I did not install with crouton, I flashed seabios then booted from usb and installed 14.04 Ubuntu from their site. The keyboard works into the advanced settings when I hold the shift key. But, when I fully load in they are unresponsive savor the power. Now I've grabbed every kernel that has been thrown on the web, updated, dedated, even reinstalled to upgrade back to 16.4 LTS. Then I did again.

If there is any direction that I could be pointed in would be greatly appreciated!


Acer Chromebook 14 - CB3-431, Ubuntu 16.

May 13 12:21:48 nimkora kernel: [ 1.157086] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 182
May 13 12:21:48 nimkora kernel: [ 1.157089] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May 13 12:21:48 nimkora kernel: [ 1.157638] i8042: Warning: Keylock active
May 13 12:21:48 nimkora kernel: [ 1.157949] i8042: probe of i8042 failed with error -22 <----(invalid arg?)


May 13 18:00:07 nimkora kernel: [ 1.612425] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 182
May 13 18:00:07 nimkora kernel: [ 1.612429] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May 13 18:00:07 nimkora kernel: [ 1.613148] i8042: Warning: Keylock active
May 13 18:00:07 nimkora kernel: [ 1.613337] serio: i8042 KBD port at 0x60,0x64 irq 182

May 13 12:21:48 nimkora kernel: [ 3.119721] cherryview-pinctrl: probe of INT33FF:00 failed with error -16 <---(busy?)

May 13 12:21:48 nimkora kernel: [ 3.131117] i2c-ELAN0000:00 supply vcc not found, using dummy regulator
May 13 12:21:48 nimkora kernel: [ 3.140445] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
May 13 12:21:48 nimkora kernel: [ 3.141642] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
May 13 12:21:48 nimkora kernel: [ 3.262370] input: Elan Touchpad as /devices/platform/808622C1:05/i2c-1/i2c-ELAN0000:00/input/input3

May 13 12:21:49 nimkora kernel: [ 3.735431] rt5645 i2c-10EC5650:00: failed to initialize gpiod <--- (?)

May 14 13:25:40 nimkora kernel: [ 5.767117] i2c-ELAN0000:00 supply vcc not found, using dummy regulator
May 14 13:25:40 nimkora kernel: [ 5.822204] i2c-10EC5650:00 supply avdd not found, using dummy regulator
May 14 13:25:40 nimkora kernel: [ 5.822228] i2c-10EC5650:00 supply cpvdd not found, using dummy regulator
May 14 13:25:40 nimkora kernel: [ 5.841094] proc_thermal 0000:00:0b.0: can't derive routing for PCI INT A
May 14 13:25:40 nimkora kernel: [ 5.841103] proc_thermal 0000:00:0b.0: PCI INT A: no GSI
May 14 13:25:40 nimkora kernel: [ 5.857929] proc_thermal 0000:00:0b.0: No auxiliary DTSs enabled
May 14 13:25:40 nimkora kernel: [ 5.858723] intel_sst_acpi 808622A8:00: LPE base: 0xd1000000 size:0x200000
May 14 13:25:40 nimkora kernel: [ 5.858729] intel_sst_acpi 808622A8:00: IRAM base: 0xd10c0000
May 14 13:25:40 nimkora kernel: [ 5.858765] intel_sst_acpi 808622A8:00: DRAM base: 0xd1100000
May 14 13:25:40 nimkora kernel: [ 5.858775] intel_sst_acpi 808622A8:00: SHIM base: 0xd1140000
May 14 13:25:40 nimkora kernel: [ 5.858783] intel_sst_acpi 808622A8:00: Mailbox base: 0xd1144000
May 14 13:25:40 nimkora kernel: [ 5.858791] intel_sst_acpi 808622A8:00: DDR base: 0x20000000
May 14 13:25:40 nimkora kernel: [ 5.858901] intel_sst_acpi 808622A8:00: Got drv data max stream 25
May 14 13:25:40 nimkora kernel: [ 5.868985] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 14 13:25:40 nimkora kernel: [ 5.893440] genirq: Flags mismatch irq 182. 00002002 (ELAN0000:00) vs. 00000080 (i8042)
May 14 13:25:40 nimkora kernel: [ 5.893577] elan_i2c i2c-ELAN0000:00: cannot register irq=182

May 14 13:25:40 nimkora kernel: [ 5.893728] elan_i2c: probe of i2c-ELAN0000:00 failed with error -16 <----(busy?

