turborocket |
11-06-2004 05:54 AM |
hy guyx:D
this is my first 3d here:D
sorry 4 my english but it is so cheap!
well, im using gentoo with kernel 2.6.8r10 on an acer laptot(tm1304xc)
i configured all...but i not abel to know why my pcmci-->usb2 card dont work...
i explain.I've a mp3player(1.5gb)usb2.0, when i plugit up my standard usb,on the back of my laptop,it tell me tath it was plug to pc.
the problem is tath it dont do the same when i plug it to cardbus!!!so i understand the cardbus is not great configured....
i've already set my kernel(or i hope ive does it good)and install pcmci-cs
this is any output line
Code:
root@porno-->/etc/init.d # lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
[CUT]
Code:
root@porno-->/etc/init.d # lsmod
Module Size Used by
sr_mod 14884 0
subfs 9984 3
ide_scsi 15108 0
Code:
root@porno-->/etc/init.d # dmesg | grep -A 20 'Linux Kernel Card Services'
Linux Kernel Card Services
options: [pci] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:11.6[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Cannot allocate resource region 0 of device 0000:00:0a.0
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
vesafb: S3 Incorporated., VBE 2.0, Rev 1.1 (OEM: S3 Incorporated. Twister BIOS)
vesafb: VBE version: 2.0
Code:
root@porno-->/etc/init.d # dmesg
Linux version 2.6.8-gentoo-r10 (root@porno) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #12 SMP Thu Nov 4 18:15:18 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
223MB LOWMEM available.
On node 0 totalpages: 57328
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 53232 pages, LIFO batch:12
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e4010
ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 _CSI 0x00010101) @ 0x0dfffbc0
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x0dfffac0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x0dfffb50
ACPI: DBGP (v001 INSYDE SYS_DBGP 0x00000100 _CSI 0x00010101) @ 0x0dfffb80
ACPI: DSDT (v001 INSYDE VT8362 0x00001000 MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line: ro root=/dev/hda3 video=vesafb:ywrap,pmipal,1024x768-32@60 splash=silent,theme:emergence
fbsplash: silent
fbsplash: theme emergence
No local APIC present or hardware disabled
Initializing CPU#0
CPU 0 irqstacks, hard=c05ca000 soft=c05c2000
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1533.348 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 220540k/229312k available (3345k kernel code, 8084k reserved, 1255k data, 244k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3022.84 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
CPU0: AMD mobile AMD Athlon(tm) XP 1800+ stepping 01
per-CPU timeslice cutoff: 731.39 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0: online
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
checking if image is initramfs... it is
Freeing initrd memory: 588k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1)
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:11.6[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Cannot allocate resource region 0 of device 0000:00:0a.0
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
vesafb: S3 Incorporated., VBE 2.0, Rev 1.1 (OEM: S3 Incorporated. Twister BIOS)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:788a
vesafb: pmi: set display start = c00c7914, set palette = c00c795d
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=4096
vesafb: framebuffer at 0x90000000, mapped to 0xce807000, size 16384k
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x37 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1099739601.4294965949:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.15 [Flags: R/O].
udf: registering filesystem
Initializing Cryptographic API
Applying VIA southbridge workaround.
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (29 C)
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio4
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 0
inotify init: minor=62
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xf0000000, 00:c0:9f:23:7f:c8, IRQ 11.
eth0: MII PHY found at address 1, status 0x7829 advertising 01e1 Link 45e1.
PPP generic driver version 2.4.2
Linux video capture interface: v1.00
Colour QuickCam for Video4Linux v0.05
parport0 (bw-qcam): use data_reverse for this!
Mediavision Pro Movie Studio driver 0.02
PMS type is 0
Board not found.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N020ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
Intel ISA PCIC probe: not found.
Device 'i823650' does not have a release() function, it is broken and must be fixed.
Badness in device_release at drivers/base/core.c:85
[<c02301d8>] kobject_cleanup+0x98/0xa0
[<c05a154a>] init_i82365+0x1ca/0x200
[<c059e4d1>] init_raw1394+0xd1/0x100
[<c05809cc>] do_initcalls+0x2c/0xc0
[<c01330a7>] init_workqueues+0x17/0x2e
[<c0100534>] init+0x94/0x1f0
[<c01004a0>] init+0x0/0x1f0
[<c01042b1>] kernel_thread_helper+0x5/0x14
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: irq 11, io base 00001200
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver touchkitusb
usbcore: registered new driver cytherm
drivers/usb/misc/cytherm.c: v1.0:Cypress USB Thermometer driver
usbcore: registered new driver phidgetservo
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
usb 1-1: new low speed USB device using address 2
ALSA device list:
#0: VIA 82C686A/B rev40 at 0xe000, irq 10
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ip_conntrack version 2.1 (1791 buckets, 14328 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:11.2-1
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 133.334 MHz
powernow: Found PSB header at c00e5100
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 1 PST tables. (Only dumping ones relevant to this CPU).
powernow: No PST tables match this cpuid (0x781)
powernow: This is indicative of a broken BIOS.
powernow: Trying ACPI perflib
powernow: acpi: P0: 950 MHz 24000 mW 125 uS control 009c418d SGTC 10000
powernow: FID: 0xd (9.5x [1266MHz]) VID: 0xc (1.400V)
powernow: acpi: P1: 750 MHz 16337 mW 125 uS control 009c41c9 SGTC 10000
powernow: FID: 0x9 (7.5x [1000MHz]) VID: 0xe (1.300V)
powernow: acpi: P2: 700 MHz 15248 mW 125 uS control 009c41c8 SGTC 10000
powernow: FID: 0x8 (7.0x [933MHz]) VID: 0xe (1.300V)
powernow: acpi: P3: 600 MHz 12084 mW 125 uS control 009c4226 SGTC 10000
powernow: FID: 0x6 (6.0x [800MHz]) VID: 0x11 (1.250V)
powernow: acpi: P4: 500 MHz 9280 mW 125 uS control 009c4264 SGTC 10000
powernow: FID: 0x4 (5.0x [666MHz]) VID: 0x13 (1.200V)
powernow: Minimum speed 666 MHz. Maximum speed 1266 MHz.
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S4bios S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 244k freed
Adding 506512k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
subfs 0.9
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
fbsplash: switching to verbose mode
mtrr: 0x90000000,0x2000000 overlaps existing 0x90000000,0x1000000
spurious 8259A interrupt: IRQ7.
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
subfs: submountd execution failure. Error 256
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
subfs: submountd execution failure. Error 256
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
subfs: submountd execution failure. Error 256
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
subfs: submountd execution failure. Error 256
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
subfs: submountd execution failure. Error 256
:Pengy:
hlp plz:(
|