Quote:
Originally Posted by johnsfine
Did you understand the message that tells you that you must run the program as root (sudo or su depending on how you have things set up) in order to get the ram info?
|
Yes, I'm root :
inxi -zv7
System: Host: Mahbackup Kernel: 3.10.0-123.13.2.el7.x86_64 x86_64 (64 bit gcc: 4.8.2)
Console: tty 0 dm: gdm Distro: CentOS Linux release 7.0.1406 (Core)
Machine: System: HP product: ProLiant DL380 G7 Chassis: type: 23
Mobo: N/A model: N/A Bios: HP v: P67 date: 05/05/2011
CPU(s): 2 Quad core Intel Xeon E5620s (-HT-MCP-SMP-) cache: 24576 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 38389
clock speeds: min/max: 1600/2400 MHz 1: 1600 MHz 2: 1600 MHz
3: 1600 MHz 4: 1600 MHz 5: 2400 MHz 6: 1600 MHz 7: 1600 MHz
8: 1600 MHz 9: 1600 MHz 10: 1600 MHz 11: 1600 MHz 12: 1600 MHz
13: 2400 MHz 14: 1600 MHz 15: 1600 MHz 16: 1600 MHz
Memory: Array-1 capacity: 192 GB devices: 9 EC: Single-bit ECC
Device-1: PROC 1 DIMM 1G size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-2: PROC 1 DIMM 2D size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-3: PROC 1 DIMM 3A size: 8 GB speed: 1066 MHz
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
manufacturer: N/A part: N/A serial: N/A
Device-4: PROC 1 DIMM 4H size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-5: PROC 1 DIMM 5E size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-6: PROC 1 DIMM 6B size: 8 GB speed: 1066 MHz
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
manufacturer: N/A part: N/A serial: N/A
Device-7: PROC 1 DIMM 7I size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-8: PROC 1 DIMM 8F size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-9: PROC 1 DIMM 9C size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-10: PROC 2 DIMM 1G size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-11: PROC 2 DIMM 2D size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-12: PROC 2 DIMM 3A size: 8 GB speed: 1066 MHz
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
manufacturer: N/A part: N/A serial: N/A
Device-13: PROC 2 DIMM 4H size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-14: PROC 2 DIMM 5E size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-15: PROC 2 DIMM 6B size: 8 GB speed: 1066 MHz
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
manufacturer: N/A part: N/A serial: N/A
Device-16: PROC 2 DIMM 7I size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-17: PROC 2 DIMM 8F size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Device-18: PROC 2 DIMM 9C size: No Module Installed
type: DDR3 (Synchronous) bus width: 64 bits (total: 72 bits)
Graphics: Card: Advanced Micro Devices [AMD/ATI] ES1000
bus-ID: 01:03.0 chip-ID: 1002:515e
Display Server: X.org 1.15.0 drivers: ati,radeon (unloaded: fbdev,vesa)
tty size: 80x24 Advanced Data: N/A for root out of X
Network: Card-1: Broadcom NetXtreme II BCM5709 Gigabit Ethernet
driver: bnx2 v: 2.2.5 bus-ID: 03:00.0 chip-ID: 14e4:1639
IF: enp3s0f0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Broadcom NetXtreme II BCM5709 Gigabit Ethernet
driver: bnx2 v: 2.2.5 bus-ID: 03:00.1 chip-ID: 14e4:1639
IF: enp3s0f1 state: down mac: <filter>
Card-3: Broadcom NetXtreme II BCM5709 Gigabit Ethernet
driver: bnx2 v: 2.2.5 bus-ID: 04:00.0 chip-ID: 14e4:1639
IF: enp4s0f0 state: down mac: <filter>
Card-4: Broadcom NetXtreme II BCM5709 Gigabit Ethernet
driver: bnx2 v: 2.2.5 bus-ID: 04:00.1 chip-ID: 14e4:1639
IF: enp4s0f1 state: down mac: <filter>
WAN IP: <filter> IF: enp4s0f0 ip: N/A ip-v6: N/A
IF: enp4s0f1 ip: N/A ip-v6: N/A
IF: enp3s0f0 ip: <filter> ip-v6: <filter>
IF: enp3s0f1 ip: N/A ip-v6: N/A
Drives: HDD Total Size: 6983.3GB (66.8% used)
ID-1: /dev/sda model: LOGICAL_VOLUME size: 107.4GB serial: scsi-3600508b1001cf1647f1a7dbce8246b43 temp: 0C
ID-2: /dev/sdb model: LOGICAL_VOLUME size: 6875.9GB serial: scsi-3600508b1001c35460678324eceb2d89e temp: 0C
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GT50N
rev: LC01 dev-links: cdrom
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 91G used: 4.5G (6%) fs: ext4 dev: /dev/sda3
label: N/A uuid: e00a8f93-ea60-45e6-9946-ee169a6e37dc
ID-2: /boot size: 190M used: 134M (77%) fs: ext4 dev: /dev/sda1
label: N/A uuid: f4239242-ad08-4a89-9645-39e4e19a1cfe
ID-3: /mnt/backup size: 6.2T used: 4.3T (73%) fs: ext4 dev: /dev/sdb
label: N/A uuid: d31526b6-0bd2-480e-b975-ea9ffbe83135
ID-4: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
label: N/A uuid: 0e6f9773-9b59-4ccf-9527-812b6567a2a3
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: System Temperatures: cpu: 32.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 357 Uptime: 3 days Memory: 1666.7/32002.5MB
Init: systemd v: 208 runlevel: 5 default: graphical.target
Gcc sys: N/A
Client: Shell (bash 4.2.451 running in tty 0) inxi: 2.2.16
How about my RAM Slots?