Slackware installer does not see external hard-drive.
I have found one thread similar to my problem, but it has two posts made 6 1/2 years ago. I want to try Slackware by installing it on an external hard-drive, but both fdisk and cfdisk only show my internal hard-drive. I have installed and tested two other operating systems on the drive without any problems. Does the Slackware installation programme only allow installation on internal hardware or am I simply hopeless at figuring out how to use the partitioning tools? I have installed Slackware once, in a very brief look at the system. (long story) So I can use cfdisk a little and there is nothing wrong with my DVD.
Running dmesg lists internal hardware like internet equipment, etc., but I do not see anything that looks like an external drive. I am itching to give Slack a run, but I do not want to over-write my Debian system first. Just in case. As already stated, I know it can be easily done with other systems. (At least with the ones I have done it with.) I hope it can also be done with Slackware, and I see no reason why it should not be. |
Hi, You are not exactly providing a lot of info but i'll give it a try....
I'm guessing it is a usb external drive you are using right? you can try the lsusb command to check if it is visible to the system. Alternatively fdisk -l could provide you with the correct block device for the external drive. Maybe if you post the outbut of both commands we can help a bit more. |
Yes. It is a 120GB portable hard-drive, connected by a USB. I just installed Debian onto it as a back-up and had no problems what-so-ever. I shall try those two commands to see if they work, but it may now be a moot point. When I installed Debian on the drive, I was at the end of a day with only three hours sleep and accidentally installed grub on the external drive. Now I need it plugged in to boot my computer. I now have incentive to put Slackware on the internal drive, instead of trying to repair the mess I just created.
Edit fdisk -l did the trick. It displays the external device and all the information concerning existing partitions. Thank you. That command is simple and effective. |
Glad to be of Help
|
All times are GMT -5. The time now is 07:38 PM. |