proxim orinoco silver wireless combocard a/b/g
 

Hi,
I have a proxim orinoco silver combocard a/b/g. I am using that in combination with an isa to pcmcia adapter. This is running on a redhat 9 box. When pcmcia starts up, cardmgr states that it is watching two sockets, so I assume it is seeing the adapter card. But when i run cardctl ident , I get
Socket 0:
no product info available
Socket 1:
no product info available

Here is a snippet of my messages file when starting pcmcia:

Aug 29 11:47:24 gateway kernel: Linux Kernel Card Services 3.1.22
Aug 29 11:47:24 gateway kernel: options: [pci] [cardbus] [pm]
Aug 29 11:47:25 gateway kernel: Intel PCIC probe:
Aug 29 11:47:25 gateway kernel: Vadem VG-469 ISA-to-PCMCIA at port 0x3e2 ofs 0x00, 2 sockets
Aug 29 11:47:25 gateway kernel: host opts [0]: none
Aug 29 11:47:25 gateway kernel: host opts [1]: none
Aug 29 11:47:25 gateway kernel: ISA irqs (scanned) = 3,4,5,7,9,11,12 status change on irq 11
Aug 29 11:47:25 gateway cardmgr[27285]: starting, version is 3.1.31
Aug 29 11:47:25 gateway cardmgr[27285]: watching 2 sockets
Aug 29 11:47:25 gateway cardmgr[27285]: Card Services release does not match
Aug 29 11:47:25 gateway kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Aug 29 11:47:25 gateway kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x428-0x42f 0x4d0-0x4d7
Aug 29 11:47:25 gateway kernel: cs: IO port probe 0x0a00-0x0aff: clean.

So, does anyone have any suggestions on how to have the system at least see that a card is inserted?