Last part of dmesg
0.808018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.808059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.808062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808064] usb usb3: Product: EHCI Host Controller
[ 0.808067] usb usb3: Manufacturer: Linux 4.2.6-040206-generic ehci_hcd
[ 0.808069] usb usb3: SerialNumber: 0000:00:1a.7
[ 0.808209] hub 3-0:1.0: USB hub found
[ 0.808217] hub 3-0:1.0: 6 ports detected
[ 0.808457] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.808463] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.808472] ehci-pci 0000:00:1d.7: debug port 1
[ 0.812354] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.812364] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe0426000
[ 0.824017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.824070] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.824073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824075] usb usb4: Product: EHCI Host Controller
[ 0.824078] usb usb4: Manufacturer: Linux 4.2.6-040206-generic ehci_hcd
[ 0.824080] usb usb4: SerialNumber: 0000:00:1d.7
[ 0.824216] hub 4-0:1.0: USB hub found
[ 0.824222] hub 4-0:1.0: 6 ports detected
[ 0.824359] ehci-platform: EHCI generic platform driver
[ 0.824369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.824373] ohci-pci: OHCI PCI platform driver
[ 0.824385] ohci-platform: OHCI generic platform driver
[ 0.824393] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.824498] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.824503] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 0.824509] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.824525] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030c0
[ 0.824569] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.824571] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824573] usb usb5: Product: UHCI Host Controller
[ 0.824575] usb usb5: Manufacturer: Linux 4.2.6-040206-generic uhci_hcd
[ 0.824577] usb usb5: SerialNumber: 0000:00:1a.0
[ 0.824669] hub 5-0:1.0: USB hub found
[ 0.824675] hub 5-0:1.0: 2 ports detected
[ 0.824855] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.824862] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[ 0.824867] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.824882] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
[ 0.824919] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.824921] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824922] usb usb6: Product: UHCI Host Controller
[ 0.824924] usb usb6: Manufacturer: Linux 4.2.6-040206-generic uhci_hcd
[ 0.824926] usb usb6: SerialNumber: 0000:00:1a.1
[ 0.825025] hub 6-0:1.0: USB hub found
[ 0.825031] hub 6-0:1.0: 2 ports detected
[ 0.825209] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.825215] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 0.825220] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.825235] uhci_hcd 0000:00:1a.2: irq 17, io base 0x00003080
[ 0.825273] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.825275] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.825276] usb usb7: Product: UHCI Host Controller
[ 0.825278] usb usb7: Manufacturer: Linux 4.2.6-040206-generic uhci_hcd
[ 0.825280] usb usb7: SerialNumber: 0000:00:1a.2
[ 0.825375] hub 7-0:1.0: USB hub found
[ 0.825381] hub 7-0:1.0: 2 ports detected
[ 0.825557] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.825562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 0.825568] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.825583] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
[ 0.825620] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.825622] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.825624] usb usb8: Product: UHCI Host Controller
[ 0.825625] usb usb8: Manufacturer: Linux 4.2.6-040206-generic uhci_hcd
[ 0.825627] usb usb8: SerialNumber: 0000:00:1d.0
[ 0.825720] hub 8-0:1.0: USB hub found
[ 0.825726] hub 8-0:1.0: 2 ports detected
[ 0.825903] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.825908] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 0.825913] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.825933] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
[ 0.825971] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.825973] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.825974] usb usb9: Product: UHCI Host Controller
[ 0.825976] usb usb9: Manufacturer: Linux 4.2.6-040206-generic uhci_hcd
[ 0.825978] usb usb9: SerialNumber: 0000:00:1d.1
[ 0.826069] hub 9-0:1.0: USB hub found
[ 0.826074] hub 9-0:1.0: 2 ports detected
[ 0.826250] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.826255] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 0.826260] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.826277] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
[ 0.826313] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.826315] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.826317] usb usb10: Product: UHCI Host Controller
[ 0.826319] usb usb10: Manufacturer: Linux 4.2.6-040206-generic uhci_hcd
[ 0.826320] usb usb10: SerialNumber: 0000:00:1d.2
[ 0.826413] hub 10-0:1.0: USB hub found
[ 0.826418] hub 10-0:1.0: 2 ports detected
[ 0.826532] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.829742] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.829747] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.829877] mousedev: PS/2 mouse device common for all mice
[ 0.830011] rtc_cmos 00:01: RTC can wake from S4
[ 0.830122] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.830140] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[ 0.830148] i2c /dev entries driver
[ 0.830225] device-mapper: uevent: version 1.0.3
[ 0.830295] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised:
dm-devel@redhat.com
[ 0.830310] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.830426] PCCT header not found.
