Nood here, ive been trying to create a self hosted file saver but i keep running into one error or another when dealing with external storage on a Raspberry Pi 4 (2gb). My current issue is an inability to see the external ssd when i run the command sudo fdisk -l
mount -a
returns:
mount: /mnt/sdd: must be superuser to use mount.
dmesg(1) may have more information after failed mount system call.
dmesg
returns:
Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.6.20+rpt-rpi-v8 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07)
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000000e400000, size 512 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000000e400000..0x000000002e3fffff (524288 KiB) map reusable linux,cma
...
[ 1.198518] io scheduler mq-deadline registered
[ 1.198544] io scheduler kyber registered
[ 1.198594] io scheduler bfq registered
[ 1.203481] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 23)
[ 1.209091] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.209154] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.209210] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.209259] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[ 1.210463] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.210517] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.210542] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.210654] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.210762] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.214357] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.214586] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 1.214815] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 1.214895] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 1.324768] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.324974] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.325080] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.325452] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.334783] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.334868] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.334897] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.334968] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.334989] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.335339] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.335524] pcieport 0000:00:00.0: PME: Signaling with IRQ 27
[ 1.335935] pcieport 0000:00:00.0: AER: enabled with IRQ 27
[ 1.346183] iproc-rng200 fe104000.rng: hwrng registered
[ 1.346515] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.359062] brd: module loaded
[ 1.366016] loop: module loaded
[ 1.366744] Loading iSCSI transport class v2.0-870.
[ 1.371137] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.718856] Freeing initrd memory: 10832K
[ 1.890692] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.891748] usbcore: registered new device driver r8152-cfgselector
[ 1.891801] usbcore: registered new interface driver r8152
[ 1.891860] usbcore: registered new interface driver lan78xx
[ 1.891903] usbcore: registered new interface driver smsc95xx
[ 1.939364] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.939406] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.941211] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0700240000000890
[ 1.941966] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.941995] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.942025] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.942268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 1.942298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.942321] usb usb1: Product: xHCI Host Controller
[ 1.942338] usb usb1: Manufacturer: Linux 6.6.20+rpt-rpi-v8 xhci-hcd
[ 1.942355] usb usb1: SerialNumber: 0000:01:00.0
[ 1.942951] hub 1-0:1.0: USB hub found
[ 1.943004] hub 1-0:1.0: 1 port detected
[ 1.943577] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 1.943607] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.943629] usb usb2: Product: xHCI Host Controller
[ 1.943646] usb usb2: Manufacturer: Linux 6.6.20+rpt-rpi-v8 xhci-hcd
[ 1.943663] usb usb2: SerialNumber: 0000:01:00.0
[ 1.944126] hub 2-0:1.0: USB hub found
[ 1.944181] hub 2-0:1.0: 4 ports detected
[ 1.945093] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.945209] dwc_otg: FIQ enabled
[ 1.945216] dwc_otg: NAK holdoff enabled
[ 1.945222] dwc_otg: FIQ split-transaction FSM enabled
[ 1.945231] Module dwc_common_port init
[ 1.945878] usbcore: registered new interface driver uas
[ 1.945957] usbcore: registered new interface driver usb-storage
[ 1.946390] mousedev: PS/2 mouse device common for all mice
[ 1.949852] sdhci: Secure Digital Host Controller Interface driver
[ 1.949883] sdhci: Copyright(c) Pierre Ossman
[ 1.950113] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.956357] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.956642] hid: raw HID events driver (C) Jiri Kosina
[ 1.956784] usbcore: registered new interface driver usbhid
[ 1.956804] usbhid: USB HID core driver
[ 1.962135] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.962722] NET: Registered PF_PACKET protocol family
[ 1.962813] Key type dns_resolver registered
[ 1.986480] registered taskstats version 1
[ 1.986792] Loading compiled-in X.509 certificates
[ 1.996041] Key type .fscrypt registered
[ 1.996079] Key type fscrypt-provisioning registered
[ 2.002863] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 2.003293] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 2.003657] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ 2.003910] serial serial0: tty port ttyAMA1 registered
