slarm64This forum is for the discussion of slarm64.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
Processor Rockchip RK3568B2 Processor
L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processors
Quad-Core Cortex-A55 (1.992GHz)
ARMv8-A architecture with Neon and Crypto extensions
Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)
NPU 0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU
Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet
Memory LPDDR4x 4/8GiB with 32-bit bus width, , supports all-data-link ECC
Data rate: 3400 MT/s, up to 1,560MHz
Storage 1 x eMMC slot
1 x Micro SD slot (DS/HS mode up to UHS-I SDR104)
1 x NVME M.2 SSD (PCIe 3.0 x 2)
1 x SATA3.0
Networking 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
Realtek RTL8211F (Ethernet transceiver)
LED indicators
* Green LED: Flashing by data traffics at 100Mbps connection
* Amber LED: Flashing by data traffics at 1000Mbps connection
Video 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
Audio 1 x 3.5mm phone jack, 1 x mono line output
External I/O 2 x USB 2.0 host port
2 x USB 3.0 host port or 1 x USB 3.0 host port when USB 2.0 OTG port is dedicated
1 x Debug serial console (UART)
1 x SATA Connector
1 x Camera Serial Interface (15 pin)
1 x 40 pin GPIO
Other features IR receiver for remote controller
System LED Indicators:
Red (POWER) – Solid light when DC power is connected
Blue (ALIVE) – Flashing like heartbeat while Kernel is running. Solid On in the u-boot stage.
Power 1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm
DC input : 7.5V ~ 15.5V
DC 12V/2A power adapter is recommended
IDLE : ≃ 1.25W
CPU Stress : ≃ 4.44W (Performance governor)
Power Off : ≃ 0W
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.