[ 0.830630] NET: Registered protocol family 10
[ 0.830810] NET: Registered protocol family 17
[ 0.830821] Key type dns_resolver registered
[ 0.831097] Loading compiled-in X.509 certificates
[ 0.831988] Loaded X.509 cert 'Build time autogenerated kernel key: 57e650f5ffb026b13ad82755e960dbcee87346bb'
[ 0.832011] registered taskstats version 1
[ 0.832031] zswap: loading zswap
[ 0.832034] zswap: using zbud pool
[ 0.832038] zswap: using lzo compressor
[ 0.833759] Key type trusted registered
[ 0.836545] Key type encrypted registered
[ 0.836550] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.860035] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
[ 0.860339] ima: No TPM chip found, activating TPM-bypass!
[ 0.860357] evm: HMAC attrs: 0x1
[ 0.860670] Magic number: 11:143:283
[ 0.860772] rtc_cmos 00:01: setting system clock to 2015-12-12 14:17:20 UTC (1449929840)
[ 0.860977] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.860979] EDD information not available.
[ 0.861046] PM: Hibernation image not present or could not be loaded.
[ 1.114504] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.124999] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.264016] usb 9-2: new low-speed USB device number 2 using uhci_hcd
[ 1.441037] usb 9-2: New USB device found, idVendor=03f0, idProduct=0024
[ 1.441040] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.441043] usb 9-2: Product: HP Basic USB Keyboard
[ 1.441046] usb 9-2: Manufacturer: CHICONY
[ 1.532017] usb 10-1: new low-speed USB device number 2 using uhci_hcd
[ 1.540015] tsc: Refined TSC clocksource calibration: 2989.488 MHz
[ 1.540018] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b177b38cb2, max_idle_ns: 440795313434 ns
[ 1.580062] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.580072] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.580182] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.580200] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.588674] ata2.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
[ 1.588677] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.596131] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[ 1.596262] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 1.596265] ata1.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.604689] ata2.00: configured for UDMA/133
[ 1.612123] ata1.00: configured for UDMA/100
[ 1.621206] ata1.01: configured for UDMA/133
[ 1.622153] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
[ 1.637951] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.637954] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.638096] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.638163] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.638653] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
[ 1.638836] sd 0:0:1:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.638858] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.638891] sd 0:0:1:0: [sda] Write Protect is off
[ 1.638893] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.638916] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638941] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00M 0A01 PQ: 0 ANSI: 5
[ 1.639099] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.639157] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.639201] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.639204] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.639230] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.673496] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 1.673947] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.922043] usb 10-1: New USB device found, idVendor=045e, idProduct=0040
[ 1.922047] usb 10-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1.922049] usb 10-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 1.922052] usb 10-1: Manufacturer: Microsoft
[ 2.120875] sda: sda1 < sda5 >
[ 2.121170] sd 0:0:1:0: [sda] Attached SCSI disk
[ 2.121604] Freeing unused kernel memory: 1456K (ffffffff81d35000 - ffffffff81ea1000)
[ 2.121606] Write protecting the kernel read-only data: 12288k
[ 2.121756] Freeing unused kernel memory: 96K (ffff8800017e8000 - ffff880001800000)
[ 2.121851] Freeing unused kernel memory: 248K (ffff880001bc2000 - ffff880001c00000)
[ 2.131363] systemd-udevd[127]: starting version 204
[ 2.148402] pps_core: LinuxPPS API ver. 1 registered
[ 2.148405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.149782] PTP clock support registered
[ 2.153709] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[ 2.153710] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.153896] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.154707] scsi host6: pata_marvell