[ 2.007074] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.007355] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.008313] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 2.008345] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 2.032887] of_cfs_init
[ 2.033014] of_cfs_init: OK
[ 2.033229] clk: Disabling unused clocks
[ 2.069385] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 2.079437] Freeing unused kernel memory: 4864K
[ 2.079666] Run /init as init process
[ 2.079681] with arguments:
[ 2.079686] /init
[ 2.079692] with environment:
[ 2.079697] HOME=/
[ 2.079702] TERM=linux
[ 2.114972] mmc1: new high speed SDIO card at address 0001
[ 2.170380] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 2.171439] mmcblk0: mmc0:aaaa SB32G 29.7 GiB
[ 2.175070] mmcblk0: p1 p2
[ 2.178723] mmcblk0: mmc0:aaaa SB32G 29.7 GiB (quirks 0x00004000)
[ 2.198757] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.349539] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 2.349602] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.349626] usb 1-1: Product: USB2.0 Hub
[ 2.368260] hub 1-1:1.0: USB hub found
[ 2.368555] hub 1-1:1.0: 4 ports detected
[ 2.612182] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 2.612600] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 2.662689] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[ 2.767603] usb 1-1.3: New USB device found, idVendor=0406, idProduct=620b, bcdDevice= 1.00
[ 2.767661] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.767687] usb 1-1.3: Product: USB Composite Device
[ 2.767706] usb 1-1.3: Manufacturer: XING WEI 2.4G USB
[ 2.777992] input: XING WEI 2.4G USB USB Composite Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:0406:620B.0001/input/input0
[ 2.835444] hid-generic 0003:0406:620B.0001: input,hidraw0: USB HID v1.10 Keyboard [XING WEI 2.4G USB USB Composite Device] on usb-0000:01:00.0-1.3/input2
[ 2.840316] input: XING WEI 2.4G USB USB Composite Device Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:0406:620B.0002/input/input1
[ 2.840819] input: XING WEI 2.4G USB USB Composite Device Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:0406:620B.0002/input/input2
[ 2.898903] input: XING WEI 2.4G USB USB Composite Device System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:0406:620B.0002/input/input3
[ 2.899208] hid-generic 0003:0406:620B.0002: input,hidraw1: USB HID v1.10 Mouse [XING WEI 2.4G USB USB Composite Device] on usb-0000:01:00.0-1.3/input3
[ 3.665352] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[ 4.143557] systemd[1]: System time before build time, advancing clock.
[ 4.309109] NET: Registered PF_INET6 protocol family
[ 4.310421] Segment Routing with IPv6
[ 4.310469] In-situ OAM (IOAM) with IPv6
[ 4.380241] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.380330] systemd[1]: Detected architecture arm64.
[ 4.384788] systemd[1]: Hostname set to <raspberrypi>.
[ 5.097760] systemd[1]: Queued start job for default target multi-user.target.
[ 5.127448] systemd[1]: Created slice system-devmon.slice - Slice /system/devmon.
[ 5.130034] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 5.132304] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 5.134566] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 5.136328] systemd[1]: Created slice user.slice - User and Session Slice.
[ 5.136997] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 5.137493] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 5.138484] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 5.138911] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-333f7c01\x2d01.device - /dev/disk/by-partuuid/333f7c01-01...
[ 5.139166] systemd[1]: Expecting device dev-disk-by\x2duuid-d3145198\x2d6a79\x2d4d0f\x2dbdac\x2daac8bb46ae37.device - /dev/disk/by-uuid/d3145198-6a79-4d0f-bdac-aac8bb46ae37...
[ 5.139441] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 5.139748] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 5.140118] systemd[1]: Reached target paths.target - Path Units.
[ 5.140485] systemd[1]: Reached target slices.target - Slice Units.
[ 5.140784] systemd[1]: Reached target swap.target - Swaps.
[ 5.141101] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 5.141979] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 5.142511] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 5.143918] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 5.144780] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 5.145654] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 5.149164] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 5.149985] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 5.150946] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 5.170990] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 5.176418] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 5.182254] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 5.183478] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 5.190121] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 5.196192] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 5.203328] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 5.209351] systemd[1]: Starting
modprobe@configfs.service - Load Kernel Module configfs...
[ 5.216196] systemd[1]: Starting
modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 5.222529] systemd[1]: Starting
modprobe@drm.service - Load Kernel Module drm...
