Slackware This Forum is for the discussion of Slackware Linux.
Notices
Welcome to
LinuxQuestions.org , a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free.
Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
Are you new to LinuxQuestions.org? Visit the following links:
Site Howto |
Site FAQ |
Sitemap |
Register Now
If you have any problems with the registration process or your account login, please
contact us . If you need to reset your password,
click here .
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a
virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month.
Click here for more info.
#1
Member
Registered: Apr 2004
Location: Costa Rica
Distribution: slack current with 2.6.16.18 (still off the hook)
Posts: 284
Rep:
Kernel 2.4.26 recompile and optical drives problem
Hi there!!!
Something odd happen to me, I just recompile the 2.4.26 kernel (for a dual processor) and the optical drives just hide somewhere.
If I run
, the output show both of them on the scsi1 bus, the scsi emulation is there and the module is loaded, I append both drives to the lilo.conf but the drives are not present either has hda, hdb or sr0, sr1.
When I check the dmesg both drives show up there and there is confirmation about the ide-scsi emulation taking place, I'm running out of ideas so any help will be welcome.
Thanks a bunch.
#2
Member
Registered: Jun 2002
Location: Nova Scotia
Distribution: Debian (home), Kubuntu 7.04 (work)
Posts: 265
Rep:
If "cdrecord -scanbus" shows your drives, and "dmesg" does too, in what sense are they "hiding"?
#3
Member
Registered: Apr 2004
Location: Costa Rica
Distribution: slack current with 2.6.16.18 (still off the hook)
Posts: 284
Original Poster
Rep:
Well thanks, that might be it.
#4
Member
Registered: Apr 2004
Location: Costa Rica
Distribution: slack current with 2.6.16.18 (still off the hook)
Posts: 284
Original Poster
Rep:
Ok /dev/scdx doesn't work neither here is the /var/log/message from last boot, maybe someone can see someting that I missed.
Code:
May 17 19:23:13 darkstar syslogd 1.4.1: restart.
May 17 19:23:14 darkstar kernel: klogd 1.4.1, log source = /proc/kmsg started.
May 17 19:23:14 darkstar kernel: BIOS-provided physical RAM map:
May 17 19:23:14 darkstar kernel: 383MB LOWMEM available.
May 17 19:23:14 darkstar kernel: ACPI: RSDP (v000 GBT ) @ 0x000f7140
May 17 19:23:14 darkstar kernel: ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3000
May 17 19:23:14 darkstar kernel: ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3040
May 17 19:23:14 darkstar kernel: ACPI: MADT (v001 GBT 0x00000000 0x00000000) @ 0x17ff5740
May 17 19:23:14 darkstar kernel: ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x01000007) @ 0x00000000
May 17 19:23:14 darkstar kernel: ACPI: Local APIC address 0xfee00000
May 17 19:23:14 darkstar kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 17 19:23:14 darkstar kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
May 17 19:23:14 darkstar kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
May 17 19:23:14 darkstar kernel: IOAPIC[0]: Assigned apic_id 2
May 17 19:23:14 darkstar kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
May 17 19:23:14 darkstar kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
May 17 19:23:14 darkstar kernel: Using ACPI (MADT) for SMP configuration information
May 17 19:23:14 darkstar kernel: ide_setup: hda=ide-scsi
May 17 19:23:14 darkstar kernel: ide_setup: hdb=ide-scsi
May 17 19:23:14 darkstar kernel: Initializing CPU#0
May 17 19:23:14 darkstar kernel: Memory: 384876k/393152k available (2260k kernel code, 7888k reserved, 578k data, 324k init, 0k highmem)
May 17 19:23:14 darkstar kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
May 17 19:23:14 darkstar kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
May 17 19:23:14 darkstar kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
May 17 19:23:14 darkstar kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
May 17 19:23:14 darkstar kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 17 19:23:14 darkstar kernel: CPU: L2 cache: 256K
May 17 19:23:14 darkstar kernel: CPU serial number disabled.
May 17 19:23:14 darkstar kernel: Intel machine check architecture supported.
May 17 19:23:14 darkstar kernel: Intel machine check reporting enabled on CPU#0.
May 17 19:23:14 darkstar kernel: Enabling fast FPU save and restore... done.
