Problems with ISDN - Redhat 7.1. - AVM Fritzcard - 2.4.2
hi,
it's me again, with a silly question (for some people it is certaiinly a silly question).
ok, my problem is the configuration, resp. usage of my fritz card.
first of all, here my /var/log/messages:
Jul 31 16:37:51 Diablo kernel: ISDN subsystem Rev: 1.114.6.8/1.94.6.1/1.140.6.3/1.85.6.2/1.21/1.5.6.3 loaded
Jul 31 16:37:51 Diablo kernel: HiSax: Linux Driver for passive ISDN cards
Jul 31 16:37:51 Diablo kernel: HiSax: Version 3.5 (module)
Jul 31 16:37:51 Diablo kernel: HiSax: Layer1 Revision 2.41.6.2
Jul 31 16:37:51 Diablo kernel: HiSax: Layer2 Revision 2.25.6.1
Jul 31 16:37:51 Diablo kernel: HiSax: TeiMgr Revision 2.17.6.1
Jul 31 16:37:51 Diablo kernel: HiSax: Layer3 Revision 2.17.6.2
Jul 31 16:37:51 Diablo kernel: HiSax: LinkLayer Revision 2.51.6.1
Jul 31 16:37:51 Diablo kernel: HiSax: Approval certification failed because of
Jul 31 16:37:51 Diablo kernel: HiSax: unauthorized source code changes
Jul 31 16:37:51 Diablo kernel: HiSax: Total 1 card defined
Jul 31 16:37:51 Diablo kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Jul 31 16:37:51 Diablo kernel: HiSax: AVM PCI driver Rev. 1.22.6.4
Jul 31 16:37:51 Diablo kernel: PCI: Found IRQ 5 for device 00:10.0
Jul 31 16:37:51 Diablo kernel: AVM PCI: stat 0x2020a
Jul 31 16:37:51 Diablo kernel: AVM PCI: Class A Rev 2
Jul 31 16:37:51 Diablo kernel: HiSax: AVM Fritz!PCI config irq:5 base:0xE400
Jul 31 16:37:51 Diablo kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1
Jul 31 16:37:51 Diablo kernel: AVM Fritz PnP/PCI: IRQ 5 count 0
Jul 31 16:37:51 Diablo kernel: AVM Fritz PnP/PCI: IRQ 5 count 4
Jul 31 16:37:51 Diablo kernel: HiSax: DSS1 Rev. 2.30.6.1
Jul 31 16:37:51 Diablo kernel: HiSax: 2 channels added
Jul 31 16:37:51 Diablo kernel: HiSax: MAX_WAITING_CALLS added
Jul 31 16:37:51 Diablo kernel: HiSax: debugging flags card 1 set to 3ff
Jul 31 16:38:25 Diablo kernel: HiSax module removed
Jul 31 16:38:25 Diablo kernel: ISDN-subsystem unloaded
Jul 31 16:38:37 Diablo kernel: ISDN subsystem Rev: 1.114.6.8/1.94.6.1/1.140.6.3/1.85.6.2/1.21/1.5.6.3 loaded
Jul 31 16:38:38 Diablo kernel: HiSax: Linux Driver for passive ISDN cards
Jul 31 16:38:38 Diablo kernel: HiSax: Version 3.5 (module)
Jul 31 16:38:38 Diablo kernel: HiSax: Layer1 Revision 2.41.6.2
Jul 31 16:38:38 Diablo kernel: HiSax: Layer2 Revision 2.25.6.1
Jul 31 16:38:38 Diablo kernel: HiSax: TeiMgr Revision 2.17.6.1
Jul 31 16:38:38 Diablo kernel: HiSax: Layer3 Revision 2.17.6.2
Jul 31 16:38:38 Diablo kernel: HiSax: LinkLayer Revision 2.51.6.1
Jul 31 16:38:38 Diablo kernel: HiSax: Approval certification failed because of
Jul 31 16:38:38 Diablo kernel: HiSax: unauthorized source code changes
Jul 31 16:38:38 Diablo kernel: HiSax: Total 1 card defined
Jul 31 16:38:38 Diablo kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Jul 31 16:38:38 Diablo kernel: HiSax: AVM PCI driver Rev. 1.22.6.4
Jul 31 16:38:38 Diablo kernel: PCI: Found IRQ 5 for device 00:10.0
Jul 31 16:38:38 Diablo kernel: AVM PCI: stat 0x3020a
Jul 31 16:38:38 Diablo kernel: AVM PCI: Class A Rev 2
Jul 31 16:38:38 Diablo kernel: HiSax: AVM Fritz!PCI config irq:5 base:0xE400
Jul 31 16:38:38 Diablo kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1
Jul 31 16:38:38 Diablo kernel: AVM Fritz PnP/PCI: IRQ 5 count 4
Jul 31 16:38:38 Diablo kernel: AVM Fritz PnP/PCI: IRQ 5 count 7
Jul 31 16:38:38 Diablo kernel: HiSax: DSS1 Rev. 2.30.6.1
Jul 31 16:38:38 Diablo kernel: HiSax: 2 channels added
Jul 31 16:38:38 Diablo kernel: HiSax: MAX_WAITING_CALLS added
Jul 31 16:38:38 Diablo kernel: HiSax: debugging flags card 1 set to 3ff
Jul 31 17:35:42 Diablo kernel: HiSax module removed
Jul 31 17:35:42 Diablo kernel: ISDN-subsystem unloaded
ok, and here is my isdn.log :
---- /var/log/isdn.log -----
ippp0 added
EAZ/MSN for ippp0 is 019231750
Layer-2-Protocol for ippp0 is hdlc
Layer-3-Protocol for ippp0 is trans
Encapsulation for ippp0 is syncppp
Security for ippp0 is off
Hangup-Timeout for ippp0 is 360 sec.
Callback for ippp0 is off
Callback delay for ippp0 is 3 sec.
ippp0 bound to 0
ippp0 deleted
ippp0 added
EAZ/MSN for ippp0 is 019231750
Layer-2-Protocol for ippp0 is hdlc
Layer-3-Protocol for ippp0 is trans
Encapsulation for ippp0 is syncppp
Security for ippp0 is off
Hangup-Timeout for ippp0 is 360 sec.
Callback for ippp0 is off
Callback delay for ippp0 is 3 sec.
ippp0 bound to 0
ippp0 deleted
Can you see what's the problem ? I read the ISDN-HOWTO , but i could not fix the problem. In Windows there was a number which i had to call to connect to the provider , is this my MNS ? I read different things about it in different texts, therefore I ask...
It seems as if my redhat recognizes my AVM Fritzcard PCI! correctly, as my tool 'redhat internet config' shows this card (in hardware section).
if i want to connect to the provider , it says "Unable to connect to ..", what could be the reason for that.
If you need other files....or more information, please post it.
It would be important, as i'm just using windoze in order to connect to the inet, but i do no longer want to use win, so please ...
--TOL--
|