wowbaggerHU |
07-27-2022 07:16 AM |
Quote:
Originally Posted by sndwvs
(Post 6370054)
for more information change in uEnv.txt verbosity=8
|
Okay, I did just that:
Code:
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.18.12 (root@firefly-rk3399) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT Fri Jul 15 15:32:11 EEST 2022
[ 0.000000] Machine model: Pine64 Pinebook Pro
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] efi: UEFI not found.
--- had to trim the output a bit to get below the 30000 char threshold ---
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000000004d0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002900] Console: colour dummy device 80x25
[ 0.003337] printk: console [tty1] enabled
[ 0.003737] printk: bootconsole [uart8250] disabled
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.18.12 (root@firefly-rk3399) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT Fri Jul 15 15:32:11 EEST 2022
[ 0.000000] Machine model: Pine64 Pinebook Pro
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xf77ca040-0xf77cbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] cma: Reserved 128 MiB at 0x00000000e8400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 29 pages/cpu s81704 r8192 d28888 u118784
[ 0.000000] pcpu-alloc: s81704 r8192 d28888 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/mmcblk2p2 ro rootwait rootfstype=f2fs init=/sbin/init console=ttyS2,1500000n8 console=tty1 consoleblank=0 loglevel=8 usb-storage.quirks= earlycon=uart8250,mmio32,0xff1a0000
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 3809832K/4061184K available (15680K kernel code, 2702K rwdata, 6108K rodata, 4352K init, 508K bss, 120280K reserved, 131072K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000000004d0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002900] Console: colour dummy device 80x25
[ 0.003337] printk: console [tty1] enabled
[ 0.003737] printk: bootconsole [uart8250] disabled
[ 0.004311] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.004354] pid_max: default: 32768 minimum: 301
[ 0.004491] LSM: Security Framework initializing
[ 0.004549] Yama: becoming mindful.
[ 0.004693] AppArmor: AppArmor initialized
[ 0.004855] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.004908] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.008148] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.008194] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.008377] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.008558] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.008939] rcu: Hierarchical SRCU implementation.
[ 0.010103] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.010661] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.013003] EFI services will not be available.
[ 0.013851] smp: Bringing up secondary CPUs ...
[ 0.014956] Detected VIPT I-cache on CPU1
[ 0.015007] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.015030] GICv3: CPU1: using allocated LPI pending table @0x00000000004f0000
[ 0.015101] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.016257] Detected VIPT I-cache on CPU2
[ 0.016297] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.016317] GICv3: CPU2: using allocated LPI pending table @0x0000000000580000
[ 0.016365] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.017471] Detected VIPT I-cache on CPU3
[ 0.017510] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.017530] GICv3: CPU3: using allocated LPI pending table @0x0000000000590000
[ 0.017575] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.018681] CPU features: detected: Spectre-v2
[ 0.018698] CPU features: detected: Spectre-BHB
[ 0.018711] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.018717] Detected PIPT I-cache on CPU4
[ 0.018753] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.018772] GICv3: CPU4: using allocated LPI pending table @0x00000000005a0000
[ 0.018818] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.019985] Detected PIPT I-cache on CPU5
[ 0.020019] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.020037] GICv3: CPU5: using allocated LPI pending table @0x00000000005b0000
[ 0.020075] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.020227] smp: Brought up 1 node, 6 CPUs
[ 0.020621] SMP: Total of 6 processors activated.
[ 0.020644] CPU features: detected: 32-bit EL0 Support
[ 0.020665] CPU features: detected: 32-bit EL1 Support
[ 0.020689] CPU features: detected: CRC32 instructions
[ 0.022193] CPU: All CPU(s) started at EL2
[ 0.022275] alternatives: patching kernel code
[ 0.025347] devtmpfs: initialized
[ 0.040774] Registered cp15_barrier emulation handler
[ 0.040819] Registered setend emulation handler
[ 0.041042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.041108] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.044137] pinctrl core: initialized pinctrl subsystem
[ 0.044800] DMI not present or invalid.
