|
USB no longer recognized
Today my USB stopped being recognized by F14 and I am trying to find a solution. I outputted the /var/log/messages to a txt file and the output after plugging in the drive is below...
May 27 16:08:50 localhost kernel: [53425.008068] usb 1-6: new high speed USB device using ehci_hcd and address 12
May 27 16:08:50 localhost kernel: [53425.277306] hub 1-0:1.0: unable to enumerate USB device on port 6
I was able to find a previous instance in the log file where the drive was recognized...
May 25 07:19:03 localhost kernel: [ 752.232033] usb 1-6: new high speed USB device using ehci_hcd and address 2
May 25 07:19:04 localhost kernel: [ 752.907624] usb 1-6: New USB device found, idVendor=05dc, idProduct=a813
May 25 07:19:04 localhost kernel: [ 752.907629] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 25 07:19:04 localhost kernel: [ 752.907633] usb 1-6: Product: USB Flash Drive
May 25 07:19:04 localhost kernel: [ 752.907635] usb 1-6: Manufacturer: Lexar
May 25 07:19:04 localhost kernel: [ 752.907638] usb 1-6: SerialNumber: AAELR6JJTDYYBNEG
May 25 07:19:04 localhost kernel: [ 753.303985] Initializing USB Mass Storage driver...
May 25 07:19:04 localhost kernel: [ 753.304322] scsi6 : usb-storage 1-6:1.0
May 25 07:19:04 localhost kernel: [ 753.304539] usbcore: registered new interface driver usb-storage
May 25 07:19:04 localhost kernel: [ 753.304542] USB Mass Storage support registered.
May 25 07:19:07 localhost kernel: [ 755.716223] scsi 6:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS
May 25 07:19:07 localhost kernel: [ 755.717140] sd 6:0:0:0: Attached scsi generic sg2 type 0
May 25 07:19:09 localhost kernel: [ 757.598538] sd 6:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
May 25 07:19:09 localhost kernel: [ 757.599541] sd 6:0:0:0: [sdb] Write Protect is off
May 25 07:19:09 localhost kernel: [ 757.599548] sd 6:0:0:0: [sdb] Assuming drive cache: write through
May 25 07:19:11 localhost kernel: [ 759.444645] sd 6:0:0:0: [sdb] Assuming drive cache: write through
May 25 07:19:11 localhost kernel: [ 759.444657] sdb: sdb1
May 25 07:19:11 localhost kernel: [ 759.449344] sd 6:0:0:0: [sdb] Assuming drive cache: write through
May 25 07:19:11 localhost kernel: [ 759.449352] sd 6:0:0:0: [sdb] Attached SCSI removable disk
where do I go from here?
Last edited by wcook1613; 05-27-2011 at 04:43 PM.
Reason: found additional information
|