May 13 13:23:31 nimkora kernel: [ 27.577170] atkbd serio0: Failed to enable keyboard on isa0060/serio0
May 13 13:23:31 nimkora kernel: [ 27.577482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input13
May 13 13:23:34 nimkora kernel: [ 30.292850] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
May 13 13:23:34 nimkora kernel: [ 30.471234] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.

A chromebook has a PS/2 port? An 8042?

I just looked: it doesn't. It seems like you flashed the wrong BIOS.

Post output of

and

I seabiosed my Acer C710 Chromebook and Run AntiX 17 64 bit on mine with a version 4 kernel. Everything works on mine. But I am AntiX savvy.

Maybe this will serve your needs better since you like Ubuntu? It is Ubuntu based.

https://galliumos.org/

1. Mainline linux doesn't have audio or touchpad drivers necessarily for Chromebooks. Does for some, not all.

2. Full rom firmware offers better compatiblity

3. GalliumOS that rokytnji linked to is based on Ubuntu but has the ChromeOS touchpad and sound drivers patched onto the kernel, for absolutely perfect Chromebook functionality if it's supported (is that Chromebook Braswell, if so, it's supported).

Thank you for the help, rokytnji. I have looked at galliumos. It was appealing to just have it all ready for me but, That's not me. I'm in school for CS SoftEng and wanted to start understanding something other than windows. I like tearing through things and understanding, may have questions though.

Thank you Timothy, it is braswell and on the page I downloaded the seabois from said it wasn't compatible with full rom.

Yeah. I went with full rom on mine. But my Acer is older than yours.

Looks like you should try out maybe a

while keeping your booting kernel for safe keeping in case it don't boot up.

You can get it from

http://kernel.ubuntu.com/~kernel-ppa/mainline/

If it does not boot. Remove it booting into your working kernel. Update grub afterward of course.
Then go up from the list one by one



till it does boot and hopefully things improve. That is best I can suggest for poke and hope fixes.

Edit> I usually install headers and images when I do as I just suggested. For myself.
You might not need the headers. Since I don't know your user habits.

2nd edit. What version of Ubuntu are you on right now?

I ask because more current libs help with more current kernel installs.
During what I suggest that you do. First I do a


Then reboot after that.

in root terminal before I install newer kernels.

Don't know where you read it, but they're wrong.

well, now I'm glad you told me that. again. Maybe I misunderstood.

https://johnlewis.ie/custom-chromebo.../rom-download/

I didn't even know about Mrchromebox.

Update, I changed to

~sudo uname -a

Linux Syfilis 4.13.0-41-generic #46-Ubuntu SMP Wed May 2 13:38:30 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux~

~lsb_release -a

No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 17.10
Release: 17.10
Codename: artful


but my sound doesn't work now.

It's just showing that the sound card is a "Dummy Output" I've tried anything from removing the entire alsa-base and alsa-utils and reloading, purging them, even went as far as trying to use oss.

I went into terminal and fine tuned the touch pad and keyboard is great.

I'm sorry for the late response. Thank you guys!


<edit>

pulseaudio logs

pulseaudio --log-level=2
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed.

pule audio -vvv

E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="1" name="platform-cht-bsw-rt5645" card_name="alsa_card.platform-cht-bsw-rt5645" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed.

found a solution to the sound issue.

here

https://askubuntu.com/questions/9740...r-ubuntu-17-10

it provides a coppy of the asound.state on a link.

cheers.