[ 5.229605] systemd[1]: Starting
modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 5.236657] systemd[1]: Starting
modprobe@fuse.service - Load Kernel Module fuse...
[ 5.243373] systemd[1]: Starting
modprobe@loop.service - Load Kernel Module loop...
[ 5.245193] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 5.258546] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 5.285383] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 5.289377] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised:
dm-devel@redhat.com
[ 5.294527] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 5.300701] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 5.310757] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 5.315001] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 5.315908] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 5.317675] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 5.320514] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 5.322421] systemd[1]:
modprobe@configfs.service: Deactivated successfully.
[ 5.323681] systemd[1]: Finished
modprobe@configfs.service - Load Kernel Module configfs.
[ 5.325524] systemd[1]:
modprobe@dm_mod.service: Deactivated successfully.
[ 5.326521] systemd[1]: Finished
modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 5.329084] systemd[1]:
modprobe@efi_pstore.service: Deactivated successfully.
[ 5.330038] systemd[1]: Finished
modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 5.332625] systemd[1]:
modprobe@loop.service: Deactivated successfully.
[ 5.333541] systemd[1]: Finished
modprobe@loop.service - Load Kernel Module loop.
[ 5.381856] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 5.382648] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 5.385763] fuse: init (API version 7.39)
[ 5.387964] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 5.395547] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 5.411271] systemd[1]:
modprobe@fuse.service: Deactivated successfully.
[ 5.413484] systemd[1]: Finished
modprobe@fuse.service - Load Kernel Module fuse.
[ 5.418911] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 5.422724] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.
[ 5.435460] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 5.443294] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 5.444223] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.444505] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 5.450383] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 5.457739] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 5.462412] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 5.500051] systemd[1]:
modprobe@drm.service: Deactivated successfully.
[ 5.502857] systemd[1]: Finished
modprobe@drm.service - Load Kernel Module drm.
[ 5.505151] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 5.534856] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 5.537574] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.554097] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 5.583431] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 5.589996] systemd[1]: Started systemd-journald.service - Journal Service.
[ 5.641031] systemd-journald[232]: Received client request to flush runtime journal.
[ 7.785335] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 7.902936] uart-pl011 fe201000.serial: no DMA platform data
[ 7.977042] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 7.982897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.983726] usbcore: registered new interface driver brcmfmac
[ 8.143526] Bluetooth: hci0: BCM: chip id 107
[ 8.143939] Bluetooth: hci0: BCM: features 0x2f
[ 8.145287] Bluetooth: hci0: BCM4345C0
[ 8.145342] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 8.158425] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,4-model-b.hcd' Patch
[ 8.305653] brcmfmac_wcc: brcmf_wcc_attach: executing
[ 8.316034] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 8.317786] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 8.615405] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS
[ 8.982745] Bluetooth: hci0: BCM: features 0x2f
[ 8.984149] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 8.984175] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 10.538887] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.538905] Bluetooth: BNEP filters: protocol multicast
[ 10.538917] Bluetooth: BNEP socket layer initialized
[ 10.544296] Bluetooth: MGMT ver 1.22
[ 10.558433] NET: Registered PF_ALG protocol family
[ 10.743965] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 10.744647] bcmgenet fd580000.ethernet eth0: Link is Down
[ 10.781554] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 14.851218] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 22.862573] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 22.869550] Bridge firewalling registered
[ 23.077049] Initializing XFRM netlink socket
[ 24.251969] docker0: port 1(vethe6d7751) entered blocking state
[ 24.251986] docker0: port 1(vethe6d7751) entered disabled state
[ 24.252015] vethe6d7751: entered allmulticast mode
[ 24.252121] vethe6d7751: entered promiscuous mode
[ 24.907437] eth0: renamed from veth09d0c84
[ 24.935622] docker0: port 1(vethe6d7751) entered blocking state
[ 24.935641] docker0: port 1(vethe6d7751) entered forwarding state
[ 2200.055628] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2200.076973] usb 2-2: New USB device found, idVendor=174c, idProduct=225c, bcdDevice= 0.01
[ 2200.076989] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2200.076997] usb 2-2: Product: AS2235
[ 2200.077004] usb 2-2: Manufacturer: ASMedia
[ 2200.077010] usb 2-2: SerialNumber: 00000000000000000000
[ 2200.085844] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2200.086307] scsi host0: usb-storage 2-2:1.0
[ 2201.099849] scsi 0:0:0:0: Direct-Access ASMT 2235 0 PQ: 0 ANSI: 6
[ 2201.102009] sd 0:0:0:0: [sda] Spinning up disk...