[ 0.045592] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.049548] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.050965] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.053112] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.053210] audit: initializing netlink subsys (disabled)
[ 0.053485] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[ 0.054759] thermal_sys: Registered thermal governor 'fair_share'
[ 0.054769] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.054789] thermal_sys: Registered thermal governor 'step_wise'
[ 0.054803] thermal_sys: Registered thermal governor 'user_space'
[ 0.055336] cpuidle: using governor menu
[ 0.055590] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.055828] ASID allocator initialised with 65536 entries
[ 0.057087] Serial: AMBA PL011 UART driver
[ 0.086287] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc
[ 0.093067] platform ff970000.edp: Fixing up cyclic dependency with ff8f0000.vop
[ 0.093157] platform ff970000.edp: Fixing up cyclic dependency with ff900000.vop
[ 0.104127] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[ 0.104962] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[ 0.105829] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[ 0.106639] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[ 0.107375] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[ 0.109185] platform edp-panel: Fixing up cyclic dependency with ff970000.edp
[ 0.132683] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.132715] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.132734] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.132751] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.133684] cryptd: max_cpu_qlen set to 1000
[ 0.199545] raid6: neonx8 gen() 1666 MB/s
[ 0.267725] raid6: neonx4 gen() 1727 MB/s
[ 0.335902] raid6: neonx2 gen() 1480 MB/s
[ 0.404042] raid6: neonx1 gen() 1178 MB/s
[ 0.472206] raid6: int64x8 gen() 913 MB/s
[ 0.540350] raid6: int64x4 gen() 1023 MB/s
[ 0.608514] raid6: int64x2 gen() 961 MB/s
[ 0.676666] raid6: int64x1 gen() 732 MB/s
[ 0.676681] raid6: using algorithm neonx4 gen() 1727 MB/s
[ 0.744816] raid6: .... xor() 1214 MB/s, rmw enabled
[ 0.744833] raid6: using neon recovery algorithm
[ 0.859024] iommu: Default domain type: Translated
[ 0.859054] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.859548] SCSI subsystem initialized
[ 0.859821] libata version 3.00 loaded.
[ 0.860120] usbcore: registered new interface driver usbfs
[ 0.860177] usbcore: registered new interface driver hub
[ 0.860238] usbcore: registered new device driver usb
[ 0.860860] pps_core: LinuxPPS API ver. 1 registered
[ 0.860877] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.860906] PTP clock support registered
[ 0.861241] EDAC MC: Ver: 3.0.0
[ 0.862531] NetLabel: Initializing
[ 0.862550] NetLabel: domain hash size = 128
[ 0.862564] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.862643] NetLabel: unlabeled traffic allowed by default
[ 0.862800] vgaarb: loaded
[ 0.863292] clocksource: Switched to clocksource arch_sys_counter
[ 0.919929] VFS: Disk quotas dquot_6.6.0
[ 0.920021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.920914] AppArmor: AppArmor Filesystem Enabled
[ 0.931363] NET: Registered PF_INET protocol family
[ 0.931670] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.934739] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.934954] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.935047] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.935546] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.936228] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.936392] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.936559] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.936919] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.936966] NET: Registered PF_XDP protocol family
[ 0.936988] PCI: CLS 0 bytes, default 64
[ 0.937659] Trying to unpack rootfs image as initramfs...
