| shelldweller |
08-18-2022 06:14 PM |
I picked up one of these at a good price, planning on making a music box out of it, among other things.
I built a legacy image, no problems. Can't test it until my board arrives, but the image built without errors.
I went to build a next image, and I got this vague error during the kernel build section:
Code:
CC [M] drivers/hid/hid-zpff.o
CC [M] drivers/hid/hid-zydacron.o
CC [M] drivers/iio/light/lm3533-als.o
CC [M] drivers/iio/magnetometer/yamaha-yas530.o
LD [M] drivers/iio/magnetometer/st_magn.o
CC [M] drivers/iio/light/ltr501.o
CC [M] drivers/hid/hid-viewsonic.o
CC [M] drivers/iio/temperature/mlx90632.o
CC [M] drivers/hid/wacom_wac.o
CC [M] drivers/iio/light/lv0104cs.o
CC [M] drivers/hid/wacom_sys.o
CC [M] drivers/hid/hid-waltop.o
CC [M] drivers/iio/light/max44000.o
CC [M] drivers/iio/temperature/tmp006.o
CC [M] drivers/iio/light/max44009.o
CC [M] drivers/hid/hid-wiimote-core.o
CC [M] drivers/iio/light/noa1305.o
CC [M] drivers/iio/temperature/tmp007.o
CC [M] drivers/iio/light/opt3001.o
CC [M] drivers/hid/hid-wiimote-modules.o
CC [M] drivers/hid/hid-wiimote-debug.o
CC [M] drivers/iio/light/pa12203001.o
CC [M] drivers/hid/hid-sensor-hub.o
CC [M] drivers/iio/temperature/tmp117.o
CC [M] drivers/iio/light/rpr0521.o
CC [M] drivers/hid/hid-sensor-custom.o
CC [M] drivers/iio/light/tsl2563.o
CC [M] drivers/iio/temperature/tsys01.o
LD [M] drivers/hid/hid-logitech.o
LD [M] drivers/hid/hid-picolcd.o
LD [M] drivers/hid/hid-uclogic.o
LD [M] drivers/hid/wacom.o
AR drivers/hid/built-in.a
CC [M] drivers/iio/light/si1133.o
CC [M] drivers/iio/light/si1145.o
CC [M] drivers/iio/light/stk3310.o
CC [M] drivers/iio/temperature/tsys02d.o
CC [M] drivers/iio/light/st_uvis25_core.o
CC [M] drivers/iio/light/st_uvis25_i2c.o
LD [M] drivers/hid/hid-wiimote.o
CC [M] drivers/iio/light/st_uvis25_spi.o
CC [M] drivers/iio/light/tcs3414.o
CC [M] drivers/iio/light/tcs3472.o
CC [M] drivers/iio/light/tsl2583.o
CC [M] drivers/iio/light/tsl2591.o
CC [M] drivers/iio/light/tsl2772.o
CC [M] drivers/iio/light/tsl4531.o
CC [M] drivers/iio/light/us5182d.o
CC [M] drivers/iio/light/vcnl4000.o
CC [M] drivers/iio/light/vcnl4035.o
CC [M] drivers/iio/light/veml6030.o
CC [M] drivers/iio/light/veml6070.o
CC [M] drivers/iio/light/vl6180.o
CC [M] drivers/iio/light/zopt2201.o
AR drivers/iio/built-in.a
make: *** [Makefile:1844: drivers] Error 2
It's not urgent at all, since I am still waiting for the board to arrive. I just wanted to see if I could build an image while I was waiting. Then I ran into this, and just thought I should report it here.
Thanks much, hope you're well, as always... |
