LinuxQuestions.org - How to simulate GPSR in ns2.35?

- Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)

- - How to simulate GPSR in ns2.35? (https://www.linuxquestions.org/questions/linux-software-2/how-to-simulate-gpsr-in-ns2-35-a-4175538084/)

How to simulate GPSR in ns2.35?

Hello everyone.

I'm using Ns2.35 in ubuntu 14.04.
I want to simulate GPSR routing protocol on it, but it's not work.
Maybe code is wrong (i download it on the internet) or GPSR doesn't work on ns2.35, i think.
this is the code of GPSR.

Code:

# author: Thomas Ogilvie

# sample tcl script showing the use of GPSR and HLS (hierarchical location service)





## GPSR Options

Agent/GPSR set bdesync_                0.5 ;# beacon desync random component

Agent/GPSR set bexp_                  [expr 3*([Agent/GPSR set bint_]+[Agent/GPSR set bdesync_]*[Agent/GPSR set bint_])] ;# beacon timeout interval

Agent/GPSR set pint_                  1.5 ;# peri probe interval

Agent/GPSR set pdesync_                0.5 ;# peri probe desync random component

Agent/GPSR set lpexp_                  8.0 ;# peris unused timeout interval

Agent/GPSR set drop_debug_            1  ;#

Agent/GPSR set peri_proact_            1          ;# proactively generate peri probes

Agent/GPSR set use_implicit_beacon_    1  ;# all packets act as beacons; promisc.

Agent/GPSR set use_timed_plnrz_        0  ;# replanarize periodically

Agent/GPSR set use_congestion_control_ 0

Agent/GPSR set use_reactive_beacon_    0  ;# only use reactive beaconing



set opt(bint)          1.0 ;# beacon interval

set opt(use_mac)        1    ;# use link breakage feedback from MAC

set opt(use_peri)      1    ;# probe and use perimeters

set opt(use_planar)    1    ;# planarize graph

set opt(verbose)        1    ;#

set opt(use_beacon)    1    ;# use beacons at all

set opt(use_reactive)  0    ;# use reactive beaconing

set opt(locs)          0    ;# default to OmniLS

set opt(use_loop)      0    ;# look for unexpected loops in peris



set opt(agg_mac)          1 ;# Aggregate MAC Traces

set opt(agg_rtr)          0 ;# Aggregate RTR Traces

set opt(agg_trc)          0 ;# Shorten Trace File





set opt(chan)                Channel/WirelessChannel

set opt(prop)                Propagation/TwoRayGround

set opt(netif)                Phy/WirelessPhy

set opt(mac)                Mac/802_11

set opt(ifq)                Queue/DropTail/PriQueue

set opt(ll)                LL

set opt(ant)                Antenna/OmniAntenna

set opt(x)                1020      ;# X dimension of the topography

set opt(y)                1020      ;# Y dimension of the topography

set opt(ifqlen)                512      ;# max packet in ifq

set opt(seed)                1.0

set opt(adhocRouting)        GPSR      ;# AdHoc Routing Protocol

set opt(nn)                60      ;# how many nodes are simulated

set opt(stop)                300.0    ;# simulation time

set opt(use_gk)                0          ;# > 0: use GridKeeper with this radius

set opt(zip)                0        ;# should trace files be zipped



set opt(agttrc)        ON ;# Trace Agent

set opt(rtrtrc)        ON ;# Trace Routing Agent

set opt(mactrc)        OFF ;# Trace MAC Layer

set opt(movtrc)        OFF;# Trace Movement





set opt(lt)                ""

set opt(cp)                "./cbr/n60/n60_ms15_rate025_size64_seed2"

set opt(sc)                "./scenario/n60/d500_n60_x1020_y1020_h10_l0_p0"



set opt(out)            "result_gpsr.tr"



Agent/GPSR set locservice_type_ 2



Agent/GPSR set bint_                  $opt(bint)

# Recalculating bexp_ here

Agent/GPSR set bexp_                [expr 3*([Agent/GPSR set bint_]+[Agent/GPSR set bdesync_]*[Agent/GPSR set bint_])] ;# beacon timeout interval

Agent/GPSR set use_peri_              $opt(use_peri)

Agent/GPSR set use_planar_            $opt(use_planar)

Agent/GPSR set use_mac_              $opt(use_mac)

Agent/GPSR set use_beacon_            $opt(use_beacon)

Agent/GPSR set verbose_              $opt(verbose)

