I setup using /usr/share/apsfilter ./SETUP

After choosing the driver for my printer which is Canon S400 but i use the driver Bjc600 because mt printer is not listed.

After that went to the test page and it work fine. I enter "Q" to quit and finished installation. After I open up my Konqueror and wanted to print the page I am broswing but nothing came out!!!! No error MSG!!! And it wont print in any program but the test page work!! I really need help in this project going on!

Can you print from somewhere else, like koffice, abiword or any text file?

no I CANT!!!

Anyone can help?

After you test your page, and know that it works, you do not press 'Q'. Instead you press 'I' (i believe), so that the printcap, and the apsfilter setup file can be saved as they were when you tested the page. Once you press 'I', you will be asked to enter a spool name for your printer (basically it is the name you want to give your printer). Once you do, you will be back to the main menu, and THEN, you can hit 'Q'.

Finally, if you want to test your printer after the setup, you can type 'lpr <filename>' at your CLI, and it should work.

GL

OK, this is an example from my computer:
/*
==================================================================
A P S F I L T E R S E T U P -- MAIN MENUE --
==================================================================

(D) Available Device Drivers in your gs binary
(R) Read Ghostscript driver documentation (devices.txt)

(1) Printer Driver Selection [ijs/DESKJET_970]
(2) Interface Setup [parallel]
(3) Paper Format [letter]
(4) Printing Quality [medium]
(5) Color Mode [full]
(6) Print Resolution in "dots per inch" [1200x1200]
(7) Default Printing Method [auto]

(T) Print Test Page
(V) View performance log (times of print attempts)

(A) Abort installation (don't do anything)
(I) ==> Install printer with values shown above - repeat this
step for installing multiple printers
(Q) ==> Finish installation

Your choice?

*/
Following this you should be typing "I" to install the printer just like LNXman and then follow thw instructions

Thanks for the help .Sorry but guys I have this problem while trying to print from i think any programs.



A print error occured. Error message received from system:

/usr/bin/lpr -P 's400' '-#1' '/tmp/kde-deep/kdeprint_QORMuMC' : execution failed with message:
Status Information: sending job 'deep@dabox+74' to s400@localhost connecting to 'localhost', attempt 1 connected to 'localhost' requesting printer s400@localhost job 'deep@dabox+74' transfer to s400@localhost failed error 'NONZERO RFC1179 ERROR CODE FROM SERVER' with ack 'ACK_FAIL' sending str '^Bs400' to s400@localhost error msg: 'spool queue for 's400' does not exist on server dabox.localdomain' error msg: ' non-existent printer or you need to run 'checkpc -f''

hey guys i got it to work!!!

LPRng
lpc reread
BSD-lpd
lpc restart all
others
/etc/rc.d/init.d/lpd restart
(adjust this to your OS)


but now got alignment problem. *sign*