[ 2201.111358] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2202.123233] ..ready
[ 2203.147953] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2203.148487] sd 0:0:0:0: [sda] Write Protect is off
[ 2203.148493] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2203.149021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2203.158798] sda: sda1
[ 2203.159129] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2208.107364] usb 2-2: USB disconnect, device number 2
[ 2208.171336] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2208.171493] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK
[ 2211.415639] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 2211.437008] usb 2-2: New USB device found, idVendor=174c, idProduct=225c, bcdDevice= 0.01
[ 2211.437018] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2211.437022] usb 2-2: Product: AS2235
[ 2211.437026] usb 2-2: Manufacturer: ASMedia
[ 2211.437029] usb 2-2: SerialNumber: 00000000000000000000
[ 2211.445936] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2211.446375] scsi host0: usb-storage 2-2:1.0
[ 2211.651322] usb 2-2: USB disconnect, device number 3
[ 2215.471708] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
[ 2215.493094] usb 2-1: New USB device found, idVendor=174c, idProduct=225c, bcdDevice= 0.01
[ 2215.493113] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2215.493126] usb 2-1: Product: AS2235
[ 2215.493135] usb 2-1: Manufacturer: ASMedia
[ 2215.493144] usb 2-1: SerialNumber: 00000000000000000000
[ 2215.495813] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2215.496465] scsi host0: usb-storage 2-1:1.0
[ 2216.524193] scsi 0:0:0:0: Direct-Access ASMT 2235 0 PQ: 0 ANSI: 6
[ 2216.525226] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2216.527248] sd 0:0:0:0: [sda] Spinning up disk...
[ 2217.547366] ..ready
[ 2218.572569] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2218.573208] sd 0:0:0:0: [sda] Write Protect is off
[ 2218.573222] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2218.573853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2218.592387] sda: sda1
[ 2218.592959] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2420.572715] systemd[6101]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 2420.860685] systemd-journald[232]: File /var/log/journal/cc947b5b16844114bb4865e4ee5048a0/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 2433.162805] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s
[ 2433.162821] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x3 [current]
[ 2433.162826] sd 0:0:0:0: [sda] tag#0 ASC=0x11 ASCQ=0x0
[ 2433.162832] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 2433.162836] critical medium error, dev sda, sector 0 op 0x0
READ) flags 0x0 phys_seg 1 prio class 2
[ 2433.162844] Buffer I/O error on dev sda, logical block 0, async page read
[ 2433.163877] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s
[ 2433.163882] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x3 [current]
[ 2433.163886] sd 0:0:0:0: [sda] tag#0 ASC=0x11 ASCQ=0x0
[ 2433.163890] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 2433.163893] critical medium error, dev sda, sector 0 op 0x0
READ) flags 0x0 phys_seg 1 prio class 2
[ 2433.163898] Buffer I/O error on dev sda, logical block 0, async page read
[ 2433.164911] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s
[ 2433.164920] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x3 [current]
[ 2433.164924] sd 0:0:0:0: [sda] tag#0 ASC=0x11 ASCQ=0x0
[ 2433.164929] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 2433.164932] critical medium error, dev sda, sector 0 op 0x0
READ) flags 0x0 phys_seg 1 prio class 2
[ 2433.164938] Buffer I/O error on dev sda, logical block 0, async page read
[ 2729.679425] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s
[ 2729.679457] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x3 [current]
[ 2729.679470] sd 0:0:0:0: [sda] tag#0 ASC=0x11 ASCQ=0x0
[ 2729.679485] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 08 02 00 00 02 00
[ 2729.679496] critical medium error, dev sda, sector 2050 op 0x0
READ) flags 0x1000 phys_seg 1 prio class 2
[ 2729.679550] EXT4-fs (sda1): unable to read superblock
Any assistance will be greatly appreciated. when connected to a live boot of mint, the drive is visible