Agent/GPSR set use_reactive_beacon_  $opt(use_reactive)

Agent/GPSR set use_loop_detect_      $opt(use_loop)



CMUTrace set aggregate_mac_          $opt(agg_mac)

CMUTrace set aggregate_rtr_          $opt(agg_rtr)



# seeding RNG

ns-random $opt(seed)



# create simulator instance

set ns_                [new Simulator]



set loadTrace  $opt(lt)



set topo        [new Topography]

$topo load_flatgrid $opt(x) $opt(y)



set tracefd        [open $opt(out) w]



$ns_ trace-all $tracefd



set chanl [new $opt(chan)]



# Create God

set god_ [create-god $opt(nn)]



# Attach Trace to God

set T [new Trace/Generic]

$T attach $tracefd

$T set src_ -5

$god_ tracetarget $T



#

# Define Nodes

#

puts "AdHoc Routing Protocol ($opt(adhocRouting))"

puts "Configuring Nodes ($opt(nn))"

puts "Time Simulation ($opt(stop))"

$ns_ node-config -adhocRouting $opt(adhocRouting) \

                -llType $opt(ll) \

                -macType $opt(mac) \

                -ifqType $opt(ifq) \

                -ifqLen $opt(ifqlen) \

                -antType $opt(ant) \

                -propType $opt(prop) \

                -phyType $opt(netif) \

                -channel $chanl \

                -topoInstance $topo \

                -wiredRouting OFF \

                -mobileIP OFF \

                -agentTrace $opt(agttrc) \

                -routerTrace $opt(rtrtrc) \

                -macTrace $opt(mactrc) \

                -movementTrace $opt(movtrc)



#

#  Create the specified number of nodes [$val(nn)] and "attach" them

#  to the channel. 

for {set i 0} {$i < $opt(nn) } {incr i} {

    set node_($i) [$ns_ node]

    $node_($i) random-motion 0                ;# disable random motion

        set ragent [$node_($i) set ragent_]

        $ragent install-tap [$node_($i) set mac_(0)]



    if { $opt(mac) == "Mac/802_11" } {      

        # bind MAC load trace file

        [$node_($i) set mac_(0)] load-trace $loadTrace

    }



    # Bring Nodes to God's Attention

    $god_ new_node $node_($i)

}



source $opt(sc)



source $opt(cp)



#

# Tell nodes when the simulation ends

#

for {set i 0} {$i < $opt(nn) } {incr i} {

    $ns_ at $opt(stop).0 "$node_($i) reset";

}



$ns_ at  $opt(stop).0002 "puts \"NS EXITING... $opt(out)\" ; $ns_ halt"



puts "Starting Simulation..."

$ns_ run

Can you help me,
Thanks for your time.

So where did you get this sketchy old copy of "hls.tcl" ?
A link, please.

The new version of `hls.tcl' : See ns-2.3x/hls/utils/

All GPSR-hls examples : gpsr-hls-examples-05.14.tar.gz
https://drive.google.com/file/d/0B7S...ew?usp=sharing
130sec-1f-hls-1.tcl
150-2f-hls-2.tcl
AGT-on__hls.tcl
hls.tcl
run.tcl
smac_hls.tcl
smac_ssoumayaa.tcl
ssoumayaa-0.tcl
ssoumayaa-802.15.4.tcl
ssoumayaa.tcl
tes-gpsr.tcl

GPSR info, see posts #2 and #3 here ...
http://www.linuxquestions.org/questi...-4175528835/#2
... And yes, GPSR-hls works OK with ns-2.35 .

! Code must be shown in CODE Tags ...
. http://www.linuxquestions.org/questi....php?do=bbcode
. http://www.linuxquestions.org/questi...gs-4175464257/
I.e. the ` # ' button in the 'Advanced Editor'.
Or type [/code] at code end, and [code] at code start.
* Please edit post #1.
* Editing post #1 : That's the 'Edit' button in post #1.
.... And no bold typing. Bold is for a single word.

-

#2
thank knudfl,
the link of that GPSR i have downloaded long time ago and i didn't remember.
i will reading that link you give me. thank a lot!

#2
Dear knudfl
I have sucseccfully run GPSR in ns2 by folow this guid.