[ 0.938224] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.938758] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.939677] kvm [1]: IPA Size Limit: 40 bits
[ 0.941080] kvm [1]: vgic-v2@fff20000
[ 0.941125] kvm [1]: GIC system register CPU interface enabled
[ 0.941414] kvm [1]: vgic interrupt IRQ18
[ 0.941729] kvm [1]: Hyp mode initialized successfully
[ 0.944189] Initialise system trusted keyrings
[ 0.944261] Key type blacklist registered
[ 0.944624] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.951490] zbud: loaded
[ 0.953495] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.954475] fuse: init (API version 7.36)
[ 0.956107] integrity: Platform Keyring initialized
[ 1.022668] xor: measuring software checksum speed
[ 1.026077] 8regs : 2926 MB/sec
[ 1.029229] 32regs : 3149 MB/sec
[ 1.033524] arm64_neon : 2304 MB/sec
[ 1.033540] xor: using function: 32regs (3149 MB/sec)
[ 1.033562] Key type asymmetric registered
[ 1.033575] Asymmetric key parser 'x509' registered
[ 1.813689] Freeing initrd memory: 11876K
[ 1.836331] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 1.836448] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.836679] io scheduler mq-deadline registered
[ 1.836699] io scheduler kyber registered
[ 1.836862] io scheduler bfq registered
[ 1.875872] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.875928] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 1.878490] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.878532] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.944020] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.947731] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 41, base_baud = 1500000) is a 16550A
[ 1.947947] serial serial0: tty port ttyS0 registered
[ 1.949577] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 42, base_baud = 1500000) is a 16550A
[ 2.067046] printk: console [ttyS2] enabled
[ 2.068963] Serial: AMBA driver
[ 2.073682] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.083117] loop: module loaded
[ 2.088704] tun: Universal TUN/TAP device driver, 1.6
[ 2.090297] thunder_xcv, ver 1.0
[ 2.090650] thunder_bgx, ver 1.0
[ 2.090985] nicpf, ver 1.0
[ 2.092381] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.092830] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.093400] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.093884] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.094414] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 2.094974] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.095806] sky2: driver version 1.30
[ 2.096822] VFIO - User Level meta-driver version: 0.3
[ 2.108157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.108769] ehci-pci: EHCI PCI platform driver
[ 2.109206] ehci-platform: EHCI generic platform driver
[ 2.112083] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 2.112618] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 2.113476] ehci-platform fe3c0000.usb: irq 36, io mem 0xfe3c0000
[ 2.127324] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 2.128133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 2.128879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.129527] usb usb1: Product: EHCI Host Controller
[ 2.129968] usb usb1: Manufacturer: Linux 5.18.12 ehci_hcd
[ 2.130461] usb usb1: SerialNumber: fe3c0000.usb
[ 2.131427] hub 1-0:1.0: USB hub found
[ 2.131809] hub 1-0:1.0: 1 port detected
[ 2.132886] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.133464] ohci-pci: OHCI PCI platform driver
[ 2.133915] ohci-platform: OHCI generic platform driver
[ 2.134719] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 2.135359] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 2.136174] ohci-platform fe3e0000.usb: irq 37, io mem 0xfe3e0000
[ 2.199520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18
[ 2.200266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.200915] usb usb2: Product: Generic Platform OHCI controller
[ 2.201445] usb usb2: Manufacturer: Linux 5.18.12 ohci_hcd
[ 2.201937] usb usb2: SerialNumber: fe3e0000.usb
[ 2.202847] hub 2-0:1.0: USB hub found
[ 2.203225] hub 2-0:1.0: 1 port detected
[ 2.205077] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.205593] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[ 2.206427] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010
[ 2.207348] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0xfe900000
[ 2.208124] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.208626] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[ 2.209318] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.210081] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 2.210827] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.211615] usb usb3: Product: xHCI Host Controller
[ 2.212059] usb usb3: Manufacturer: Linux 5.18.12 xhci-hcd
[ 2.212552] usb usb3: SerialNumber: xhci-hcd.0.auto
[ 2.213499] hub 3-0:1.0: USB hub found
[ 2.213879] hub 3-0:1.0: 1 port detected
[ 2.214648] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.215531] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 2.216274] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.216921] usb usb4: Product: xHCI Host Controller
[ 2.217360] usb usb4: Manufacturer: Linux 5.18.12 xhci-hcd
[ 2.217852] usb usb4: SerialNumber: xhci-hcd.0.auto
[ 2.218766] hub 4-0:1.0: USB hub found
[ 2.219143] hub 4-0:1.0: 1 port detected
[ 2.220010] usbcore: registered new interface driver usb-storage
[ 2.223116] mousedev: PS/2 mouse device common for all mice
[ 2.225047] i2c_dev: i2c /dev entries driver
[ 2.229897] rk808 0-001b: chip id: 0x0
[ 2.234961] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 2.235716] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 2.236277] rk808-regulator rk808-regulator: max buck steps per change: 8
[ 2.251358] rk808-rtc rk808-rtc: registered as rtc0
[ 2.252356] rk808-rtc rk808-rtc: setting system clock to 2022-07-27T14:04:37 UTC (1658930677)
[ 2.254820] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 2.258908] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 2.268272] dw_wdt ff848000.watchdog: No valid TOPs array specified
[ 2.271123] sdhci: Secure Digital Host Controller Interface driver
[ 2.271714] sdhci: Copyright(c) Pierre Ossman
[ 2.272134] Synopsys Designware Multimedia Card Interface Driver
[ 2.274303] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.274874] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 2.275199] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 2.275561] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 2.276224] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 2.276789] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 2.277388] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 2.277932] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[ 2.278513] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[ 2.279263] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.279762] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 2.280586] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[ 2.281633] mmc_host mmc0: card is non-removable.
