Devices wont automount
Hi to all.
I'm getting this weird behavior after a kernel update through update-manager.
Before that my USB Thumbdrive and my cell phone where automounted by Ubuntu and showed on my desktop as another drive.
I'm using Intrepid Ibex (8.10)
#uname -a
Linux yavin4 2.6.27-14-generic #1 SMP Fri Jul 24 22:19:33 UTC 2009 i686 GNU/Linux
An here is a snippet of my syslog and messages log for when i connect my thumbdrive and my phone.
#Messages
Jul 30 16:01:47 yavin4 kernel: [ 154.520020] usb 5-7: new high speed USB device using ehci_hcd and address 3
Jul 30 16:01:47 yavin4 kernel: [ 154.660267] usb 5-7: configuration #1 chosen from 1 choice
Jul 30 16:01:47 yavin4 kernel: [ 154.708594] Initializing USB Mass Storage driver...
Jul 30 16:01:47 yavin4 kernel: [ 154.724937] scsi4 : SCSI emulation for USB Mass Storage devices
Jul 30 16:01:47 yavin4 kernel: [ 154.746035] usbcore: registered new interface driver usb-storage
Jul 30 16:01:47 yavin4 kernel: [ 154.746343] USB Mass Storage support registered.
Jul 30 16:01:47 yavin4 kernel: [ 154.764060] usbcore: deregistering interface driver usb-storage
Jul 30 16:11:55 yavin4 kernel: [ 762.092026] usb 3-2: new full speed USB device using uhci_hcd and address 2
Jul 30 16:11:55 yavin4 kernel: [ 762.332026] usb 3-2: configuration #1 chosen from 1 choice
Jul 30 16:11:55 yavin4 kernel: [ 762.371734] Initializing USB Mass Storage driver...
Jul 30 16:11:55 yavin4 kernel: [ 762.394547] scsi5 : SCSI emulation for USB Mass Storage devices
Jul 30 16:11:55 yavin4 kernel: [ 762.424237] scsi6 : SCSI emulation for USB Mass Storage devices
Jul 30 16:11:55 yavin4 kernel: [ 762.436099] usbcore: registered new interface driver usb-storage
Jul 30 16:11:55 yavin4 kernel: [ 762.436401] USB Mass Storage support registered.
Jul 30 16:11:55 yavin4 kernel: [ 762.447339] usbcore: deregistering interface driver usb-storage
#Syslog
Jul 30 16:11:55 yavin4 kernel: [ 762.092026] usb 3-2: new full speed USB device using uhci_hcd and address 2
Jul 30 16:11:55 yavin4 kernel: [ 762.332026] usb 3-2: configuration #1 chosen from 1 choice
Jul 30 16:11:55 yavin4 kernel: [ 762.371734] Initializing USB Mass Storage driver...
Jul 30 16:11:55 yavin4 kernel: [ 762.394547] scsi5 : SCSI emulation for USB Mass Storage devices
Jul 30 16:11:55 yavin4 kernel: [ 762.404765] usb-storage: device found at 3
Jul 30 16:11:55 yavin4 kernel: [ 762.404771] usb-storage: waiting for device to settle before scanning
Jul 30 16:11:55 yavin4 kernel: [ 762.424237] scsi6 : SCSI emulation for USB Mass Storage devices
Jul 30 16:11:55 yavin4 kernel: [ 762.436099] usbcore: registered new interface driver usb-storage
Jul 30 16:11:55 yavin4 kernel: [ 762.436401] USB Mass Storage support registered.
Jul 30 16:11:55 yavin4 kernel: [ 762.436733] usb-storage: device found at 2
Jul 30 16:11:55 yavin4 kernel: [ 762.436738] usb-storage: waiting for device to settle before scanning
Jul 30 16:11:55 yavin4 kernel: [ 762.447339] usbcore: deregistering interface driver usb-storage
Jul 30 16:11:55 yavin4 pulseaudio[8685]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/usb_device_13fe_1a00_5B6B0800D4B4_if0_scsi_host
And they are correctly detected
# lsusb -v
Bus 003 Device 002: ID 0421:04ed Nokia Mobile Phones
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x04ed
bcdDevice 1.00
iManufacturer 1 Nokia
iProduct 2 Nokia N95
iSerial 3 ***************
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Bulk transfer method configuration
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 6 USB Mass Storage Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
Bus 005 Device 003: ID 13fe:1a00 Kingston Technology Company Inc. 512MB/1GB Flash Drive
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13fe Kingston Technology Company Inc.
idProduct 0x1a00 512MB/1GB Flash Drive
bcdDevice 1.00
iManufacturer 1 Kingston
iProduct 2 DataTraveler 2.0
iSerial 3 ***********
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
I've already tried to put in the /etc/modules the usb_storage module, but it won't work still.
I don't know what else to do. I hope someone can show me some light in this problem.
Thanks
|