[ 2.156036] scsi host7: pata_marvell
[ 2.156085] ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
[ 2.156086] ata8: DUMMY
[ 2.163592] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.195231] usbcore: registered new interface driver usbhid
[ 2.195233] usbhid: USB HID core driver
[ 2.238073] firewire_ohci 0000:07:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.240911] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/0003:03F0:0024.0001/input/input5
[ 2.296189] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 2.296386] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/0003:045E:0040.0002/input/input6
[ 2.296475] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1/input0
[ 2.462090] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:6c:f3:e0
[ 2.462093] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.462114] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF
[ 2.540078] clocksource: Switched to clocksource tsc
[ 2.736101] firewire_core 0000:07:03.0: created device fw0: GUID 00902700021cbfca, S400
[ 5.176023] floppy0: no floppy controllers found
[ 6.403238] random: nonblocking pool is initialized
[ 6.469196] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.490590] init: ureadahead main process (277) terminated with status 5
[ 8.174550] Adding 9760764k swap on /dev/sdb6. Priority:-1 extents:1 across:9760764k FS
[ 8.572086] systemd-udevd[381]: starting version 204
[ 9.011362] lp: driver loaded but no devices found
[ 9.029492] ppdev: user-space parallel port driver
[ 9.101006] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 9.711541] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.853524] WARNING! power/level is deprecated; use power/control instead
[ 9.875773] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050C-0x000000000000050F (\IGPO) (20150619/utaddress-254)
[ 9.875779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.570759] device-mapper: multipath: version 1.9.0 loaded
[ 11.185277] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 11.273279] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 11.339156] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC268: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 11.339160] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.339162] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.339164] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 11.339165] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 11.339168] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 11.339170] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x1a
[ 11.339171] snd_hda_codec_realtek hdaudioC0D2: Line=0x19
[ 11.344606] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.344674] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.344739] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.344802] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.344866] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.616575] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 12.290782] init: failsafe main process (602) killed by TERM signal
[ 12.696028] floppy0: no floppy controllers found
[ 16.713589] init: cups main process (919) killed by HUP signal
[ 16.713598] init: cups main process ended, respawning
[ 16.808917] Bluetooth: Core ver 2.20
[ 16.808936] NET: Registered protocol family 31
[ 16.808937] Bluetooth: HCI device and connection manager initialized
[ 16.809112] Bluetooth: HCI socket layer initialized
[ 16.809115] Bluetooth: L2CAP socket layer initialized
[ 16.809122] Bluetooth: SCO socket layer initialized
[ 16.899744] Bluetooth: RFCOMM TTY layer initialized
[ 16.899750] Bluetooth: RFCOMM socket layer initialized
[ 16.899754] Bluetooth: RFCOMM ver 1.11
[ 16.995552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.995556] Bluetooth: BNEP filters: protocol multicast
[ 16.995560] Bluetooth: BNEP socket layer initialized
[ 21.339227] init: samba-ad-dc main process (1116) terminated with status 1
[ 22.268175] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.968875] e1000e: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None
[ 23.969036] e1000e 0000:00:19.0 eth0: Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.
[ 23.969038] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 23.969072] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.050331] init: plymouth-upstart-bridge main process ended, respawning
[ 24.054284] init: plymouth-upstart-bridge main process (1240) terminated with status 1
[ 24.054294] init: plymouth-upstart-bridge main process ended, respawning
[ 26.351782] init: plymouth-stop pre-start process (1593) terminated with status 1
[ 426.899729] perf interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000