/faq/#multilib (I just saw it's also the first answer in the thread you linked).

ups. sorry, my mistake. Thank You!

ponce · 05-19-2016, 04:12 AM

orbea · 05-21-2016, 10:36 PM

Edit: No need.

kjhambrick · 05-26-2016, 06:07 PM

SBo Maintainers --

Saw this article:

http://xmodulo.com/how-to-detect-ip-...flicts-in.html

and then saw that there is a 14.1 SlackBuild for network/arp-scan.

Looked like a fun toy / useful tool to have on hand.

Grabbed the arp-scan SlackBuild directory from the current github and took it for a spin.

The SlackBuild for arp-scan does not work any more because the DOWNLOAD was moved to github ...

Neither of these links in the old arp-scan.info file work any more:

Code:

DOWNLOAD="http://www.nta-monitor.com/files/arp-scan/arp-scan-1.9.tar.gz"
HOMEPAGE="http://www.nta-monitor.com/tools-resources/security-tools/arp-scan/"

However, I 'found' arp-scan on github: https://github.com/royhills/arp-scan.git

I've modified the SlackBuild to `git` the source ; run `autoreconf --install` ; run `configure` and then `grep VERSION=` from the resulting MakeFile for the SBo.txz file.

However, I am not sure about the conventions for github source and the DOWNLOAD= link in the .info file.

Do Y'All want a copy of my modified arp-scan.SlackBuild file ( attached ) ?

I can't find an example SlackBuild that invokes `git` but if there's a convention, I can fix the .info file as well.

Since there's no longer a tar.gz file,

Code:

MD5SUM="38584d6c1edfa9f6b41d496e4a5539f1"

is invalid as well.

Thanks for SBo !

-- kjh

willysr · 05-26-2016, 07:45 PM

kjhambrick: Thanks for reporting it.
It has been fixed in master branch now

montagdude · 05-26-2016, 10:45 PM

Minor documentation issue in libraries/backports-ssl-match-hostname:

VERSION variable in backports-ssl-match-hostname.info is listed as 3.5.1.0, but in the SlackBuild and the filename for the source download it is 3.5.0.1. This caused me to reinstall it, thinking my version was out of date, but really it wasn't.

willysr · 05-26-2016, 11:20 PM

Fixed in master branch.

Thanks