May 17 19:23:14 darkstar kernel: Enabling unmasked SIMD FPU exception support... done.
May 17 19:23:14 darkstar kernel: Checking 'hlt' instruction... OK.
May 17 19:23:14 darkstar kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 17 19:23:14 darkstar kernel: CPU: L2 cache: 256K
May 17 19:23:14 darkstar kernel: Intel machine check reporting enabled on CPU#0.
May 17 19:23:14 darkstar kernel: Initializing CPU#1
May 17 19:23:14 darkstar kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 17 19:23:14 darkstar kernel: CPU: L2 cache: 256K
May 17 19:23:14 darkstar kernel: CPU serial number disabled.
May 17 19:23:14 darkstar kernel: Intel machine check reporting enabled on CPU#1.
May 17 19:23:14 darkstar kernel: Total of 2 processors activated (2582.11 BogoMIPS).
May 17 19:23:14 darkstar kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
May 17 19:23:14 darkstar kernel: ACPI: Subsystem revision 20040326
May 17 19:23:14 darkstar kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=1
May 17 19:23:14 darkstar kernel: PCI: Using configuration type 1
May 17 19:23:14 darkstar kernel: ACPI: Interpreter enabled
May 17 19:23:14 darkstar kernel: ACPI: Using IOAPIC for interrupt routing
May 17 19:23:14 darkstar kernel: ACPI: System [ACPI] (supports S0 S1 S4bios S5)
May 17 19:23:14 darkstar kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
May 17 19:23:14 darkstar kernel: PCI: Probing PCI hardware
May 17 19:23:14 darkstar kernel: testing the IO APIC.......................
May 17 19:23:14 darkstar kernel: .................................... done.
May 17 19:23:14 darkstar kernel: PCI: Using ACPI for IRQ routing
May 17 19:23:14 darkstar kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
May 17 19:23:14 darkstar kernel: Limiting direct PCI/PCI transfers.
May 17 19:23:14 darkstar kernel: isapnp: Scanning for PnP cards...
May 17 19:23:14 darkstar kernel: isapnp: No Plug & Play device found
May 17 19:23:14 darkstar kernel: Linux NET4.0 for Linux 2.4
May 17 19:23:14 darkstar kernel: Based upon Swansea University Computer Society NET3.039
May 17 19:23:14 darkstar kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de ).
May 17 19:23:14 darkstar kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
May 17 19:23:14 darkstar kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
May 17 19:23:14 darkstar kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
May 17 19:23:14 darkstar kernel: Floppy drive(s): fd0 is 1.44M
May 17 19:23:14 darkstar kernel: PPP generic driver version 2.4.2
May 17 19:23:14 darkstar kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
May 17 19:23:14 darkstar kernel: agpgart: Maximum main memory to use for agp memory: 321M
May 17 19:23:14 darkstar kernel: agpgart: Detected Intel 440BX chipset
May 17 19:23:14 darkstar kernel: agpgart: AGP aperture is 64M @ 0xe0000000
May 17 19:23:14 darkstar kernel: [drm] Initialized tdfx 1.0.0 20010216 on minor 0
May 17 19:23:14 darkstar kernel: [drm] AGP 0.99 Aperture @ 0xe0000000 64MB
May 17 19:23:14 darkstar kernel: [drm] Initialized radeon 1.7.0 20020828 on minor 1
May 17 19:23:14 darkstar kernel: [drm] AGP 0.99 Aperture @ 0xe0000000 64MB
May 17 19:23:14 darkstar kernel: [drm] Initialized i810 1.2.1 20020211 on minor 2
May 17 19:23:14 darkstar kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
May 17 19:23:14 darkstar kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 17 19:23:14 darkstar kernel: PIIX4: IDE controller at PCI slot 00:07.1
May 17 19:23:14 darkstar kernel: PIIX4: chipset revision 1
May 17 19:23:14 darkstar kernel: PIIX4: not 100%% native mode: will probe irqs later
May 17 19:23:14 darkstar kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
May 17 19:23:14 darkstar kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
May 17 19:23:14 darkstar kernel: hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33)
