hello,

im trying to go in to dual mode with ISDN, from 64bit to 128bit, but i have a TA (termianl adapter), this one is configured like a normal modem, with AT-commands...

now im using WVDIAL...this is the wvdial.conf file:

modem = /dev/ttyS1 (com 2 :))
baund = 115200 (it works for 64bit)
init1 = ATZ (what else :))
init2 = ATQ0 V1 E1 S0=0 &C1 &D2 (this is the code fore 64bit)
phone =...
username =...
password =...

OK now the code to go on 2 channels (128bit) is ATB31
where shoud i put it, i tryed:

init1 = ATZ
init2 = ATB31 V1 E1 S0=0 &C1 &D2

init1 = ATZ
init2 = ATQ0 V1 E1 S0=0 &C1 &D2
init3 = ATB31

init1 = ATZ
init2 = ATB31
init3 = ATQ0 V1 E1 S0=0 &C1 &D2

. . .

im runing out of ideas, so if anyone has an TA and has goten on to 128bit mode please tell me how, even if you tryed somethig diferen!

P.S.
this has nothing to do with isdn4linux, because that is for ISDN cards, this is for a Terminal Adapter that is configured like a normal modem!!!

my TA:
http://www.stollmann.de/doku/cons/produkt_ta.pdf

any advice woud be helpfull, best regards...