Code:

> patch GPSR in ns-2.35 



$ tar xvf ns-allinone-2.35_gcc482.tar.gz ( Patched for gcc-4.8.2 and -4.9.1 ). 

https://drive.google.com/file/d/0B7S255p3kFXNSGJCZ2YzUGJDVk0/view?usp=sharing

$ cd ns-allinone-2.35/ 

$ patch -p0 < GPSR-hls_ns235.patch 

https://drive.google.com/file/d/0B7S255p3kFXNcGFJbGttY2dLT2M/view?usp=sharing

$ ./install 

$ cd ns-2.35/ 

$ cp ns ns-gpsr-hls 

$ sudo cp ns-gpsr-hls /usr/local/bin/ 

... Then you can do: $ ns-gpsr-hls ssoumayaa.tcl 

... from the examples, gpsr-hls-examples-05.14.tar.gz 

https://drive.google.com/file/d/0B7S255p3kFXNVDVyb190WVdyOVE/view?usp=sharing

and this is result

Code:

phuc@ubuntu:~/Desktop/simulation/gpsr-hls-examples-05.14/hls-utils$ ns-gpsr-hls ssoumayaa.tcl 

num_nodes is set 2

INITIALIZE THE LIST xListHead

Starting Simulation...

radiorange 250, x 2000 y 500

length : 3.000000 , cellperline 12 , heigth 1.000000

maxlevel 3

radiorange 250, x 2000 y 500

length : 3.000000 , cellperline 12 , heigth 1.000000

maxlevel 3

SORTING LISTS ...DONE!

can you show me how to run NAM file to see nodes move and communicate with each other.
thank for your time!
Regards!

Nam : $ cd ns-allinone-2.35/nam-1.15/
$ sudo make install

The nam output file from the ssoumayaa.tcl simulation is fangzhen1.nam :
$ nam fangzhen1.nam
... But not much activity. Please try out the other simulation files.

The "scene file" kordinat_20_20.scn for tes-gpsr.tcl is missing in the "05.14 examples".
Please get this new package : gpsr-hls-examples-03.15.tar.gz
https://drive.google.com/file/d/0B7S...ew?usp=sharing

-

#5
Thank you so much!
I am working on it.

Dear knudfl
I was install another Ns2.35 to instanll GPSR-Keliu on it.
From #2,#3 of this link :http://www.linuxquestions.org/questi...-4175528835/#2
But when i do this: $ns-gpsr-keliu (name).tcl to simulate but it doesn't work.
When i install GPSR-hls, i have download this file be for install : ns-allinone-2.35_gcc482.tar.gz
But, when i install GPSR-KEliu, i didn't see any kind of that file in the link above.

Can you help me for this problem? Thank you so much!

Re #7.

Quote:

when I install GPSR-Keliu, I didn't see any kind of that file in the link above

? Which link ? Which post ? Which file ?

#8
i was download gpsr-keliu-patch from this: #3 http://www.linuxquestions.org/questi...-4175528835/#2

GPSR-KeLiu, ns235
https://drive.google.com/file/d/0B7S...ew?usp=sharing

gpsr-KeLiu_ns235.patch
and i already patch gpsr-keliu on ns2.35, but when i do this: ns-gpsr-keliu <name>.tcl
have the error that: ns-gpsr-keliu command not found
Thanks

Re #9.

The command 'ns-gpsr-keliu' can be used only if you create the file 'ns-gpsr-keliu':
$ cd ns-2.35/
$ cp ns ns-gpsr-keliu
$ sudo cp ns-gpsr-keliu /usr/local/bin/

-

Dear knudfl
I try to run GPSR in ns2 but when i use this code
Code: patch -p0 < GPSR-hls_ns235.patch
i have an error which is
bash: GPSR-hls_ns235.patch: No such file or directory

Re post #11, @ranoucha : Welcome to LQ.

The easy way : Copy the file GPSR-hls_ns235.patch to ns-allinone-2.35/.
I.e. the patch must be present when using the command $ patch -p0 < GPSR-hls_ns235.patch

(Also possible with $ patch -p0 < /home/ranoucha/Downloads/GPSR-hls_ns235.patch ,,,
if you are keeping the file in Downloads/).

* Build example http://network-simulator-ns-2.7690.n...g-td29371.html

-

I did it but when i want to run ssoumayaa.tcl using this code:
ns-gpsr-hls ssoumayaa.tcl

i have

INITIALIZE THE LIST xListHead Starting Simulation... Segmentation fault (core dumped)

Re #13.

? Which "Linux OS" are you using ?
a) Please show the output from this command : $ uname -m
b) OS name and version, please.

NS-2 is old.
And the latest updates for several OS`s have made some protocols / simulations fail.

-

i am using ubuntu 14.04 with ns2.35