May 17 19:23:14 darkstar kernel: Partition check:
May 17 19:23:14 darkstar kernel: hdd: hdd1
May 17 19:23:14 darkstar kernel: SCSI subsystem driver Revision: 1.00
May 17 19:23:14 darkstar kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
May 17 19:23:14 darkstar kernel: scsi1 : SCSI host adapter emulation for IDE ATAPI devices
May 17 19:23:14 darkstar kernel: sda: sda1 sda2
May 17 19:23:14 darkstar logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1
May 17 19:23:14 darkstar kernel: sdb: sdb1
May 17 19:23:14 darkstar kernel: es1371: version v0.32 time 20:43:28 May 8 2005
May 17 19:23:14 darkstar kernel: usb.c: registered new driver usbdevfs
May 17 19:23:14 darkstar kernel: usb.c: registered new driver hub
May 17 19:23:14 darkstar kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
May 17 19:23:14 darkstar kernel: host/uhci.c: USB UHCI at I/O 0xd000, IRQ 19
May 17 19:23:14 darkstar kernel: usb.c: new USB bus registered, assigned bus number 1
May 17 19:23:14 darkstar kernel: hub.c: USB hub found
May 17 19:23:14 darkstar kernel: hub.c: 2 ports detected
May 17 19:23:14 darkstar kernel: usb.c: registered new driver usblp
May 17 19:23:14 darkstar kernel: printer.c: v0.13: USB Printer Device Class driver
May 17 19:23:14 darkstar kernel: Initializing USB Mass Storage driver...
May 17 19:23:14 darkstar kernel: usb.c: registered new driver usb-storage
May 17 19:23:14 darkstar kernel: USB Mass Storage support registered.
May 17 19:23:14 darkstar kernel: NET4: Linux TCP/IP 1.0 for NET4.0
May 17 19:23:14 darkstar kernel: IP Protocols: ICMP, UDP, TCP, IGMP
May 17 19:23:14 darkstar kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
May 17 19:23:14 darkstar kernel: TCP: Hash tables configured (established 32768 bind 32768)
May 17 19:23:14 darkstar kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
May 17 19:23:14 darkstar kernel: UMSDOS: msdos_read_super failed, mount aborted.
May 17 19:23:14 darkstar kernel: Freeing unused kernel memory: 324k freed
May 17 19:23:14 darkstar kernel: hub.c: new USB device 00:07.2-2, assigned address 2
May 17 19:23:14 darkstar kernel: scsi2 : SCSI emulation for USB Mass Storage devices
May 17 19:23:14 darkstar kernel: sdc: sdc1
May 17 19:23:14 darkstar kernel: Adding Swap: 497972k swap-space (priority -1)
May 17 19:23:14 darkstar kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
May 17 19:23:14 darkstar kernel: apm: disabled - APM is not SMP safe.
May 17 19:23:14 darkstar logger: /etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
May 17 19:23:14 darkstar logger: /etc/rc.d/rc.hotplug start (entering script)
May 17 19:23:14 darkstar kernel: See Documentation/networking/vortex.txt
May 17 19:23:14 darkstar kernel: 00:0c.0: 3Com PCI 3c905C Tornado at 0xe000. Vers LK1.1.18-ac
May 17 19:23:14 darkstar kernel: product code 484e rev 00.3 date 09-25-00
May 17 19:23:14 darkstar kernel: 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
May 17 19:23:14 darkstar kernel: MII transceiver found at address 24, status 7809.
May 17 19:23:14 darkstar kernel: Enabling bus-master transmits and whole-frame receives.
May 17 19:23:14 darkstar kernel: 00:0c.0: scatter/gather enabled. h/w checksums enabled
May 17 19:23:23 darkstar usb.agent[468]: ... no modules for USB product 0/0/0
May 17 19:23:23 darkstar logger: /etc/rc.d/rc.hotplug start (exiting script)
May 17 19:23:23 darkstar sshd[503]: Server listening on 0.0.0.0 port 22.
May 17 19:23:30 darkstar kernel: Creative EMU10K1 PCI Audio Driver, version 0.20, 22:45:21 May 14 2005
May 17 19:23:30 darkstar kernel: emu10k1: EMU10K1 rev 7 model 0x8027 found, IO at 0xd400-0xd41f, IRQ 16
May 17 19:23:30 darkstar kernel: ac97_codec: AC97 codec, id: TRA35 (TriTech TR A5)
All times are GMT -5. The time now is 09:56 PM .
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know .
