| NicoD SBC |
10-22-2022 11:34 AM |
Video : Review of the Banana Pi M5 with Armbian
Hello all.
I made a review video about the Banana Pi M5.
This comes with the Amlogic S905X3 SoC. A nice board, might be a good RPi4 alternative.
Here is the video.
https://www.youtube.com/watch?v=hc3fdjwfi4M
There is also a give away for the BPi M5 and M2Pro at Armbian.
https://forum.armbian.com/topic/2407...ng-a-giveaway/
Here all my gathered information.
Code:
BPi M5
------
Benchmarks
----------
Board | OS | Kernel | Clockspeeds | 7z b all cores | 7z b core small core | 7z b big core | NicoD Blender | Supertuxkart | GLMark2 score | Memcpy | Memset | SBC-Bench | CPU Miner
Banana Pi M5 Armbian Sid xfce4 5.19.14-meson64 2.1Ghz A55 7235 1900 (core 0) xxx 4fps 3360.0 MB/s 5105.6 MB/s http://ix.io/4cWz
Banana Pi M5 Armbian Jammy xfce4 5.19.15-meson64 2.1Ghz A55 7278 1923 (core 0) 16m37s 4fps 261 3482 MB/s 5112.6 MB/s http://ix.io/4d2M
Banana Pi M5 Armbian Bullseye xfce4 5.19.15-meson64 2.1Ghz A55 7638 1953 (core 0) 22m53s 19fps 3449.2 MB/s 5107.9 MB/s http://ix.io/4d4E 7.7
Banana Pi M5 Armbian Bullseye headless 5.19.15-meson64 2.1Ghz A55 7619 1955 (core 0) 21m43s 3674.3 MB/s 5154.3 MB/s http://ix.io/4d5C 7.9
Bullseye is using blender 2.83-5
Jammy is using blender 3.0.1
Temperatures
------------
2.1Ghz idle ondemand display : 52C
2.1Ghz maxed out display : 79C
2.1Ghz idle ondemand display heatsink : 47C
2.1Ghz maxed out display heatsink : 76C
2.1Ghz idle headless : 37C
2.1Ghz Maxed out headless : 70c
Power consumption @ 5V
-----------------
hdmi + wifi + keyboard - Idle 0.45A (0.08A for wifi)
hdmi + wifi + keyboard - maxed out 0.75A
no hdmi no wifi no keyboard - idle 0.2A
no hdmi no wifi no keyboard - maxed out 0.63A
Transfer rates
--------------
SD read SD write eMMC read eMMC write access time USB3 read USB3 write access time
23.9 MB/s 16 MB/s 174 MB/s 32.6 MB/s 0.17 msec 375.4 MB/s 342.4 MB/s 0.18 msec
5.10 images do not boot
5.19 images have a problem with reboot. When sd-card is inserted with an image and also an image on eMMC is present, it will reboot into eMMC instead of SD.
"so uboot can't read MMC/SD if it's set to "fast". from cold boot, MMC is set to "slow", then Kernel sets it to "fast". So when warm-boot, when uboot runs it's set to "fast" due to kernel and everything fails"
5.19 Jammy and Sid images perform very bad with tuxkart while bullseye performs good / Maybe driver issue, panfrost not working while noted to be working in glxinfo -B
Specs
-----
Amlogic S905X3 4 x A55 @ 1.9Ghz (oc 2.1Ghz) 12 nm 1 MB cache
ARM Mali-G31 MP2 @ 850 Mhz
4GB LPDDR4
microSD slot
16GB eMMC
4 x USB3
GbE
HDMI 2.1 up to 4K60
3.5mm audio jack
IR
40-pin GPIO
Powered by 5V USB Type-C
|