[ 2.281803] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 2.282969] hid: raw HID events driver (C) Jiri Kosina
[ 2.283599] usbcore: registered new interface driver usbhid
[ 2.284103] usbhid: USB HID core driver
[ 2.285200] fusb302 4-0022: Can't get property of role, set role to default DRP
[ 2.292548] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.294141] fusb302 4-0022: Unable to request IRQ for INT_N GPIO! 0
[ 2.295020] fusb302: probe of 4-0022 failed with error -22
[ 2.301244] drop_monitor: Initializing network drop monitor service
[ 2.302555] NET: Registered PF_INET6 protocol family
[ 2.324654] Segment Routing with IPv6
[ 2.325055] In-situ OAM (IOAM) with IPv6
[ 2.325495] NET: Registered PF_PACKET protocol family
[ 2.326140] 8021q: 802.1Q VLAN Support v1.8
[ 2.326593] Key type dns_resolver registered
[ 2.328870] registered taskstats version 1
[ 2.329256] Loading compiled-in X.509 certificates
[ 2.333507] Loaded X.509 cert 'Build time autogenerated kernel key: 4064e6bd5fa14d661a17d7d6c4c05813f5a30a23'
[ 2.335678] zswap: loaded using pool lzo/zbud
[ 2.336745] Key type ._fscrypt registered
[ 2.337112] Key type .fscrypt registered
[ 2.337466] Key type fscrypt-provisioning registered
[ 2.340234] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[ 2.341233] Key type encrypted registered
[ 2.341617] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.387348] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 2.399409] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.417901] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 2.418615] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 2.419549] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 2.421344] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 2.461550] rockchip-pcie f8000000.pcie: wait 1000 ms (from device tree) before bus scan
[ 2.511056] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 2.545075] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[ 2.545824] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.546464] usb 1-1: Product: USB2.0 Hub
[ 2.547722] hub 1-1:1.0: USB hub found
[ 2.548450] hub 1-1:1.0: 4 ports detected
[ 2.835334] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
[ 2.992943] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[ 2.993698] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.994353] usb 1-1.2: Product: USB Camera
[ 2.994725] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
[ 3.156353] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 52
[ 3.162831] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 3.487864] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[ 3.488479] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 3.488990] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[ 3.489622] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[ 3.490542] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[ 3.491269] pci 0000:00:00.0: supports D1
[ 3.491672] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 3.499879] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.500913] pci 0000:01:00.0: [15b7:5009] type 00 class 0x010802
[ 3.501562] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 3.502298] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit]
[ 3.502983] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
[ 3.504266] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 3.522408] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[ 3.523063] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[ 3.523732] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64bit]
[ 3.524452] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa004000-0xfa0040ff 64bit]
[ 3.525165] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.525631] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 3.526555] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 3.527632] pcieport 0000:00:00.0: PME: Signaling with IRQ 89
[ 3.528738] pcieport 0000:00:00.0: AER: enabled with IRQ 89
[ 3.530084] nvme nvme0: pci function 0000:01:00.0
[ 3.530589] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 3.539723] WCN: marlin_init entry!
[ 3.541344] input: gpio-key-lid as /devices/platform/gpio-key-lid/input/input0
[ 3.543115] input: gpio-key-power as /devices/platform/gpio-key-power/input/input1
[ 3.564496] nvme nvme0: allocated 32 MiB host memory buffer.
[ 3.569421] nvme nvme0: 6/0/0 default/read/poll queues
[ 3.577864] nvme0n1: p1
[ 3.581539] Freeing unused kernel memory: 4352K
[ 3.599456] Run /init as init process
[ 3.599795] with arguments:
[ 3.600067] /init
[ 3.600279] with environment:
[ 3.600563] HOME=/
[ 3.600781] TERM=linux
[ 5.671307] random: crng init done
[ 5.701265] udevd[256]: starting eudev-3.2.11
[ 6.000011] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 6.024028] device-mapper: uevent: version 1.0.3
[ 6.025013] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
And after that it just hangs there.
I will try to start up a console on the serial port.
|